Lines Matching +full:default +full:- +full:mode
1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
8 /dts-v1/;
11 #include <dt-bindings/pinctrl/am43xx.h>
12 #include <dt-bindings/pwm/pwm.h>
13 #include <dt-bindings/gpio/gpio.h>
17 compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
24 stdout-path = &uart0;
27 evm_v3_3d: fixedregulator-v3_3d {
28 compatible = "regulator-fixed";
29 regulator-name = "evm_v3_3d";
30 regulator-min-microvolt = <3300000>;
31 regulator-max-microvolt = <3300000>;
32 enable-active-high;
35 vtt_fixed: fixedregulator-vtt {
36 compatible = "regulator-fixed";
37 regulator-name = "vtt_fixed";
38 regulator-min-microvolt = <1500000>;
39 regulator-max-microvolt = <1500000>;
40 regulator-always-on;
41 regulator-boot-on;
42 enable-active-high;
46 vmmcwl_fixed: fixedregulator-mmcwl {
47 compatible = "regulator-fixed";
48 regulator-name = "vmmcwl_fixed";
49 regulator-min-microvolt = <1800000>;
50 regulator-max-microvolt = <1800000>;
52 enable-active-high;
56 compatible = "pwm-backlight";
58 brightness-levels = <0 51 53 56 62 75 101 152 255>;
59 default-brightness-level = <8>;
63 compatible = "gpio-matrix-keypad";
64 debounce-delay-ms = <5>;
65 col-scan-delay-us = <2>;
67 pinctrl-names = "default", "sleep";
68 pinctrl-0 = <&matrix_keypad_default>;
69 pinctrl-1 = <&matrix_keypad_sleep>;
71 wakeup-source;
73 row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */
77 col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
89 compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
96 remote-endpoint = <&dpi_out>;
103 #clock-cells = <0>;
104 compatible = "fixed-clock";
105 clock-frequency = <12000000>;
110 #clock-cells = <0>;
111 compatible = "fixed-clock";
112 clock-frequency = <32768>;
116 compatible = "simple-audio-card";
117 simple-audio-card,name = "AM437x-GP-EVM";
118 simple-audio-card,widgets =
121 simple-audio-card,routing =
126 simple-audio-card,format = "dsp_b";
127 simple-audio-card,bitclock-master = <&sound0_master>;
128 simple-audio-card,frame-master = <&sound0_master>;
129 simple-audio-card,bitclock-inversion;
131 simple-audio-card,cpu {
132 sound-dai = <&mcasp1>;
133 system-clock-frequency = <12000000>;
136 sound0_master: simple-audio-card,codec {
137 sound-dai = <&tlv320aic3106>;
138 system-clock-frequency = <12000000>;
143 compatible = "gpio-beeper";
144 pinctrl-names = "default";
145 pinctrl-0 = <&beeper_pins_default>;
146 pinctrl-1 = <&beeper_pins_sleep>;
152 pinctrl-names = "default", "sleep";
153 pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins &debugss_pins>;
154 pinctrl-1 = <&wlan_pins_sleep>;
156 ddr3_vtt_toggle_default: ddr-vtt-toggle-default-pins {
157 pinctrl-single,pins = <
162 i2c0_pins: i2c0-pins {
163 pinctrl-single,pins = <
169 i2c1_pins: i2c1-pins {
170 pinctrl-single,pins = <
176 mmc1_pins: mmc1-pins {
177 pinctrl-single,pins = <
182 ecap0_pins: backlight-pins {
183 pinctrl-single,pins = <
188 pixcir_ts_pins: pixcir-ts-pins {
189 pinctrl-single,pins = <
194 cpsw_default: cpsw-default-pins {
195 pinctrl-single,pins = <
212 cpsw_sleep: cpsw-sleep-pins {
213 pinctrl-single,pins = <
230 davinci_mdio_default: davinci-mdio-default-pins {
231 pinctrl-single,pins = <
238 davinci_mdio_sleep: davinci-mdio-sleep-pins {
239 pinctrl-single,pins = <
246 nand_flash_x8: nand-flash-x8-pins {
247 pinctrl-single,pins = <
266 dss_pins: dss-pins {
267 pinctrl-single,pins = <
268 AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
275 AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
300 display_mux_pins: display-mux-pins {
301 pinctrl-single,pins = <
307 dcan0_default: dcan0-default-pins {
308 pinctrl-single,pins = <
314 dcan0_sleep: dcan0-sleep-pins {
315 pinctrl-single,pins = <
321 dcan1_default: dcan1-default-pins {
322 pinctrl-single,pins = <
