Lines Matching +full:neg +full:- +full:edge

2  * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
4  * This file is dual-licensed: you can use it either under the terms
43 /dts-v1/;
45 #include "stm32h7-pinctrl.dtsi"
48 	model = "STMicroelectronics STM32H743i-EVAL board";
49 	compatible = "st,stm32h743i-eval", "st,stm32h743";
53 		stdout-path = "serial0:115200n8";
65 	vdda: regulator-vdda {
66 		compatible = "regulator-fixed";
67 		regulator-name = "vdda";
68 		regulator-min-microvolt = <3300000>;
69 		regulator-max-microvolt = <3300000>;
70 		regulator-always-on;
73 	v2v9_sd: regulator-v2v9_sd {
74 		compatible = "regulator-fixed";
75 		regulator-name = "v2v9_sd";
76 		regulator-min-microvolt = <2900000>;
77 		regulator-max-microvolt = <2900000>;
78 		regulator-always-on;
81 	usbotg_hs_phy: usb-phy {
82 		#phy-cells = <0>;
83 		compatible = "usb-nop-xceiv";
85 		clock-names = "main_clk";
90 	vdda-supply = <&vdda>;
91 	vref-supply = <&vdda>;
95 		st,adc-channels = <0>;
101 	clock-frequency = <25000000>;
105 	pinctrl-0 = <&i2c1_pins_a>;
106 	pinctrl-names = "default";
107 	i2c-scl-rising-time-ns = <185>;
108 	i2c-scl-falling-time-ns = <20>;
118 	pinctrl-0 = <&ethernet_rmii>;
119 	pinctrl-names = "default";
120 	phy-mode = "rmii";
121 	phy-handle = <&phy0>;
124 		#address-cells = <1>;
125 		#size-cells = <0>;
126 		compatible = "snps,dwmac-mdio";
127 		phy0: ethernet-phy@0 {
134 	pinctrl-names = "default", "opendrain", "sleep";
135 	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
136 	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
137 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
138 	broken-cd;
139 	st,sig-dir;
140 	st,neg-edge;
141 	st,use-ckin;
142 	bus-width = <4>;
143 	vmmc-supply = <&v2v9_sd>;
148 	pinctrl-0 = <&usart1_pins>;
149 	pinctrl-names = "default";
154 	pinctrl-0 = <&usbotg_hs_pins_a>;
155 	pinctrl-names = "default";
157 	phy-names = "usb2-phy";