Lines Matching +full:exynos5250 +full:- +full:mixer
1 // SPDX-License-Identifier: GPL-2.0
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/clock/maxim,max77686.h>
10 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/sound/samsung-i2s.h>
13 #include "exynos5250.dtsi"
30 stdout-path = "serial3:115200n8";
33 gpio-keys {
34 compatible = "gpio-keys";
35 pinctrl-names = "default";
36 pinctrl-0 = <&power_key_irq &lid_irq>;
38 power-key {
42 wakeup-source;
45 lid-switch {
48 linux,input-type = <5>; /* EV_SW */
50 debounce-interval = <1>;
51 wakeup-source;
55 vbat: vbat-fixed-regulator {
56 compatible = "regulator-fixed";
57 regulator-name = "vbat-supply";
58 regulator-boot-on;
61 i2c-arbitrator {
62 compatible = "i2c-arb-gpio-challenge";
63 i2c-parent = <&i2c_4>;
65 our-claim-gpios = <&gpf0 3 GPIO_ACTIVE_LOW>;
66 their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
67 slew-delay-us = <10>;
68 wait-retry-us = <3000>;
69 wait-free-us = <50000>;
71 pinctrl-names = "default";
72 pinctrl-0 = <&arb_our_claim &arb_their_claim>;
75 i2c_104: i2c-arb {
76 #address-cells = <1>;
77 #size-cells = <0>;
79 battery: sbs-battery@b {
80 compatible = "sbs,sbs-battery";
82 sbs,poll-retry-count = <1>;
85 cros_ec: embedded-controller@1e {
86 compatible = "google,cros-ec-i2c";
89 interrupt-parent = <&gpx1>;
90 pinctrl-names = "default";
91 pinctrl-0 = <&ec_irq>;
92 wakeup-source;
95 power-regulator@48 {
103 pinctrl-names = "default";
104 pinctrl-0 = <&tps65090_irq>;
106 vsys1-supply = <&vbat>;
107 vsys2-supply = <&vbat>;
108 vsys3-supply = <&vbat>;
109 infet1-supply = <&vbat>;
110 infet2-supply = <&vbat>;
111 infet3-supply = <&vbat>;
112 infet4-supply = <&vbat>;
113 infet5-supply = <&vbat>;
114 infet6-supply = <&vbat>;
115 infet7-supply = <&vbat>;
116 vsys-l1-supply = <&vbat>;
117 vsys-l2-supply = <&vbat>;
121 ti,enable-ext-control;
124 ti,enable-ext-control;
127 ti,enable-ext-control;
130 regulator-name = "vcd_led";
131 ti,overcurrent-wait = <3>;
134 regulator-name = "video_mid";
135 regulator-always-on;
136 ti,overcurrent-wait = <3>;
139 regulator-name = "wwan_r";
140 regulator-always-on;
141 ti,overcurrent-wait = <3>;
144 regulator-name = "sdcard";
145 ti,overcurrent-wait = <3>;
148 regulator-name = "camout";
149 regulator-always-on;
150 ti,overcurrent-wait = <3>;
153 regulator-name = "lcd_vdd";
154 ti,overcurrent-wait = <3>;
157 regulator-name = "video_mid_1a";
158 regulator-always-on;
159 ti,overcurrent-wait = <3>;
168 compatible = "ti,tps65090-charger";
175 samsung,i2s-controller = <&i2s0>;
178 usb3_vbus_reg: regulator-usb3 {
179 compatible = "regulator-fixed";
180 regulator-name = "P5.0V_USB3CON";
181 regulator-min-microvolt = <5000000>;
182 regulator-max-microvolt = <5000000>;
184 pinctrl-names = "default";
185 pinctrl-0 = <&usb3_vbus_en>;
186 enable-active-high;
189 fixed-rate-clocks {
191 compatible = "samsung,clock-xxti";
192 clock-frequency = <24000000>;
197 compatible = "pwm-backlight";
199 brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
200 default-brightness-level = <7>;
201 enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
202 power-supply = <&fet1>;
203 pinctrl-0 = <&pwm0_out>;
204 pinctrl-names = "default";
209 power-supply = <&fet6>;
214 remote-endpoint = <&bridge_out>;
219 mmc3_pwrseq: mmc3-pwrseq {
220 compatible = "mmc-pwrseq-simple";
221 reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
224 clock-names = "ext_clock";
229 assigned-clocks = <&clock CLK_FOUT_EPLL>;
230 assigned-clock-rates = <49152000>;
234 assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
235 assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
239 cpu0-supply = <&buck2_reg>;
244 pinctrl-names = "default";
245 pinctrl-0 = <&dp_hpd>;