328 dcan1_sleep: dcan1-sleep-pins {
329 pinctrl-single,pins = <
335 vpfe0_pins_default: vpfe0-default-pins {
336 pinctrl-single,pins = <
337 AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
338 AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
339 AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
340 AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
341 AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
342 AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
343 AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
344 AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
345 AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
346 AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
347 AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
348 AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
349 AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
353 vpfe0_pins_sleep: vpfe0-sleep-pins {
354 pinctrl-single,pins = <
355 AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/
356 AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/
357 AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/
358 AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/
359 AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/
360 AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/
361 AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/
362 AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/
363 AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/
364 AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/
365 AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/
366 AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/
367 AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/
371 vpfe1_pins_default: vpfe1-default-pins {
372 pinctrl-single,pins = <
373 AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/
374 AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/
375 AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/
376 AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/
377 AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/
378 AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/
379 AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/
380 AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/
381 AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/
382 AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/
383 AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/
384 AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/
385 AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/
389 vpfe1_pins_sleep: vpfe1-sleep-pins {
390 pinctrl-single,pins = <
391 AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/
392 AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/
393 AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/
394 AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/
395 AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/
396 AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/
397 AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/
398 AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/
399 AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/
400 AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/
401 AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/
402 AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/
403 AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
407 mmc3_pins_default: mmc3-default-pins {
408 pinctrl-single,pins = <
418 mmc3_pins_sleep: mmc3-sleep-pins {
419 pinctrl-single,pins = <
429 wlan_pins_default: wlan-default-pins {
430 pinctrl-single,pins = <
437 wlan_pins_sleep: wlan-sleep-pins {
438 pinctrl-single,pins = <
445 uart3_pins: uart3-pins {
