Lines Matching +full:vddmipi +full:- +full:supply
1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
6 #include "am57xx-industrial-grade.dtsi"
16 stdout-path = &uart3;
19 vmain: fixedregulator-vmain {
20 compatible = "regulator-fixed";
21 regulator-name = "VMAIN";
22 regulator-min-microvolt = <5000000>;
23 regulator-max-microvolt = <5000000>;
24 regulator-always-on;
25 regulator-boot-on;
28 v3_3d: fixedregulator-v3_3d {
29 compatible = "regulator-fixed";
30 regulator-name = "V3_3D";
31 vin-supply = <&smps9_reg>;
32 regulator-min-microvolt = <3300000>;
33 regulator-max-microvolt = <3300000>;
34 regulator-always-on;
35 regulator-boot-on;
38 v1_2d: fixedregulator-v1_2d {
39 compatible = "regulator-fixed";
40 regulator-name = "V1_2D";
41 vin-supply = <&vmain>;
42 regulator-min-microvolt = <1200000>;
43 regulator-max-microvolt = <1200000>;
44 regulator-always-on;
45 regulator-boot-on;
48 vtt_fixed: fixedregulator-vtt {
50 compatible = "regulator-fixed";
51 regulator-name = "vtt_fixed";
52 vin-supply = <&v3_3d>;
53 regulator-min-microvolt = <3300000>;
54 regulator-max-microvolt = <3300000>;
55 regulator-always-on;
56 regulator-boot-on;
59 leds-iio {
61 compatible = "gpio-leds";
62 led-out0 {
65 default-state = "off";
68 led-out1 {
71 default-state = "off";
74 led-out2 {
77 default-state = "off";
80 led-out3 {
83 default-state = "off";
86 led-out4 {
89 default-state = "off";
92 led-out5 {
95 default-state = "off";
98 led-out6 {
101 default-state = "off";
104 led-out7 {
107 default-state = "off";
112 compatible = "hdmi-connector";
119 remote-endpoint = <&tpd12s015_out>;
132 #address-cells = <1>;
133 #size-cells = <0>;
139 remote-endpoint = <&hdmi_out>;
147 remote-endpoint = <&hdmi_connector_in>;
154 #clock-cells = <0>;
155 compatible = "fixed-clock";
156 clock-frequency = <20000000>;
161 dcan1_pins_default: dcan1-default-pins {
162 pinctrl-single,pins = <
168 dcan1_pins_sleep: dcan1-sleep-pins {
169 pinctrl-single,pins = <
178 clock-frequency = <400000>;
183 interrupts-extended = <&gpio6 16 IRQ_TYPE_LEVEL_HIGH
185 #interrupt-cells = <2>;
186 interrupt-controller;
187 ti,system-power-controller;
188 ti,palmas-override-powerhold;
191 compatible = "ti,tps659038-pmic";
193 smps12-in-supply = <&vmain>;
194 smps3-in-supply = <&vmain>;
195 smps45-in-supply = <&vmain>;
196 smps6-in-supply = <&vmain>;
197 smps7-in-supply = <&vmain>;
198 smps8-in-supply = <&vmain>;
199 smps9-in-supply = <&vmain>;
200 ldo1-in-supply = <&vmain>;
201 ldo2-in-supply = <&vmain>;
202 ldo3-in-supply = <&vmain>;
203 ldo4-in-supply = <&vmain>;
204 ldo9-in-supply = <&vmain>;
205 ldoln-in-supply = <&vmain>;
206 ldousb-in-supply = <&vmain>;
207 ldortc-in-supply = <&vmain>;
212 regulator-name = "smps12";
213 regulator-min-microvolt = <850000>;
214 regulator-max-microvolt = <1250000>;
215 regulator-always-on;
216 regulator-boot-on;
221 regulator-name = "smps3";
222 regulator-min-microvolt = <1350000>;
223 regulator-max-microvolt = <1350000>;
224 regulator-always-on;
225 regulator-boot-on;
231 regulator-name = "smps45";
232 regulator-min-microvolt = <850000>;
233 regulator-max-microvolt = <1250000>;
234 regulator-always-on;
235 regulator-boot-on;
240 regulator-name = "smps6";
241 regulator-min-microvolt = <850000>;
242 regulator-max-microvolt = <1250000>;
243 regulator-always-on;
244 regulator-boot-on;
249 regulator-name = "smps7";
250 regulator-min-microvolt = <850000>;
251 regulator-max-microvolt = <1150000>;
252 regulator-always-on;
253 regulator-boot-on;
257 /* 5728 - VDD_IVAHD */
258 /* 5718 - N.C. test point */
259 regulator-name = "smps8";
264 regulator-name = "smps9";
265 regulator-min-microvolt = <3300000>;
266 regulator-max-microvolt = <3300000>;
267 regulator-always-on;
268 regulator-boot-on;
272 /* VDDSHV8 - VSDMMC */
273 /* NOTE: on rev 1.3a, data supply */
274 regulator-name = "ldo1";
275 regulator-min-microvolt = <1800000>;
276 regulator-max-microvolt = <3300000>;
277 regulator-boot-on;
278 regulator-always-on;
283 regulator-name = "ldo2";
284 regulator-min-microvolt = <1800000>;
285 regulator-max-microvolt = <1800000>;
286 regulator-always-on;
287 regulator-boot-on;
292 regulator-name = "ldo3";
293 regulator-min-microvolt = <1800000>;
294 regulator-max-microvolt = <1800000>;
295 regulator-always-on;
296 regulator-boot-on;
301 regulator-name = "ldo4";
302 regulator-min-microvolt = <1800000>;
303 regulator-max-microvolt = <1800000>;
304 regulator-always-on;
305 regulator-boot-on;
308 /* LDO5-8 unused */
312 regulator-name = "ldo9";
313 regulator-min-microvolt = <840000>;
314 regulator-max-microvolt = <1160000>;
315 regulator-always-on;
316 regulator-boot-on;
321 regulator-name = "ldoln";
322 regulator-min-microvolt = <1800000>;
323 regulator-max-microvolt = <1800000>;
324 regulator-always-on;
325 regulator-boot-on;
330 regulator-name = "ldousb";
331 regulator-min-microvolt = <3300000>;
332 regulator-max-microvolt = <3300000>;
333 regulator-always-on;
334 regulator-boot-on;
339 regulator-name = "ldortc";
340 regulator-min-microvolt = <1800000>;
341 regulator-max-microvolt = <1800000>;
342 regulator-always-on;
343 regulator-boot-on;
348 regulator-name = "regen1";
349 regulator-boot-on;
350 regulator-always-on;
355 regulator-name = "regen2";
356 regulator-boot-on;
357 regulator-always-on;
363 compatible = "ti,palmas-rtc";
364 interrupt-parent = <&tps659038>;
366 wakeup-source;
370 compatible = "ti,palmas-pwrbutton";
371 interrupt-parent = <&tps659038>;
373 wakeup-source;
374 ti,palmas-long-press-seconds = <12>;
378 compatible = "ti,palmas-gpio";
379 gpio-controller;
380 #gpio-cells = <2>;
384 compatible = "ti,palmas-usb-vid";
385 ti,enable-vbus-detection;
386 ti,enable-id-detection;
394 gpio-controller;
395 #gpio-cells = <2>;
404 clock-names = "refclk";
406 vddc-supply = <&v1_2d>;
407 vddmipi-supply = <&v1_2d>;
408 vddio-supply = <&v3_3d>;
411 #address-cells = <1>;
412 #size-cells = <0>;
417 remote-endpoint = <&dpi_out>;
418 data-lines = <24>;
427 ti,pindir-d0-out-d1-in;
430 compatible = "pisosr-gpio";
431 gpio-controller;
432 #gpio-cells = <2>;
435 spi-max-frequency = <1000000>;
436 spi-cpol;
442 interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
448 ext-clk-src;
456 phy-handle = <ðphy0>;
457 phy-mode = "rgmii-rxid";
458 ti,dual-emac-pvid = <1>;
462 phy-handle = <ðphy1>;
463 phy-mode = "rgmii-rxid";
464 ti,dual-emac-pvid = <2>;
468 ethphy0: ethernet-phy@0 {
472 ethphy1: ethernet-phy@1 {
478 phy-supply = <&ldousb_reg>;
482 phy-supply = <&ldousb_reg>;
500 vmmc-supply = <&v3_3d>;
501 vqmmc-supply = <&ldo1_reg>;
502 bus-width = <4>;
503 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
504 no-1-8-v;
509 vmmc-supply = <&v3_3d>;
510 vqmmc-supply = <&v3_3d>;
511 bus-width = <8>;
512 non-removable;
513 max-frequency = <96000000>;
514 no-1-8-v;
519 pinctrl-names = "default", "sleep", "active";
520 pinctrl-0 = <&dcan1_pins_sleep>;
521 pinctrl-1 = <&dcan1_pins_sleep>;
522 pinctrl-2 = <&dcan1_pins_default>;
528 spi-max-frequency = <76800000>;
530 compatible = "s25fl256s1", "jedec,spi-nor";
531 spi-max-frequency = <76800000>;
533 spi-tx-bus-width = <1>;
534 spi-rx-bus-width = <4>;
535 #address-cells = <1>;
536 #size-cells = <1>;
548 label = "QSPI.u-boot";
552 label = "QSPI.u-boot-spl-os";
556 label = "QSPI.u-boot-env";
560 label = "QSPI.u-boot-env.backup1";
568 label = "QSPI.file-system";
575 vdd-supply = <&smps12_reg>;
581 vdda-supply = <&ldo4_reg>;
585 remote-endpoint = <&tpd12s015_in>;
593 vdda_video-supply = <&ldoln_reg>;
596 #address-cells = <1>;
597 #size-cells = <0>;
603 remote-endpoint = <&rgb_in>;
604 data-lines = <24>;