Lines Matching +full:vfront +full:- +full:porch
1 // SPDX-License-Identifier: GPL-2.0-only
3 * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335
5 * Copyright (C) 2014 - 2015 CompuLab Ltd. - https://www.compulab.co.il/
8 #include "am335x-cm-t335.dts"
11 model = "CompuLab CM-T335 on SB-T335";
12 compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx";
18 pinctrl-names = "default", "sleep";
19 pinctrl-0 = <&lcd_pins_default>;
20 pinctrl-1 = <&lcd_pins_sleep>;
22 panel-info {
23 ac-bias = <255>;
24 ac-bias-intrpt = <0>;
25 dma-burst-sz = <16>;
28 sync-edge = <0>;
29 sync-ctrl = <1>;
30 raster-order = <0>;
31 fifo-th = <0>;
33 display-timings {
34 /* Timing selection performed by U-Boot */
36 clock-frequency = <30000000>;
39 hfront-porch = <39>;
40 hback-porch = <39>;
41 hsync-len = <47>;
42 vback-porch = <29>;
43 vfront-porch = <13>;
44 vsync-len = <2>;
45 hsync-active = <1>;
46 vsync-active = <1>;
49 clock-frequency = <65000000>;
51 hfront-porch = <24>;
52 hback-porch = <160>;
53 hsync-len = <136>;
55 vfront-porch = <3>;
56 vback-porch = <29>;
57 vsync-len = <6>;
58 hsync-active = <0>;
59 vsync-active = <0>;
67 lcd_pins_default: lcd-default-pins {
68 pinctrl-single,pins = <
108 lcd_pins_sleep: lcd-sleep-pins {
109 pinctrl-single,pins = <
154 pinctrl-names = "default";
155 gpio-controller;
156 #gpio-cells = <2>;
158 dvi-ena-hog {
159 gpio-hog;
161 output-high;
162 line-name = "dvi-enable";
164 lcd-ena-hog {
165 gpio-hog;
167 output-high;
168 line-name = "lcd-enable";