446 pinctrl-single,pins = <
454 mcasp1_pins: mcasp1-pins {
455 pinctrl-single,pins = <
463 mcasp1_sleep_pins: mcasp1-sleep-pins {
464 pinctrl-single,pins = <
472 gpio0_pins: gpio0-pins {
473 pinctrl-single,pins = <
478 emmc_pins_default: emmc-default-pins {
479 pinctrl-single,pins = <
493 emmc_pins_sleep: emmc-sleep-pins {
494 pinctrl-single,pins = <
508 beeper_pins_default: beeper-default-pins {
509 pinctrl-single,pins = <
514 beeper_pins_sleep: beeper-sleep-pins {
515 pinctrl-single,pins = <
520 unused_pins: unused-pins {
521 pinctrl-single,pins = <
569 debugss_pins: debugss-pins {
570 pinctrl-single,pins = <
581 uart0_pins_default: uart0-default-pins {
582 pinctrl-single,pins = <
590 uart0_pins_sleep: uart0-sleep-pins {
591 pinctrl-single,pins = <
599 matrix_keypad_default: matrix-keypad-default-pins {
600 pinctrl-single,pins = <
608 matrix_keypad_sleep: matrix-keypad-sleep-pins {
609 pinctrl-single,pins = <
620 pinctrl-names = "default", "sleep";
621 pinctrl-0 = <&uart0_pins_default>;
622 pinctrl-1 = <&uart0_pins_sleep>;
627 pinctrl-names = "default";
628 pinctrl-0 = <&i2c0_pins>;
629 clock-frequency = <100000>;
635 interrupt-controller;
636 #interrupt-cells = <2>;
638 dcdc1: regulator-dcdc1 {
639 regulator-name = "vdd_core";
640 regulator-min-microvolt = <912000>;
641 regulator-max-microvolt = <1144000>;
642 regulator-boot-on;
643 regulator-always-on;
646 dcdc2: regulator-dcdc2 {
647 regulator-name = "vdd_mpu";
648 regulator-min-microvolt = <912000>;
649 regulator-max-microvolt = <1378000>;
650 regulator-boot-on;
651 regulator-always-on;
654 dcdc3: regulator-dcdc3 {
655 regulator-name = "vdcdc3";
656 regulator-boot-on;
657 regulator-always-on;
658 regulator-state-mem {
659 regulator-on-in-suspend;
661 regulator-state-disk {
662 regulator-off-in-suspend;
666 dcdc5: regulator-dcdc5 {
667 regulator-name = "v1_0bat";
668 regulator-min-microvolt = <1000000>;
669 regulator-max-microvolt = <1000000>;
670 regulator-boot-on;
671 regulator-always-on;
672 regulator-state-mem {
673 regulator-on-in-suspend;
677 dcdc6: regulator-dcdc6 {
678 regulator-name = "v1_8bat";
679 regulator-min-microvolt = <1800000>;
680 regulator-max-microvolt = <1800000>;
681 regulator-boot-on;
682 regulator-always-on;
683 regulator-state-mem {
684 regulator-on-in-suspend;
688 ldo1: regulator-ldo1 {
689 regulator-min-microvolt = <1800000>;
690 regulator-max-microvolt = <1800000>;
691 regulator-boot-on;
692 regulator-always-on;
701 clock-names = "xvclk";
705 remote-endpoint = <&vpfe1_ep>;
706 link-frequencies = /bits/ 64 <70000000>;
714 pinctrl-names = "default";
715 pinctrl-0 = <&i2c1_pins>;
718 pinctrl-names = "default";
719 pinctrl-0 = <&pixcir_ts_pins>;
722 attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
728 interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
730 interrupt-names = "tsc", "wakeup";
732 touchscreen-size-x = <1024>;
733 touchscreen-size-y = <600>;
734 wakeup-source;
742 clock-names = "xvclk";
746 remote-endpoint = <&vpfe0_ep>;
747 link-frequencies = /bits/ 64 <70000000>;
753 #sound-dai-cells = <0>;
759 IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */
760 AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
761 DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
762 DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */
774 ti,adc-channels = <0 1 2 3 4 5 6 7>;
782 ti,adc-channels = <0 1 2 3 4 5 6 7>;
788 pinctrl-names = "default";
789 pinctrl-0 = <&ecap0_pins>;
793 pinctrl-names = "default";
794 pinctrl-0 = <&gpio0_pins>;
797 sel-emmc-nand-hog {
798 gpio-hog;
807 output-low;
808 line-name = "SelEMMCorNAND";
825 ti,no-reset-on-init;
829 pinctrl-names = "default";
830 pinctrl-0 = <&display_mux_pins>;
833 sel-lcd-hdmi-hog {
839 gpio-hog;
841 output-high;
842 line-name = "SelLCDorHDMI";
