Lines Matching +full:fixed +full:- +full:burst
1 // SPDX-License-Identifier: GPL-2.0-only
3 * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
13 cpu0-supply = <&vcc>;
23 compatible = "regulator-fixed";
24 regulator-name = "VEMMC";
25 regulator-min-microvolt = <2900000>;
26 regulator-max-microvolt = <2900000>;
28 startup-delay-us = <150>;
29 enable-active-high;
33 compatible = "regulator-fixed";
34 regulator-name = "VWLAN";
36 enable-active-high;
40 compatible = "gpio-leds";
45 linux,default-trigger = "default-on";
46 pinctrl-names = "default";
47 pinctrl-0 = <&debug_leds>;
53 compatible = "fixed-clock";
54 #clock-cells = <0>;
55 clock-frequency = <38400000>;
60 accelerator_pins: accelerator-pins {
61 pinctrl-single,pins = <
62 OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4) /* mcspi2_somi.gpio_180 -> LIS302 INT1 */
63 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4) /* mcspi2_cs0.gpio_181 -> LIS302 INT2 */
67 debug_leds: debug-led-pins {
68 pinctrl-single,pins = <
73 mmc2_pins: mmc2-pins {
74 pinctrl-single,pins = <
84 wlan_pins: wlan-pins {
85 pinctrl-single,pins = <
86 OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */
87 OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */
91 ssi_pins: ssi-pins {
92 pinctrl-single,pins = <
104 ssi_pins_idle: ssi-idle-pins {
105 pinctrl-single,pins = <
117 modem_pins1: modem-core1-pins {
118 pinctrl-single,pins = <
125 uart2_pins: uart2-pins {
126 pinctrl-single,pins = <
136 modem_pins2: modem-core2-pins {
137 pinctrl-single,pins = <
144 clock-frequency = <2900000>;
149 interrupt-parent = <&intc>;
159 compatible = "ti,twl4030-power";
170 regulator-name = "vdac";
171 regulator-min-microvolt = <1800000>;
172 regulator-max-microvolt = <1800000>;
176 regulator-name = "vpll1";
177 regulator-min-microvolt = <1800000>;
178 regulator-max-microvolt = <1800000>;
182 regulator-name = "vpll2";
183 regulator-min-microvolt = <1800000>;
184 regulator-max-microvolt = <1800000>;
188 regulator-name = "vaux1";
189 regulator-min-microvolt = <2800000>;
190 regulator-max-microvolt = <2800000>;
193 /* CSI-2 receiver */
195 regulator-name = "vaux2";
196 regulator-min-microvolt = <1800000>;
197 regulator-max-microvolt = <1800000>;
202 regulator-name = "vaux3";
203 regulator-min-microvolt = <2800000>;
204 regulator-max-microvolt = <2800000>;
208 regulator-name = "vaux4";
209 regulator-min-microvolt = <2800000>;
210 regulator-max-microvolt = <2800000>;
214 regulator-name = "vmmc1";
215 regulator-min-microvolt = <1850000>;
216 regulator-max-microvolt = <3150000>;
220 regulator-name = "vmmc2";
221 regulator-min-microvolt = <3000000>;
222 regulator-max-microvolt = <3000000>;
226 regulator-name = "vintana1";
227 regulator-min-microvolt = <1500000>;
228 regulator-max-microvolt = <1500000>;
232 regulator-name = "vintana2";
233 regulator-min-microvolt = <2750000>;
234 regulator-max-microvolt = <2750000>;
238 regulator-name = "vintdig";
239 regulator-min-microvolt = <1500000>;
240 regulator-max-microvolt = <1500000>;
244 regulator-name = "vsim";
245 regulator-min-microvolt = <1800000>;
246 regulator-max-microvolt = <1800000>;
250 regulator-name = "vio";
251 regulator-min-microvolt = <1800000>;
252 regulator-max-microvolt = <1800000>;
