Lines Matching +full:vdig +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
3 * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
8 /dts-v1/;
11 #include "stm32mp15xc-lxa-tac.dtsi"
15 compatible = "lxa,stm32mp157c-tac-gen1", "oct,stm32mp15xx-osd32", "st,stm32mp157";
18 compatible = "pwm-backlight";
19 power-supply = <&v3v3>;
21 brightness-levels = <0 31 63 95 127 159 191 223 255>;
22 default-brightness-level = <7>;
26 reg_iobus_12v: regulator-iobus-12v {
27 compatible = "regulator-fixed";
28 vin-supply = <®_12v>;
31 enable-active-high;
32 regulator-max-microvolt = <12000000>;
33 regulator-min-microvolt = <12000000>;
34 regulator-name = "12V_IOBUS";
39 pinctrl-names = "default";
40 pinctrl-0 = <&adc1_ain_pins_a>;
41 vdd-supply = <&vdd>;
42 vdda-supply = <&vdda>;
43 vref-supply = <&vrefbuf>;
47 st,adc-channels = <0 1 2 5 9 10 13 15>;
48 st,min-sample-time-nsecs = <5000>;
49 #address-cells = <1>;
50 #size-cells = <0>;
95 st,adc-channels = <12>;
96 st,min-sample-time-nsecs = <500000>;
97 #address-cells = <1>;
98 #size-cells = <0>;
109 gpio-line-names = "", "", "STACK_CS2", "", "STACK_CS3", /* 0 */
116 gpio-line-names = "", "STACK_CS1", "", "", "", /* 0 */
122 gpio-line-names = "TP35", "", "", "", "CAN_1_120R", /* 0 */
129 gpio-line-names = "ETH_RESET", "", "", "", "", /* 0 */
144 #gpio-cells = <2>;
145 gpio-controller;
146 gpio-line-names = "DUT_PWR_EN", "DUT_PWR_DISCH", "DUT_PWR_ADCRST", "";
154 spi-max-frequency = <5000000>;
155 vdd-supply = <®_pb_3v3>;
156 vdig-supply = <®_pb_3v3>;
157 reset-gpios = <&powerboard_gpio 2 GPIO_ACTIVE_HIGH>;
159 shunt-resistor-micro-ohms = <15000>;
165 /delete-property/dmas;
166 /delete-property/dma-names;
171 pinctrl-names = "default", "sleep";
172 pinctrl-0 = <&pwm1_pins_c>;
173 pinctrl-1 = <&pwm1_sleep_pins_c>;