Lines Matching +full:rx +full:- +full:inactive
1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
6 #include "dra74-ipu-dsp-common.dtsi"
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/clock/ti-dra7-atl.h>
9 #include <dt-bindings/input/input.h>
13 stdout-path = &uart1;
17 compatible = "linux,extcon-usb-gpio";
18 id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
22 compatible = "linux,extcon-usb-gpio";
23 id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
27 compatible = "simple-audio-card";
28 simple-audio-card,name = "DRA7xx-EVM";
29 simple-audio-card,widgets =
34 simple-audio-card,routing =
44 simple-audio-card,format = "dsp_b";
45 simple-audio-card,bitclock-master = <&sound0_master>;
46 simple-audio-card,frame-master = <&sound0_master>;
47 simple-audio-card,bitclock-inversion;
49 sound0_master: simple-audio-card,cpu {
50 sound-dai = <&mcasp3>;
51 system-clock-frequency = <5644800>;
54 simple-audio-card,codec {
55 sound-dai = <&tlv320aic3106>;
61 compatible = "gpio-leds";
65 default-state = "off";
71 default-state = "off";
77 default-state = "off";
83 default-state = "off";
88 compatible = "gpio-keys";
89 #address-cells = <1>;
90 #size-cells = <0>;
109 clock-frequency = <400000>;
122 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
137 spi-max-frequency = <76800000>;
140 spi-max-frequency = <76800000>;
142 spi-tx-bus-width = <1>;
143 spi-rx-bus-width = <4>;
144 #address-cells = <1>;
145 #size-cells = <1>;
169 label = "QSPI.u-boot";
173 label = "QSPI.u-boot-spl-os";
177 label = "QSPI.u-boot-env";
181 label = "QSPI.u-boot-env.backup1";
189 label = "QSPI.file-system";
214 assigned-clocks = <&abe_dpll_sys_clk_mux>,
219 assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
220 assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
231 #sound-dai-cells = <0>;
233 assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
234 assigned-clock-parents = <&atl_clkin2_ck>;
238 op-mode = <0>; /* MCASP_IIS_MODE */
239 tdm-slots = <2>;
241 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
244 tx-num-evt = <32>;
245 rx-num-evt = <32>;
253 bus-width = <4>;
254 cap-power-off-card;
255 keep-power-in-suspend;
256 non-removable;
257 #address-cells = <1>;
258 #size-cells = <0>;
262 interrupt-parent = <&gpio5>;