Lines Matching +full:0 +full:v_lcd
27 reg = <0x30000000 0x05000000>,
28 <0x40000000 0x10000000>,
29 <0x50000000 0x08000000>;
40 reg = <0x43000000 0x2000000>;
46 reg = <0x51000000 0x2000000>;
50 pmic_ap_clk: clock-0 {
53 #clock-cells = <0>;
59 #sound-dai-cells = <0>;
62 vibrator_pwr: regulator-fixed-0 {
69 pinctrl-0 = <&vibrator_ena>;
81 pinctrl-0 = <&touchkey_vdd_ena>;
93 pinctrl-0 = <&gp2a_power>;
100 pinctrl-0 = <&wlan_gpio_rst>;
105 i2c_sound: i2c-gpio-0 {
111 #size-cells = <0>;
114 pinctrl-0 = <&sound_i2c_pins>;
118 reg = <0x1a>;
120 #sound-dai-cells = <0>;
134 wlf,gpio-cfg = <0xa101 0x8100 0x0100 0x0100 0x8100
135 0xa101 0x0100 0x8100 0x0100 0x0100
136 0x0100>;
145 assigned-clock-rates = <0>;
149 pinctrl-0 = <&codec_ldo>;
159 #size-cells = <0>;
162 pinctrl-0 = <&accel_i2c_pins>;
166 reg = <0x38>;
175 sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
179 #size-cells = <0>;
182 pinctrl-0 = <&pmic_i2c_pins>;
186 reg = <0x66>;
196 max8998,pmic-buck2-default-dvs-idx = <0>;
201 pinctrl-0 = <&pmic_dvs_pins &pmic_irq>;
290 regulator-name = "CAM_AF_3.0V";
350 regulator-name = "VCC_3.0V_LCD";
429 #size-cells = <0>;
432 pinctrl-0 = <&musb_i2c_pins>;
436 reg = <0x25>;
441 pinctrl-0 = <&musb_irq>;
448 scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
451 #size-cells = <0>;
454 pinctrl-0 = <&fg_i2c_pins>;
458 reg = <0x36>;
464 sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
468 #size-cells = <0>;
471 pinctrl-0 = <&touchkey_i2c_pins>;
475 reg = <0x20>;
484 pinctrl-0 = <&touchkey_irq>;
494 #size-cells = <0>;
497 pinctrl-0 = <&prox_i2c_pins>;
501 reg = <0x44>;
508 sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
509 sharp,proximity-close-hysteresis = /bits/ 8 <0x20>;
512 pinctrl-0 = <&gp2a_irq>;
519 scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
522 #size-cells = <0>;
525 pinctrl-0 = <&magnetometer_i2c_pins>;
534 pwms = <&pwm 1 44642 0>;
538 pinctrl-0 = <&pwm1_out>;
544 offset = <0x681c>; /* PS_HOLD_CONTROL */
545 value = <0x5200>;
551 #size-cells = <0>;
559 pinctrl-0 = <&lcd_spi_pins>;
561 panel@0 {
563 reg = <0>;
570 pinctrl-0 = <&panel_rst>;
590 #io-channel-cells = <0>;
596 pinctrl-0 = <&lcd_clk &lcd_data24>;
603 #size-cells = <0>;
623 samsung,i2c-slave-addr = <0x10>;
628 reg = <0x4a>;
632 pinctrl-0 = <&ts_irq>;
697 samsung,pin-val = <0>;
742 samsung,pins = "gpj0-0", "gpj0-1";
768 samsung,pins = "gpj3-0", "gpj3-1";
792 samsung,pins = "gpj4-0", "gpj4-3";
811 samsung,pins = "mp05-0", "mp05-1";
840 #size-cells = <0>;
844 pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>;
855 assigned-clock-rates = <0>, <50000000>;
871 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;
876 assigned-clock-rates = <0>, <50000000>;
882 assigned-clock-rates = <0>, <111166667>;
891 pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake