Lines Matching +full:vl +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
3 * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/mfd/st,stpmic1.h>
22 reserved-memory {
23 #address-cells = <1>;
24 #size-cells = <1>;
28 compatible = "shared-dma-pool";
30 no-map;
34 compatible = "shared-dma-pool";
36 no-map;
40 compatible = "shared-dma-pool";
42 no-map;
46 compatible = "shared-dma-pool";
48 no-map;
52 compatible = "shared-dma-pool";
54 no-map;
58 compatible = "shared-dma-pool";
60 no-map;
65 compatible = "gpio-leds";
66 led-blue {
69 linux,default-trigger = "heartbeat";
70 default-state = "off";
75 compatible = "audio-graph-card";
76 label = "STM32MP15-DK";
86 compatible = "regulator-fixed";
87 regulator-name = "vin";
88 regulator-min-microvolt = <5000000>;
89 regulator-max-microvolt = <5000000>;
90 regulator-always-on;
95 pinctrl-names = "default";
96 pinctrl-0 = <&adc12_usb_cc_pins_a>;
97 vdd-supply = <&vdd>;
98 vdda-supply = <&vdd>;
99 vref-supply = <&vrefbuf>;
104 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
111 st,min-sample-time-ns = <5000>;
115 st,min-sample-time-ns = <5000>;
120 /* USB Type-C CC1 & CC2 */
123 st,min-sample-time-ns = <5000>;
127 st,min-sample-time-ns = <5000>;
133 pinctrl-names = "default", "sleep";
134 pinctrl-0 = <&cec_pins_b>;
135 pinctrl-1 = <&cec_sleep_pins_b>;
149 pinctrl-0 = <ðernet0_rgmii_pins_a>;
150 pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>;
151 pinctrl-names = "default", "sleep";
152 phy-mode = "rgmii-id";
153 max-speed = <1000>;
154 phy-handle = <&phy0>;
157 #address-cells = <1>;
158 #size-cells = <0>;
159 compatible = "snps,dwmac-mdio";
160 phy0: ethernet-phy@0 {
171 pinctrl-names = "default", "sleep";
172 pinctrl-0 = <&i2c1_pins_a>;
173 pinctrl-1 = <&i2c1_sleep_pins_a>;
174 i2c-scl-rising-time-ns = <100>;
175 i2c-scl-falling-time-ns = <7>;
177 /delete-property/dmas;
178 /delete-property/dma-names;
180 hdmi-transmitter@39 {
183 iovcc-supply = <&v3v3_hdmi>;
184 cvcc12-supply = <&v1v2_hdmi>;
185 reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
187 interrupt-parent = <&gpiog>;
188 #sound-dai-cells = <0>;
192 #address-cells = <1>;
193 #size-cells = <0>;
198 remote-endpoint = <<dc_ep0_out>;
205 remote-endpoint = <&i2s2_endpoint>;
214 #sound-dai-cells = <0>;
215 VL-supply = <&v3v3>;
216 VD-supply = <&v1v8_audio>;
217 VA-supply = <&v1v8_audio>;
218 VAHP-supply = <&v1v8_audio>;
219 reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
221 clock-names = "MCLK";
225 #address-cells = <1>;
226 #size-cells = <0>;
230 remote-endpoint = <&sai2a_endpoint>;
231 frame-master = <&cs42l51_tx_endpoint>;
232 bitclock-master = <&cs42l51_tx_endpoint>;
237 remote-endpoint = <&sai2b_endpoint>;
238 frame-master = <&cs42l51_rx_endpoint>;
239 bitclock-master = <&cs42l51_rx_endpoint>;
246 pinctrl-names = "default", "sleep";
247 pinctrl-0 = <&i2c4_pins_a>;
248 pinctrl-1 = <&i2c4_sleep_pins_a>;
249 i2c-scl-rising-time-ns = <185>;
250 i2c-scl-falling-time-ns = <20>;
251 clock-frequency = <400000>;
254 /delete-property/dmas;
255 /delete-property/dma-names;
261 interrupt-parent = <&gpioi>;
262 pinctrl-names = "default";
263 pinctrl-0 = <&stusb1600_pins_a>;
265 vdd-supply = <&vin>;
268 compatible = "usb-c-connector";
269 label = "USB-C";
270 power-role = "dual";
271 typec-power-opmode = "default";
275 remote-endpoint = <&usbotg_hs_ep>;
284 interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
285 interrupt-controller;
286 #interrupt-cells = <2>;
290 compatible = "st,stpmic1-regulators";
291 buck1-supply = <&vin>;
292 buck2-supply = <&vin>;
293 buck3-supply = <&vin>;
294 buck4-supply = <&vin>;
295 ldo1-supply = <&v3v3>;
296 ldo2-supply = <&vin>;
297 ldo3-supply = <&vdd_ddr>;
298 ldo4-supply = <&vin>;
299 ldo5-supply = <&vin>;
300 ldo6-supply = <&v3v3>;
301 vref_ddr-supply = <&vin>;
302 boost-supply = <&vin>;
303 pwr_sw1-supply = <&bst_out>;
304 pwr_sw2-supply = <&bst_out>;
307 regulator-name = "vddcore";
308 regulator-min-microvolt = <1200000>;
309 regulator-max-microvolt = <1350000>;
310 regulator-always-on;
311 regulator-initial-mode = <0>;
312 regulator-over-current-protection;
316 regulator-name = "vdd_ddr";
317 regulator-min-microvolt = <1350000>;
318 regulator-max-microvolt = <1350000>;
319 regulator-always-on;
320 regulator-initial-mode = <0>;
321 regulator-over-current-protection;
325 regulator-name = "vdd";
326 regulator-min-microvolt = <3300000>;
327 regulator-max-microvolt = <3300000>;
328 regulator-always-on;
329 st,mask-reset;
330 regulator-initial-mode = <0>;
331 regulator-over-current-protection;
335 regulator-name = "v3v3";
336 regulator-min-microvolt = <3300000>;
337 regulator-max-microvolt = <3300000>;
338 regulator-always-on;
339 regulator-over-current-protection;
340 regulator-initial-mode = <0>;
344 regulator-name = "v1v8_audio";
345 regulator-min-microvolt = <1800000>;
346 regulator-max-microvolt = <1800000>;
347 regulator-always-on;
352 regulator-name = "v3v3_hdmi";
353 regulator-min-microvolt = <3300000>;
354 regulator-max-microvolt = <3300000>;
355 regulator-always-on;
360 regulator-name = "vtt_ddr";
361 regulator-min-microvolt = <500000>;
362 regulator-max-microvolt = <750000>;
363 regulator-always-on;
364 regulator-over-current-protection;
368 regulator-name = "vdd_usb";
373 regulator-name = "vdda";
374 regulator-min-microvolt = <2900000>;
375 regulator-max-microvolt = <2900000>;
377 regulator-boot-on;
381 regulator-name = "v1v2_hdmi";
382 regulator-min-microvolt = <1200000>;
383 regulator-max-microvolt = <1200000>;
384 regulator-always-on;
389 regulator-name = "vref_ddr";
390 regulator-always-on;
394 regulator-name = "bst_out";
399 regulator-name = "vbus_otg";
404 regulator-name = "vbus_sw";
406 regulator-active-discharge = <1>;
411 compatible = "st,stpmic1-onkey";
413 interrupt-names = "onkey-falling", "onkey-rising";
414 power-off-time-sec = <10>;
419 compatible = "st,stpmic1-wdt";
426 pinctrl-names = "default", "sleep";
427 pinctrl-0 = <&i2c5_pins_a>;
428 pinctrl-1 = <&i2c5_sleep_pins_a>;
429 i2c-scl-rising-time-ns = <185>;
430 i2c-scl-falling-time-ns = <20>;
431 clock-frequency = <400000>;
433 /delete-property/dmas;
434 /delete-property/dma-names;
440 clock-names = "pclk", "i2sclk", "x8k", "x11k";
441 pinctrl-names = "default", "sleep";
442 pinctrl-0 = <&i2s2_pins_a>;
443 pinctrl-1 = <&i2s2_sleep_pins_a>;
448 remote-endpoint = <&sii9022_tx_endpoint>;
449 dai-format = "i2s";
450 mclk-fs = <256>;
460 timeout-sec = <32>;
465 pinctrl-names = "default", "sleep";
466 pinctrl-0 = <<dc_pins_a>;
467 pinctrl-1 = <<dc_sleep_pins_a>;
472 remote-endpoint = <&sii9022_in>;
478 memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
481 mbox-names = "vq0", "vq1", "shutdown", "detach";
482 interrupt-parent = <&exti>;
488 vdd-supply = <&vdd>;
489 vdd_3v3_usbfs-supply = <&vdd_usb>;
502 clock-names = "pclk", "x8k", "x11k";
503 pinctrl-names = "default", "sleep";
504 pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
505 pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
508 sai2a: audio-controller@4400b004 {
509 #clock-cells = <0>;
510 dma-names = "tx";
515 remote-endpoint = <&cs42l51_tx_endpoint>;
516 dai-format = "i2s";
517 mclk-fs = <256>;
518 dai-tdm-slot-num = <2>;
519 dai-tdm-slot-width = <32>;
524 sai2b: audio-controller@4400b024 {
525 dma-names = "rx";
528 clock-names = "sai_ck", "MCLK";
533 remote-endpoint = <&cs42l51_rx_endpoint>;
534 dai-format = "i2s";
535 mclk-fs = <256>;
536 dai-tdm-slot-num = <2>;
537 dai-tdm-slot-width = <32>;
544 pinctrl-names = "default", "opendrain", "sleep";
545 pinctrl-0 = <&sdmmc1_b4_pins_a>;
546 pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
547 pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
548 cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
549 disable-wp;
550 st,neg-edge;
551 bus-width = <4>;
552 vmmc-supply = <&v3v3>;
557 pinctrl-names = "default", "opendrain", "sleep";
558 pinctrl-0 = <&sdmmc3_b4_pins_a>;
559 pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
560 pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
561 broken-cd;
562 st,neg-edge;
563 bus-width = <4>;
564 vmmc-supply = <&v3v3>;
570 /delete-property/dmas;
571 /delete-property/dma-names;
574 pinctrl-0 = <&pwm1_pins_a>;
575 pinctrl-1 = <&pwm1_sleep_pins_a>;
576 pinctrl-names = "default", "sleep";
585 /delete-property/dmas;
586 /delete-property/dma-names;
589 pinctrl-0 = <&pwm3_pins_a>;
590 pinctrl-1 = <&pwm3_sleep_pins_a>;
591 pinctrl-names = "default", "sleep";
600 /delete-property/dmas;
601 /delete-property/dma-names;
604 pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
605 pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
606 pinctrl-names = "default", "sleep";
615 /delete-property/dmas;
616 /delete-property/dma-names;
619 pinctrl-0 = <&pwm5_pins_a>;
620 pinctrl-1 = <&pwm5_sleep_pins_a>;
621 pinctrl-names = "default", "sleep";
630 /delete-property/dmas;
631 /delete-property/dma-names;
639 /delete-property/dmas;
640 /delete-property/dma-names;
643 pinctrl-0 = <&pwm12_pins_a>;
644 pinctrl-1 = <&pwm12_sleep_pins_a>;
645 pinctrl-names = "default", "sleep";
654 pinctrl-names = "default", "sleep", "idle";
655 pinctrl-0 = <&uart4_pins_a>;
656 pinctrl-1 = <&uart4_sleep_pins_a>;
657 pinctrl-2 = <&uart4_idle_pins_a>;
658 /delete-property/dmas;
659 /delete-property/dma-names;
664 pinctrl-names = "default", "sleep", "idle";
665 pinctrl-0 = <&uart7_pins_c>;
666 pinctrl-1 = <&uart7_sleep_pins_c>;
667 pinctrl-2 = <&uart7_idle_pins_c>;
668 /delete-property/dmas;
669 /delete-property/dma-names;
674 pinctrl-names = "default", "sleep", "idle";
675 pinctrl-0 = <&usart3_pins_c>;
676 pinctrl-1 = <&usart3_sleep_pins_c>;
677 pinctrl-2 = <&usart3_idle_pins_c>;
678 uart-has-rtscts;
684 #address-cells = <1>;
685 #size-cells = <0>;
690 vdd-supply = <&v3v3>;
696 phy-names = "usb2-phy";
697 usb-role-switch;
702 remote-endpoint = <&con_usbotg_hs_ep>;
712 phy-supply = <&vdd_usb>;
713 st,tune-hs-dc-level = <2>;
714 st,enable-fs-rftime-tuning;
715 st,enable-hs-rftime-reduction;
716 st,trim-hs-current = <15>;
717 st,trim-hs-impedance = <1>;
718 st,tune-squelch-level = <3>;
719 st,tune-hs-rx-offset = <2>;
720 st,no-lsfs-sc;
724 phy-supply = <&vdd_usb>;
725 st,tune-hs-dc-level = <2>;
726 st,enable-fs-rftime-tuning;
727 st,enable-hs-rftime-reduction;
728 st,trim-hs-current = <15>;
729 st,trim-hs-impedance = <1>;
730 st,tune-squelch-level = <3>;
731 st,tune-hs-rx-offset = <2>;
732 st,no-lsfs-sc;
736 regulator-min-microvolt = <2500000>;
737 regulator-max-microvolt = <2500000>;
738 vdda-supply = <&vdd>;