Lines Matching +full:vs +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
6 /dts-v1/;
8 #include "stm32mp153c-lxa-fairytux2.dtsi"
12 compatible = "lxa,stm32mp153c-fairytux2-gen2", "oct,stm32mp153x-osd32", "st,stm32mp153";
14 gpio-keys {
15 compatible = "gpio-keys";
17 button-left {
23 button-right {
32 gpio-line-names = "", "", "", "", "", /* 0 */
39 gpio-line-names = "", "", "", "", "LCD_RESET", /* 0 */
46 gpio-line-names = "GPIO2", "", "", "", "", /* 0 */
52 pinctrl-names = "default", "sleep";
53 pinctrl-0 = <&i2c1_pins_b>;
54 pinctrl-1 = <&i2c1_sleep_pins_b>;
60 gpio-controller;
61 #gpio-cells = <2>;
62 interrupt-parent = <&gpioh>;
64 interrupt-controller;
65 pinctrl-names = "default";
66 pinctrl-0 = <&board_tca6408_pins>;
67 #interrupt-cells = <2>;
68 vcc-supply = <&v3v3_hdmi>;
69 gpio-line-names = "LED1_GA_YK", "LED2_GA_YK", "LED1_GK_YA", "USB_CC_ALERT",
76 interrupt-parent = <&io_board_gpio>;
78 vdd-supply = <®_5v>;
79 vsys-supply = <&v3v3_hdmi>;
82 compatible = "usb-c-connector";
83 label = "USB-C";
84 power-role = "dual";
85 typec-power-opmode = "default";
89 remote-endpoint = <&usbotg_hs_ep>;
95 temperature-sensor@48 {
100 * always-on 5V supply.
101 * The required pull-up resistors however are on v3v3_hdmi.
103 vs-supply = <&v3v3_hdmi>;
109 vcc-supply = <&v3v3_hdmi>;
118 led-2 {
126 rts-gpios = <&gpiod 12 GPIO_ACTIVE_LOW>;
127 cts-gpios = <&gpiod 11 GPIO_ACTIVE_LOW>;
131 usb-role-switch;
135 remote-endpoint = <&con_usbotg_hs_ep>;
141 board_tca6408_pins: stusb1600-0 {
144 bias-pull-up;