848 vmmc-supply = <&evm_v3_3d>;
849 bus-width = <4>;
850 pinctrl-names = "default";
851 pinctrl-0 = <&mmc1_pins>;
852 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
859 * SelEMMCorNAND to output-high
862 vmmc-supply = <&evm_v3_3d>;
863 bus-width = <8>;
864 pinctrl-names = "default", "sleep";
865 pinctrl-0 = <&emmc_pins_default>;
866 pinctrl-1 = <&emmc_pins_sleep>;
867 non-removable;
873 xbar-event-map element */
876 dma-names = "tx", "rx";
877 vmmc-supply = <&vmmcwl_fixed>;
878 bus-width = <4>;
879 pinctrl-names = "default", "sleep";
880 pinctrl-0 = <&mmc3_pins_default>;
881 pinctrl-1 = <&mmc3_pins_sleep>;
882 cap-power-off-card;
883 keep-power-in-suspend;
884 non-removable;
886 #address-cells = <1>;
887 #size-cells = <0>;
891 interrupt-parent = <&gpio1>;
898 pinctrl-names = "default";
899 pinctrl-0 = <&uart3_pins>;
921 pinctrl-names = "default", "sleep";
922 pinctrl-0 = <&cpsw_default>;
923 pinctrl-1 = <&cpsw_sleep>;
928 pinctrl-names = "default", "sleep";
929 pinctrl-0 = <&davinci_mdio_default>;
930 pinctrl-1 = <&davinci_mdio_sleep>;
932 ethphy0: ethernet-phy@0 {
938 phy-handle = <ðphy0>;
939 phy-mode = "rgmii-rxid";
940 ti,dual-emac-pvid = <1>;
954 * SelEMMCorNAND to output-low
957 pinctrl-names = "default";
958 pinctrl-0 = <&nand_flash_x8>;
961 compatible = "ti,omap2-nand";
963 interrupt-parent = <&gpmc>;
966 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
967 ti,nand-xfer-type = "prefetch-dma";
968 ti,nand-ecc-opt = "bch16";
969 ti,elm-id = <&elm>;
970 nand-bus-width = <8>;
971 gpmc,device-width = <1>;
972 gpmc,sync-clk-ps = <0>;
973 gpmc,cs-on-ns = <0>;
974 gpmc,cs-rd-off-ns = <40>;
975 gpmc,cs-wr-off-ns = <40>;
976 gpmc,adv-on-ns = <0>;
977 gpmc,adv-rd-off-ns = <25>;
978 gpmc,adv-wr-off-ns = <25>;
979 gpmc,we-on-ns = <0>;
980 gpmc,we-off-ns = <20>;
981 gpmc,oe-on-ns = <3>;
982 gpmc,oe-off-ns = <30>;
983 gpmc,access-ns = <30>;
984 gpmc,rd-cycle-ns = <40>;
985 gpmc,wr-cycle-ns = <40>;
986 gpmc,bus-turnaround-ns = <0>;
987 gpmc,cycle2cycle-delay-ns = <0>;
988 gpmc,clk-activation-ns = <0>;
989 gpmc,wr-access-ns = <40>;
990 gpmc,wr-data-mux-bus-ns = <0>;
992 /* All SPL-* partitions are sized to minimal length
994 * NAND flash this is equal to size of erase-block */
995 #address-cells = <1>;
996 #size-cells = <1>;
1014 label = "NAND.u-boot-spl-os";
1018 label = "NAND.u-boot";
1022 label = "NAND.u-boot-env";
1026 label = "NAND.u-boot-env.backup1";
1034 label = "NAND.file-system";
1043 pinctrl-names = "default";
1044 pinctrl-0 = <&dss_pins>;
1048 remote-endpoint = <&lcd_in>;
1049 data-lines = <24>;
1055 pinctrl-names = "default", "sleep";
1056 pinctrl-0 = <&dcan0_default>;
1057 pinctrl-1 = <&dcan0_sleep>;
1062 pinctrl-names = "default", "sleep";
1063 pinctrl-0 = <&dcan1_default>;
1064 pinctrl-1 = <&dcan1_sleep>;
1070 pinctrl-names = "default", "sleep";
1071 pinctrl-0 = <&vpfe0_pins_default>;
1072 pinctrl-1 = <&vpfe0_pins_sleep>;
1076 remote-endpoint = <&ov2659_1>;
1077 ti,am437x-vpfe-interface = <0>;
1078 bus-width = <8>;
1079 hsync-active = <0>;
1080 vsync-active = <0>;
1087 pinctrl-names = "default", "sleep";
1088 pinctrl-0 = <&vpfe1_pins_default>;
1089 pinctrl-1 = <&vpfe1_pins_sleep>;
1093 remote-endpoint = <&ov2659_0>;
1094 ti,am437x-vpfe-interface = <0>;
1095 bus-width = <8>;
1096 hsync-active = <0>;
1097 vsync-active = <0>;
1103 #sound-dai-cells = <0>;
1104 pinctrl-names = "default", "sleep";
1105 pinctrl-0 = <&mcasp1_pins>;
1106 pinctrl-1 = <&mcasp1_sleep_pins>;
1110 op-mode = <0>; /* MCASP_IIS_MODE */
1111 tdm-slots = <2>;
1113 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1116 tx-num-evt = <32>;
1117 rx-num-evt = <32>;
1122 clock-names = "ext-clk", "int-clk";
1127 cpu0-supply = <&dcdc2>;
1131 ti,set-io-isolation;
1132 firmware-name = "am43x-evm-scale-data.bin";