Lines Matching +full:dsp +full:- +full:gpio4

1 // SPDX-License-Identifier: GPL-2.0-only
3  * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include "dra7-mmc-iodelay.dtsi"
11 #include "dra72x-mmc-iodelay.dtsi"
12 #include "am57xx-idk-common.dtsi"
13 #include "dra7-ipu-dsp-common.dtsi"
17 	compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";
24 	reserved-memory {
25 		#address-cells = <2>;
26 		#size-cells = <2>;
29 		ipu2_memory_region: ipu2-memory@95800000 {
30 			compatible = "shared-dma-pool";
36 		dsp1_memory_region: dsp1-memory@99000000 {
37 			compatible = "shared-dma-pool";
43 		ipu1_memory_region: ipu1-memory@9d000000 {
44 			compatible = "shared-dma-pool";
52 		compatible = "gpio-leds";
53 		cpu0-led {
56 			default-state = "off";
57 			linux,default-trigger = "cpu0";
60 		usr0-led {
63 			default-state = "off";
66 		heartbeat-led {
69 			default-state = "off";
70 			linux,default-trigger = "heartbeat";
73 		usr1-led {
76 			default-state = "off";
79 		usr2-led {
82 			default-state = "off";
85 		mmc0-led {
88 			default-state = "off";
89 			linux,default-trigger = "mmc0";
93 	idk-leds {
95 		compatible = "gpio-leds";
96 		red0-led {
99 			default-state = "off";
102 		green0-led {
104 			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
105 			default-state = "off";
108 		blue0-led {
111 			default-state = "off";
114 		red1-led {
117 			default-state = "off";
120 		green1-led {
123 			default-state = "off";
126 		blue1-led {
129 			default-state = "off";
132 		red2-led {
135 			default-state = "off";
138 		green2-led {
141 			default-state = "off";
144 		blue2-led {
147 			default-state = "off";
150 		red3-led {
153 			default-state = "off";
156 		green3-led {
159 			default-state = "off";
162 		blue3-led {
165 			default-state = "off";
171 	id-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
172 	vbus-gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
176 	load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
181 	memory-region = <&ipu2_memory_region>;
186 	memory-region = <&ipu1_memory_region>;
191 	memory-region = <&dsp1_memory_region>;
200 	pinctrl-names = "default", "hs";
201 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
202 	pinctrl-1 = <&mmc1_pins_hs>;
206 	pinctrl-names = "default", "hs", "ddr_3_3v";
207 	pinctrl-0 = <&mmc2_pins_default>;
208 	pinctrl-1 = <&mmc2_pins_hs>;
209 	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;