246 samsung,color-space = <0>;
247 samsung,color-depth = <1>;
248 samsung,link-rate = <0x0a>;
249 samsung,lane-count = <2>;
250 hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
255 remote-endpoint = <&bridge_in>;
262 samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
267 samsung,invert-vclk;
272 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
273 pinctrl-names = "default";
274 pinctrl-0 = <&hdmi_hpd_irq>;
276 hdmi-en-supply = <&tps65090_fet7>;
277 vdd-supply = <&ldo8_reg>;
278 vdd_osc-supply = <&ldo10_reg>;
279 vdd_pll-supply = <&ldo8_reg>;
288 samsung,i2c-sda-delay = <100>;
289 samsung,i2c-max-bus-freq = <378000>;
293 interrupt-parent = <&gpx3>;
295 pinctrl-names = "default";
296 pinctrl-0 = <&max77686_irq>;
297 wakeup-source;
299 #clock-cells = <1>;
301 voltage-regulators {
303 regulator-name = "P1.0V_LDO_OUT1";
304 regulator-min-microvolt = <1000000>;
305 regulator-max-microvolt = <1000000>;
306 regulator-always-on;
310 regulator-name = "P1.8V_LDO_OUT2";
311 regulator-min-microvolt = <1800000>;
312 regulator-max-microvolt = <1800000>;
313 regulator-always-on;
317 regulator-name = "P1.8V_LDO_OUT3";
318 regulator-min-microvolt = <1800000>;
319 regulator-max-microvolt = <1800000>;
320 regulator-always-on;
324 regulator-name = "P1.1V_LDO_OUT7";
325 regulator-min-microvolt = <1100000>;
326 regulator-max-microvolt = <1100000>;
327 regulator-always-on;
331 regulator-name = "P1.0V_LDO_OUT8";
332 regulator-min-microvolt = <1000000>;
333 regulator-max-microvolt = <1000000>;
334 regulator-always-on;
338 regulator-name = "P1.8V_LDO_OUT10";
339 regulator-min-microvolt = <1800000>;
340 regulator-max-microvolt = <1800000>;
341 regulator-always-on;
345 regulator-name = "P3.0V_LDO_OUT12";
346 regulator-min-microvolt = <3000000>;
347 regulator-max-microvolt = <3000000>;
348 regulator-always-on;
352 regulator-name = "P1.8V_LDO_OUT14";
353 regulator-min-microvolt = <1800000>;
354 regulator-max-microvolt = <1800000>;
355 regulator-always-on;
359 regulator-name = "P1.0V_LDO_OUT15";
360 regulator-min-microvolt = <1000000>;
361 regulator-max-microvolt = <1000000>;
362 regulator-always-on;
366 regulator-name = "P1.8V_LDO_OUT16";
367 regulator-min-microvolt = <1800000>;
368 regulator-max-microvolt = <1800000>;
369 regulator-always-on;
373 regulator-name = "vdd_mif";
374 regulator-min-microvolt = <950000>;
375 regulator-max-microvolt = <1300000>;
376 regulator-always-on;
377 regulator-boot-on;
381 regulator-name = "vdd_arm";
382 regulator-min-microvolt = <850000>;
383 regulator-max-microvolt = <1350000>;
384 regulator-always-on;
385 regulator-boot-on;
389 regulator-name = "vdd_int";
390 regulator-min-microvolt = <900000>;
391 regulator-max-microvolt = <1200000>;
392 regulator-always-on;
393 regulator-boot-on;
397 regulator-name = "vdd_g3d";
398 regulator-min-microvolt = <850000>;
399 regulator-max-microvolt = <1300000>;
400 regulator-always-on;
401 regulator-boot-on;
405 regulator-name = "P1.8V_BUCK_OUT5";
406 regulator-min-microvolt = <1800000>;
407 regulator-max-microvolt = <1800000>;
408 regulator-always-on;
409 regulator-boot-on;
413 regulator-name = "P1.35V_BUCK_OUT6";
414 regulator-min-microvolt = <1350000>;
415 regulator-max-microvolt = <1350000>;
416 regulator-always-on;
420 regulator-name = "P2.0V_BUCK_OUT7";
421 regulator-min-microvolt = <2000000>;
422 regulator-max-microvolt = <2000000>;
423 regulator-always-on;
427 regulator-name = "P2.85V_BUCK_OUT8";
428 regulator-min-microvolt = <2850000>;
429 regulator-max-microvolt = <2850000>;
430 regulator-always-on;
438 samsung,i2c-sda-delay = <100>;
439 samsung,i2c-max-bus-freq = <378000>;
445 interrupt-parent = <&gpx1>;
446 wakeup-source;
452 * double-pulling gets us out of spec in some cases.
