Lines Matching +full:regulator +full:- +full:v6
1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
8 #include "am335x-osd335x-common.dtsi"
9 #include <dt-bindings/interrupt-controller/irq.h>
13 compatible = "ti,am335x-bone-blue", "ti,am33xx";
16 stdout-path = &uart0;
20 pinctrl-names = "default";
21 pinctrl-0 = <&user_leds_s0>;
23 compatible = "gpio-leds";
28 linux,default-trigger = "heartbeat";
29 default-state = "off";
35 linux,default-trigger = "mmc0";
36 default-state = "off";
42 linux,default-trigger = "cpu0";
43 default-state = "off";
49 linux,default-trigger = "mmc1";
50 default-state = "off";
56 default-state = "off";
57 linux,default-trigger = "phy0assoc";
63 default-state = "off";
69 default-state = "off";
75 default-state = "off";
81 default-state = "off";
87 default-state = "off";
93 default-state = "off";
98 compatible = "regulator-fixed";
99 regulator-name = "vmmcsd_fixed";
100 regulator-min-microvolt = <3300000>;
101 regulator-max-microvolt = <3300000>;
105 compatible = "regulator-fixed";
106 regulator-name = "wlan-en-regulator";
107 regulator-min-microvolt = <1800000>;
108 regulator-max-microvolt = <1800000>;
109 startup-delay-us = <70000>;
113 enable-active-high;
118 user_leds_s0: user-leds-s0-pins {
119 pinctrl-single,pins = <
120 …AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
121 …AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
122 …AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
123 …AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
124 …335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */
125 …AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P…
126 …AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.…
127 …AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, …
128 …AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32,…
129 …AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, B…
130 …AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, …
135 i2c2_pins: i2c2-pins {
136 pinctrl-single,pins = <
143 uart0_pins: uart0-pins {
144 pinctrl-single,pins = <
151 uart1_pins: uart1-pins {
152 pinctrl-single,pins = <
159 uart2_pins: uart2-pins {
160 pinctrl-single,pins = <
167 uart4_pins: uart4-pins {
168 pinctrl-single,pins = <
174 uart5_pins: uart5-pins {
175 pinctrl-single,pins = <
181 mmc1_pins: mmc1-pins {
182 pinctrl-single,pins = <
187 mmc2_pins: mmc2-pins {
188 pinctrl-single,pins = <
202 mmc3_pins: mmc3-pins {
203 pinctrl-single,pins = <
213 bt_pins: bt-pins {
214 pinctrl-single,pins = <
215 …ADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* (K17) gmii1_txd0.gpio0[28] - BT_EN */
219 uart3_pins: uart3-pins {
220 pinctrl-single,pins = <
228 wl18xx_pins: wl18xx-pins {
229 pinctrl-single,pins = <
230 …NF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] - WL_EN */
231 …CONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */
232 …AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7) /* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */
237 dcan1_pins: dcan1-pins {
238 pinctrl-single,pins = <
246 eqep0_pins: eqep0-pins {
247 pinctrl-single,pins = <
254 eqep1_pins: eqep1-pins {
255 pinctrl-single,pins = <
262 eqep2_pins: eqep2-pins {
263 pinctrl-single,pins = <
271 pinctrl-names = "default";
272 pinctrl-0 = <&uart0_pins>;
278 pinctrl-names = "default";
279 pinctrl-0 = <&uart1_pins>;
285 pinctrl-names = "default";
286 pinctrl-0 = <&uart2_pins>;
292 pinctrl-names = "default";
293 pinctrl-0 = <&uart4_pins>;
299 pinctrl-names = "default";
300 pinctrl-0 = <&uart5_pins>;
307 interrupts-extended = <&intc 18 &tps 0>;
308 interrupt-names = "mc", "vbus";
320 nvmem-layout {
321 compatible = "fixed-layout";
322 #address-cells = <1>;
323 #size-cells = <1>;
333 pinctrl-names = "default";
334 pinctrl-0 = <&i2c2_pins>;
337 clock-frequency = <400000>;
342 interrupt-parent = <&gpio3>;
344 i2c-gate {
345 #address-cells = <1>;
346 #size-cells = <0>;
348 compatible = "asahi-kasei,ak8975";
363 /delete-property/ ti,pmic-shutdown-controller;
367 interrupt-names = "USB", "AC";
374 vmmc-supply = <&vmmcsd_fixed>;
375 bus-width = <4>;
376 pinctrl-names = "default";
377 pinctrl-0 = <&mmc1_pins>;
378 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
383 vmmc-supply = <&vmmcsd_fixed>;
384 bus-width = <8>;
385 pinctrl-names = "default";
386 pinctrl-0 = <&mmc2_pins>;
392 dma-names = "tx", "rx";
394 vmmc-supply = <&wlan_en_reg>;
395 bus-width = <4>;
396 non-removable;
397 cap-power-off-card;
398 keep-power-in-suspend;
399 pinctrl-names = "default";
400 pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
402 #address-cells = <1>;
403 #size-cells = <0>;
407 interrupt-parent = <&gpio0>;
415 ti,adc-channels = <0 1 2 3 4 5 6 7>;
420 pinctrl-names = "default";
421 pinctrl-0 = <&uart3_pins &bt_pins>;
425 compatible = "ti,wl1835-st";
426 enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
431 system-power-controller;
433 clock-names = "ext-clk", "int-clk";
437 pinctrl-names = "default";
438 pinctrl-0 = <&dcan1_pins>;
443 gpio-line-names =
479 gpio-line-names =
509 "BATT_LED_3", /* V6 */
515 gpio-line-names =
551 gpio-line-names =
585 ls-buf-en-hog {
586 gpio-hog;
588 output-high;
597 pinctrl-names = "default";
598 pinctrl-0 = <&eqep0_pins>;
607 pinctrl-names = "default";
608 pinctrl-0 = <&eqep1_pins>;
617 pinctrl-names = "default";
618 pinctrl-0 = <&eqep2_pins>;