Lines Matching +full:input +full:- +full:pins
1 // SPDX-License-Identifier: GPL-2.0-or-later
6 #include "ste-ab8505.dtsi"
13 pinctrl-names = "default", "sleep";
14 pinctrl-0 = <&usb_a_1_default>;
15 pinctrl-1 = <&usb_a_1_sleep>;
20 regulator-name = "V-DISPLAY";
24 regulator-name = "V-eMMC1";
28 regulator-name = "V-MMC-SD";
32 regulator-name = "V-INTCORE";
36 regulator-name = "V-TVOUT";
40 regulator-name = "V-AUD";
44 regulator-name = "V-AMIC1";
48 regulator-name = "V-AMIC2";
52 regulator-name = "V-DMIC";
56 regulator-name = "V-CSI/DSI";
62 pinctrl-names = "default";
63 pinctrl-0 = <&gpio2_default_mode>,
88 * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
89 * are muxed in as GPIO, and configured as INPUT PULL DOWN
98 pins = "GPIO2_T9";
99 input-enable;
100 bias-pull-down;
111 pins = "GPIO4_W2";
112 input-enable;
113 bias-pull-down;
124 pins = "GPIO10_U17";
125 input-enable;
126 bias-pull-down;
137 pins = "GPIO11_AA18";
138 input-enable;
139 bias-pull-down;
150 pins = "GPIO12_U16";
151 input-enable;
152 bias-pull-down;
163 pins = "GPIO13_W17";
164 input-enable;
165 bias-pull-down;
176 pins = "GPIO16_F15";
177 input-enable;
178 bias-pull-down;
189 pins = "GPIO24_T14";
190 input-enable;
191 bias-pull-down;
202 pins = "GPIO25_R16";
203 input-enable;
204 bias-pull-down;
215 pins = "GPIO36_A17";
216 input-enable;
217 bias-pull-down;
228 pins = "GPIO37_E15";
229 input-enable;
230 bias-pull-down;
241 pins = "GPIO38_C17";
242 input-enable;
243 bias-pull-down;
254 pins = "GPIO39_E16";
255 input-enable;
256 bias-pull-down;
267 pins = "GPIO42_U2";
268 input-enable;
269 bias-pull-down;
274 * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
283 pins = "GPIO26_M16";
284 output-low;
295 pins = "GPIO35_W15";
296 output-low;
301 * This sets up the YCBCR connector pins, i.e. analog video out.
302 * Set as input with no bias.
311 pins = "GPIO6_Y18",
315 input-enable;
316 bias-disable;
320 /* This sets up the PWM pins 14 and 15 */
328 pins = "GPIO14_F14",
330 input-enable;
331 bias-pull-down;
343 pins = "GPIO17_P5",
347 input-enable;
348 bias-pull-down;
352 /* This sets up the USB UICC pins */
360 pins = "GPIO21_H19",
363 input-enable;
364 bias-pull-down;
368 /* This sets up the microphone pins */
378 pins = "GPIO27_J6",
384 input-enable;
385 bias-pull-down;
396 pins = "GPIO34_R17";
397 input-enable;
398 bias-pull-down;
402 /* Modem I2C setup (SCL and SDA pins) */
410 pins = "GPIO40_T19",
412 input-enable;
413 bias-pull-down;
418 * Clock output pins associated with regulators.
427 pins = "GPIO1_T10";
428 input-enable;
429 bias-disable;
438 pins = "GPIO1_T10";
439 input-enable;
440 bias-pull-down;
451 pins = "GPIO3_U9";
452 input-enable;
453 bias-disable;
462 pins = "GPIO3_U9";
463 input-enable;
464 bias-pull-down;