455 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
461 samsung,i2c-sda-delay = <100>;
462 samsung,i2c-max-bus-freq = <66000>;
467 samsung,i2c-sda-delay = <100>;
468 samsung,i2c-max-bus-freq = <66000>;
473 samsung,i2c-sda-delay = <100>;
474 samsung,i2c-max-bus-freq = <66000>;
479 samsung,i2c-sda-delay = <100>;
480 samsung,i2c-max-bus-freq = <66000>;
485 samsung,i2c-sda-delay = <100>;
486 samsung,i2c-max-bus-freq = <66000>;
488 ptn3460: lvds-bridge@20 {
491 powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
492 reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
493 edid-emulation = <5>;
496 #address-cells = <1>;
497 #size-cells = <0>;
503 remote-endpoint = <&panel_in>;
511 remote-endpoint = <&dp_out>;
521 samsung,i2c-sda-delay = <100>;
522 samsung,i2c-max-bus-freq = <378000>;
526 assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
527 assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
532 mali-supply = <&buck4_reg>;
536 &mixer {
543 non-removable;
544 samsung,dw-mshc-ciu-div = <3>;
545 samsung,dw-mshc-sdr-timing = <2 3>;
546 samsung,dw-mshc-ddr-timing = <1 2>;
547 pinctrl-names = "default";
548 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
549 bus-width = <8>;
550 cap-mmc-highspeed;
551 mmc-ddr-1_8v;
557 card-detect-delay = <200>;
558 samsung,dw-mshc-ciu-div = <3>;
559 samsung,dw-mshc-sdr-timing = <2 3>;
560 samsung,dw-mshc-ddr-timing = <1 2>;
561 pinctrl-names = "default";
562 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
563 bus-width = <4>;
564 wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
565 cap-sd-highspeed;
576 non-removable;
577 cap-sdio-irq;
578 keep-power-in-suspend;
579 samsung,dw-mshc-ciu-div = <3>;
580 samsung,dw-mshc-sdr-timing = <2 3>;
581 samsung,dw-mshc-ddr-timing = <1 2>;
582 pinctrl-names = "default";
583 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
584 bus-width = <4>;
585 cap-sd-highspeed;
586 mmc-pwrseq = <&mmc3_pwrseq>;
590 wifi_en: wifi-en-pins {
591 samsung,pins = "gpx0-1";
592 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
593 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
594 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
597 wifi_rst: wifi-rst-pins {
598 samsung,pins = "gpx0-2";
599 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
600 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
601 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
604 power_key_irq: power-key-irq-pins {
605 samsung,pins = "gpx1-3";
606 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
607 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
608 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
611 ec_irq: ec-irq-pins {
612 samsung,pins = "gpx1-6";
613 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
614 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
615 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
618 tps65090_irq: tps65090-irq-pins {
619 samsung,pins = "gpx2-6";
620 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
621 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
622 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
625 usb3_vbus_en: usb3-vbus-en-pins {
626 samsung,pins = "gpx2-7";
627 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
628 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
629 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
632 max77686_irq: max77686-irq-pins {
633 samsung,pins = "gpx3-2";
634 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
635 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
636 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
639 lid_irq: lid-irq-pins {
640 samsung,pins = "gpx3-5";
641 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
642 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
643 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
646 hdmi_hpd_irq: hdmi-hpd-irq-pins {
647 samsung,pins = "gpx3-7";
648 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
649 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
650 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
655 arb_their_claim: arb-their-claim-pins {
656 samsung,pins = "gpe0-4";
657 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
658 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
659 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
662 arb_our_claim: arb-our-claim-pins {
663 samsung,pins = "gpf0-3";
664 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
665 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
666 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
671 assigned-clocks = <&pmu_system_controller 0>;
672 assigned-clock-parents = <&clock CLK_FIN_PLL>;
678 clock-names = "rtc", "rtc_src";
682 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
686 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
690 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
691 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
696 samsung,spi-src-clk = <0>;
697 num-cs = <1>;
698 cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
702 vdd10-supply = <&ldo15_reg>;
703 vdd33-supply = <&ldo12_reg>;
711 vbus-supply = <&usb3_vbus_reg>;
714 #include "../cros-ec-keyboard.dtsi"