Lines Matching +full:cycle2cycle +full:- +full:samecsen
1 // SPDX-License-Identifier: GPL-2.0-or-later
5 /dts-v1/;
7 #include "omap3-lilly-a83x.dtsi"
10 model = "INCOstartec LILLY-DBB056 (DM3730)";
11 …compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,…
15 vaux2: regulator-vaux2 {
16 compatible = "ti,twl4030-vaux2";
17 regulator-min-microvolt = <2800000>;
18 regulator-max-microvolt = <2800000>;
19 regulator-always-on;
24 pinctrl-names = "default";
25 pinctrl-0 = <&lcd_pins>;
27 lan9117_pins: lan9117-pins {
28 pinctrl-single,pins = <
33 gpio4_pins: gpio4-pins {
34 pinctrl-single,pins = <
35 OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* cam_xclkb.gpio_111 -> sja1000 IRQ */
39 gpio5_pins: gpio5-pins {
40 pinctrl-single,pins = <
41 …PAD(0x218c, PIN_OUTPUT | PIN_OFF_OUTPUT_HIGH | MUX_MODE4) /* mcbsp1_clk.gpio_156 -> enable DSS */
45 lcd_pins: lcd-pins {
46 pinctrl-single,pins = <
72 mmc2_pins: mmc2-pins {
73 pinctrl-single,pins = <
84 OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 -> wp */
85 OMAP3_CORE1_IOPAD(0x219c, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_rts_sd.gpio_164 -> cd */
89 spi1_pins: spi1-pins {
90 pinctrl-single,pins = <
100 pinctrl-names = "default";
101 pinctrl-0 = <&gpio4_pins>;
105 pinctrl-names = "default";
106 pinctrl-0 = <&gpio5_pins>;
111 bus-width = <4>;
112 vmmc-supply = <&vmmc1>;
113 cd-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164 */
114 wp-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* gpio_163 */
115 pinctrl-names = "default";
116 pinctrl-0 = <&mmc2_pins>;
117 ti,dual-volt;
122 pinctrl-names = "default";
123 pinctrl-0 = <&spi1_pins>;
133 bank-width = <2>;
134 gpmc,mux-add-data = <2>;
135 gpmc,cs-on-ns = <10>;
136 gpmc,cs-rd-off-ns = <65>;
137 gpmc,cs-wr-off-ns = <65>;
138 gpmc,adv-on-ns = <0>;
139 gpmc,adv-rd-off-ns = <10>;
140 gpmc,adv-wr-off-ns = <10>;
141 gpmc,oe-on-ns = <10>;
142 gpmc,oe-off-ns = <65>;
143 gpmc,we-on-ns = <10>;
144 gpmc,we-off-ns = <65>;
145 gpmc,rd-cycle-ns = <100>;
146 gpmc,wr-cycle-ns = <100>;
147 gpmc,access-ns = <60>;
148 gpmc,page-burst-access-ns = <5>;
149 gpmc,bus-turnaround-ns = <0>;
150 gpmc,cycle2cycle-delay-ns = <75>;
151 gpmc,wr-data-mux-bus-ns = <15>;
152 gpmc,wr-access-ns = <75>;
153 gpmc,cycle2cycle-samecsen;
154 gpmc,cycle2cycle-diffcsen;
155 vddvario-supply = <®_vcc3>;
156 vdd33a-supply = <®_vcc3>;
157 reg-io-width = <4>;
158 interrupt-parent = <&gpio4>;
161 pinctrl-names = "default";
162 pinctrl-0 = <&lan9117_pins>;
163 phy-mode = "mii";
164 smsc,force-internal-phy;