Lines Matching +full:cycle2cycle +full:- +full:samecsen
1 // SPDX-License-Identifier: GPL-2.0-only
6 #include <dt-bindings/input/input.h>
16 compatible = "gpio-leds";
18 led-heartbeat {
20 gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */
21 default-state = "on";
22 linux,default-trigger = "heartbeat";
25 led-mmc {
27 gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */
28 default-state = "on";
29 linux,default-trigger = "none";
32 led-usr {
34 gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */
35 default-state = "on";
36 linux,default-trigger = "usr";
39 led-pmu-stat {
46 compatible = "ti,omap-twl4030";
50 ti,audio-routing =
58 compatible = "gpio-keys";
64 wakeup-source;
70 powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
73 #address-cells = <1>;
74 #size-cells = <0>;
80 remote-endpoint = <&dpi_dvi_out>;
88 remote-endpoint = <&dvi_connector_in>;
95 compatible = "dvi-connector";
100 ddc-i2c-bus = <&i2c2>;
104 remote-endpoint = <&tfp410_out>;
110 compatible = "svideo-connector";
115 remote-endpoint = <&venc_out>;
122 clock-frequency = <2600000>;
129 compatible = "ti,twl4030-audio";
137 clock-frequency = <400000>;
148 vmmc-supply = <&vmmc1>;
149 vqmmc-supply = <&vsim>;
150 bus-width = <8>;
163 /delete-property/ti,no-reset-on-init;
164 /delete-property/ti,no-idle;
166 /delete-property/ti,timer-alwon;
172 ti,no-reset-on-init;
173 ti,no-idle;
180 ti,use-leds;
223 compatible = "ti,omap2-nand";
225 interrupt-parent = <&gpmc>;
228 nand-bus-width = <16>;
229 gpmc,device-width = <2>;
230 ti,nand-ecc-opt = "sw";
232 gpmc,sync-clk-ps = <0>;
233 gpmc,cs-on-ns = <0>;
234 gpmc,cs-rd-off-ns = <44>;
235 gpmc,cs-wr-off-ns = <44>;
236 gpmc,adv-on-ns = <6>;
237 gpmc,adv-rd-off-ns = <34>;
238 gpmc,adv-wr-off-ns = <44>;
239 gpmc,we-off-ns = <40>;
240 gpmc,oe-off-ns = <54>;
241 gpmc,access-ns = <64>;
242 gpmc,rd-cycle-ns = <82>;
243 gpmc,wr-cycle-ns = <82>;
244 gpmc,wr-access-ns = <40>;
245 gpmc,wr-data-mux-bus-ns = <0>;
247 #address-cells = <1>;
248 #size-cells = <1>;
250 x-loader@0 {
251 label = "X-Loader";
256 label = "U-Boot";
261 label = "U-Boot Env";
280 bank-width = <2>;
281 interrupt-parent = <&gpio1>;
283 davicom,no-eeprom;
285 gpmc,mux-add-data = <0>;
286 gpmc,device-width = <1>;
287 gpmc,wait-pin = <0>;
288 gpmc,cycle2cycle-samecsen;
289 gpmc,cycle2cycle-diffcsen;
291 gpmc,cs-on-ns = <6>;
292 gpmc,cs-rd-off-ns = <180>;
293 gpmc,cs-wr-off-ns = <180>;
294 gpmc,adv-on-ns = <0>;
295 gpmc,adv-rd-off-ns = <18>;
296 gpmc,adv-wr-off-ns = <48>;
297 gpmc,oe-on-ns = <54>;
298 gpmc,oe-off-ns = <168>;
299 gpmc,we-on-ns = <54>;
300 gpmc,we-off-ns = <168>;
301 gpmc,rd-cycle-ns = <186>;
302 gpmc,wr-cycle-ns = <186>;
303 gpmc,access-ns = <144>;
304 gpmc,page-burst-access-ns = <24>;
305 gpmc,bus-turnaround-ns = <90>;
306 gpmc,cycle2cycle-delay-ns = <90>;
307 gpmc,wait-monitoring-ns = <0>;
308 gpmc,clk-activation-ns = <0>;
309 gpmc,wr-data-mux-bus-ns = <0>;
310 gpmc,wr-access-ns = <0>;
315 dss_dpi_pins: dss-dpi-pins {
316 pinctrl-single,pins = <
351 regulator-name = "vdds_dsi";
353 regulator-min-microvolt = <1800000>;
354 regulator-max-microvolt = <1800000>;
360 pinctrl-names = "default";
361 pinctrl-0 = <&dss_dpi_pins>;
363 vdds_dsi-supply = <&vpll1>;
364 vdda_dac-supply = <&vdac>;
367 #address-cells = <1>;
368 #size-cells = <0>;
371 remote-endpoint = <&tfp410_in>;
372 data-lines = <24>;
384 vdda-supply = <&vdac>;
388 remote-endpoint = <&tv_connector_in>;