256 clock-frequency = <400000>;
259 #address-cells = <1>;
260 #size-cells = <0>;
265 flash-timeout-us = <150000>;
266 flash-max-microamp = <320000>;
267 led-max-microamp = <60000>;
268 ams,input-max-microamp = <1750000>;
272 led-max-microamp = <10000>;
278 clock-frequency = <400000>;
284 Vdd-supply = <&vaux1>;
285 Vdd_IO-supply = <&vio>;
287 pinctrl-names = "default";
288 pinctrl-0 = <&accelerator_pins>;
290 …interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180…
293 st,click-single-x;
294 st,click-single-y;
295 st,click-single-z;
298 st,click-threshold-x = <8>;
299 st,click-threshold-y = <8>;
300 st,click-threshold-z = <10>;
303 st,click-time-limit = <9>;
306 st,click-latency = <50>;
308 st,wakeup-x-hi;
309 st,wakeup-y-hi;
310 st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
312 st,wakeup2-z-hi;
313 st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */
315 st,highpass-cutoff-hz = <2>;
318 st,irq1-ff-wu-1;
319 st,irq1-ff-wu-2;
321 st,irq2-click;
323 st,wu-duration-1 = <8>;
324 st,wu-duration-2 = <8>;
333 pinctrl-names = "default";
334 pinctrl-0 = <&mmc2_pins>;
335 vmmc-supply = <&vemmc>;
336 bus-width = <4>;
337 ti,non-removable;
350 interface-type = <0>;
351 usb-phy = <&usb2_phy>;
353 phy-names = "usb2-phy";
362 #address-cells = <1>;
363 #size-cells = <1>;
364 compatible = "ti,omap2-onenand";
380 gpmc,sync-read;
381 gpmc,sync-write;
382 gpmc,burst-length = <16>;
383 gpmc,burst-read;
384 gpmc,burst-wrap;
385 gpmc,burst-write;
386 gpmc,device-width = <2>;
387 gpmc,mux-add-data = <2>;
388 gpmc,cs-on-ns = <0>;
389 gpmc,cs-rd-off-ns = <122>;
390 gpmc,cs-wr-off-ns = <122>;
391 gpmc,adv-on-ns = <0>;
392 gpmc,adv-rd-off-ns = <15>;
393 gpmc,adv-wr-off-ns = <15>;
394 gpmc,oe-on-ns = <20>;
395 gpmc,oe-off-ns = <122>;
396 gpmc,we-on-ns = <0>;
397 gpmc,we-off-ns = <122>;
398 gpmc,rd-cycle-ns = <148>;
399 gpmc,wr-cycle-ns = <148>;
400 gpmc,access-ns = <117>;
401 gpmc,page-burst-access-ns = <15>;
402 gpmc,bus-turnaround-ns = <0>;
403 gpmc,cycle2cycle-delay-ns = <0>;
404 gpmc,wait-monitoring-ns = <0>;
405 gpmc,clk-activation-ns = <10>;
406 gpmc,wr-data-mux-bus-ns = <40>;
407 gpmc,wr-access-ns = <117>;
409 gpmc,sync-clk-ps = <15000>; /* TBC; Where this value came? */
440 label = "omap2-onenand";
447 pinctrl-names = "default", "idle";
448 pinctrl-0 = <&ssi_pins>;
449 pinctrl-1 = <&ssi_pins_idle>;
451 ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
453 modem: hsi-client {
454 pinctrl-names = "default";
455 pinctrl-0 = <&modem_pins1 &modem_pins2>;
457 hsi-channel-ids = <0>, <1>, <2>, <3>;
458 hsi-channel-names = "mcsaab-control",
459 "speech-control",
460 "speech-data",
461 "mcsaab-data";
462 hsi-speed-kbps = <96000>;
463 hsi-mode = "frame";
464 hsi-flow = "synchronized";
465 hsi-arb-mode = "round-robin";
467 interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */
472 gpio-names = "cmt_apeslpx",
483 pinctrl-names = "default";
484 pinctrl-0 = <&uart2_pins>;
487 compatible = "ti,wl1271-bluetooth-nokia", "nokia,h4p-bluetooth";
489 reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; /* 26 */
490 host-wakeup-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* 101 */
491 bluetooth-wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* 37 */
494 clock-names = "sysclk";