Lines Matching +full:0 +full:x0810
13 reg = <0x80000000 0x40000000>; /* 1 GB */
36 ethphy0: ethernet-phy@0 {
37 reg = <0>;
46 ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
48 nand@0,0 {
50 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
52 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
60 gpmc,sync-clk-ps = <0>;
61 gpmc,cs-on-ns = <0>;
67 gpmc,we-on-ns = <0>;
69 gpmc,oe-on-ns = <0>;
74 gpmc,bus-turnaround-ns = <0>;
75 gpmc,cycle2cycle-delay-ns = <0>;
76 gpmc,clk-activation-ns = <0>;
78 gpmc,wr-data-mux-bus-ns = <0>;
79 partition@0 {
81 reg = <0 0x80000>;
85 reg = <0x80000 0x1c0000>;
89 reg = <0x240000 0x40000>;
93 reg = <0x280000 0x500000>;
97 reg = <0x780000 0xf880000>;
104 pinctrl-0 = <&sd1_pins>;
113 DM814X_IOPAD(0x0800, PIN_INPUT | 0x1) /* SD1_CLK */
114 DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1) /* SD1_CMD */
115 DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[0] */
116 DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[1] */
117 DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[2] */
118 DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1) /* SD1_DAT[3] */
119 DM814X_IOPAD(0x0924, PIN_OUTPUT | 0x40) /* SD1_POW */
120 DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP | 0x80) /* GP1[6] */
126 DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1) /* USB0_DRVVBUS */
131 /* USB0_ID pin state: SW10[1] = 0 cable detection, SW10[1] = 1 ID grounded */
134 pinctrl-0 = <&usb0_pins>;