Lines Matching +full:codec +full:- +full:mclk1
1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/clock/samsung,s2mps11.h>
14 #include <dt-bindings/sound/samsung-i2s.h>
32 stdout-path = "serial2:115200n8";
35 gpio-keys {
36 compatible = "gpio-keys";
38 key-menu {
39 label = "SW-TACT2";
42 wakeup-source;
45 key-home {
46 label = "SW-TACT3";
49 wakeup-source;
52 key-up {
53 label = "SW-TACT4";
56 wakeup-source;
59 key-down {
60 label = "SW-TACT5";
63 wakeup-source;
66 key-back {
67 label = "SW-TACT6";
70 wakeup-source;
73 key-wakeup {
74 label = "SW-TACT7";
77 wakeup-source;
82 * For unknown reasons HDMI-DDC does not work with Exynos I2C
85 i2c_ddc: i2c-10 {
86 compatible = "i2c-gpio";
87 pinctrl-names = "default";
88 pinctrl-0 = <&i2c2_gpio_bus>;
89 sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
90 scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
91 i2c-gpio,delay-us = <2>;
95 compatible = "boe,hv070wsa-100";
96 power-supply = <&vcc_3v3_reg>;
97 enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
100 remote-endpoint = <&bridge_out_ep>;
105 main_dc_reg: regulator-0 {
106 compatible = "regulator-fixed";
107 regulator-name = "MAIN_DC";
108 regulator-always-on;
111 mmc_reg: regulator-1 {
112 compatible = "regulator-fixed";
113 regulator-name = "VDD_MMC";
114 regulator-min-microvolt = <2800000>;
115 regulator-max-microvolt = <2800000>;
116 regulator-always-on;
119 reg_hdmi_en: regulator-2 {
120 compatible = "regulator-fixed";
121 regulator-name = "hdmi-en";
122 regulator-always-on;
125 vcc_1v2_reg: regulator-3 {
126 compatible = "regulator-fixed";
127 regulator-name = "VCC_1V2";
128 regulator-min-microvolt = <1200000>;
129 regulator-max-microvolt = <1200000>;
130 regulator-always-on;
133 vcc_1v8_reg: regulator-4 {
134 compatible = "regulator-fixed";
135 regulator-name = "VCC_1V8";
136 regulator-min-microvolt = <1800000>;
137 regulator-max-microvolt = <1800000>;
138 regulator-always-on;
141 vcc_3v3_reg: regulator-5 {
142 compatible = "regulator-fixed";
143 regulator-name = "VCC_3V3";
144 regulator-min-microvolt = <3300000>;
145 regulator-max-microvolt = <3300000>;
146 regulator-always-on;
150 compatible = "samsung,arndale-wm1811";
151 samsung,audio-cpu = <&i2s0>;
152 samsung,audio-codec = <&wm1811>;
155 fixed-rate-clocks {
157 compatible = "samsung,clock-xxti";
158 clock-frequency = <24000000>;
163 usb_hub: usb-hub {
166 reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
167 connect-gpios = <&gpd1 7 GPIO_ACTIVE_HIGH>;
172 assigned-clocks = <&clock CLK_FOUT_EPLL>;
173 assigned-clock-rates = <49152000>;
177 assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
178 assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
182 cpu0-supply = <&buck2_reg>;
186 vddcore-supply = <&ldo8_reg>;
187 vddio-supply = <&ldo10_reg>;
188 samsung,pll-clock-frequency = <24000000>;
189 samsung,burst-clock-frequency = <320000000>;
190 samsung,esc-clock-frequency = <10000000>;
196 vddc-supply = <&vcc_1v2_reg>;
197 vddio-supply = <&vcc_1v8_reg>;
198 vddlvds-supply = <&vcc_3v3_reg>;
199 reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
202 #address-cells = <1>;
203 #size-cells = <0>;
207 remote-endpoint = <&panel_ep>;
219 pinctrl-names = "default";
220 pinctrl-0 = <&hdmi_hpd>;
223 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
224 vdd_osc-supply = <&ldo10_reg>;
225 vdd_pll-supply = <&ldo8_reg>;
226 vdd-supply = <&ldo8_reg>;
231 samsung,i2c-sda-delay = <100>;
232 samsung,i2c-max-bus-freq = <20000>;
233 samsung,i2c-slave-addr = <0x66>;
236 compatible = "samsung,s5m8767-pmic";
238 interrupt-parent = <&gpx3>;
240 pinctrl-names = "default";
241 pinctrl-0 = <&s5m8767_irq>;
242 wakeup-source;
244 vinb1-supply = <&main_dc_reg>;
245 vinb2-supply = <&main_dc_reg>;
246 vinb3-supply = <&main_dc_reg>;
247 vinb4-supply = <&main_dc_reg>;
248 vinb5-supply = <&main_dc_reg>;
249 vinb6-supply = <&main_dc_reg>;
250 vinb7-supply = <&main_dc_reg>;
251 vinb8-supply = <&main_dc_reg>;
252 vinb9-supply = <&main_dc_reg>;
254 vinl1-supply = <&buck7_reg>;
255 vinl2-supply = <&buck7_reg>;
256 vinl3-supply = <&buck7_reg>;
257 vinl4-supply = <&main_dc_reg>;
258 vinl5-supply = <&main_dc_reg>;
259 vinl6-supply = <&main_dc_reg>;
260 vinl7-supply = <&main_dc_reg>;
261 vinl8-supply = <&buck8_reg>;
262 vinl9-supply = <&buck8_reg>;
264 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
267 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
272 compatible = "samsung,s5m8767-clk";
273 #clock-cells = <1>;
274 clock-output-names = "s5m8767_ap", "unused1", "unused2";
279 regulator-name = "VDD_ALIVE_1.0V";
280 regulator-min-microvolt = <1100000>;
281 regulator-max-microvolt = <1100000>;
282 regulator-always-on;
283 regulator-boot-on;
288 regulator-name = "VDD_28IO_DP_1.35V";
289 regulator-min-microvolt = <1200000>;
290 regulator-max-microvolt = <1200000>;
291 regulator-always-on;
292 regulator-boot-on;
297 regulator-name = "VDD_COMMON1_1.8V";
298 regulator-min-microvolt = <1800000>;
299 regulator-max-microvolt = <1800000>;
300 regulator-always-on;
301 regulator-boot-on;
306 regulator-name = "VDD_IOPERI_1.8V";
307 regulator-min-microvolt = <1800000>;
308 regulator-max-microvolt = <1800000>;
309 regulator-always-on;
314 regulator-name = "VDD_EXT_1.8V";
315 regulator-min-microvolt = <1800000>;
316 regulator-max-microvolt = <1800000>;
317 regulator-always-on;
318 regulator-boot-on;
323 regulator-name = "VDD_MPLL_1.1V";
324 regulator-min-microvolt = <1100000>;
325 regulator-max-microvolt = <1100000>;
326 regulator-always-on;
327 regulator-boot-on;
332 regulator-name = "VDD_XPLL_1.1V";
333 regulator-min-microvolt = <1100000>;
334 regulator-max-microvolt = <1100000>;
335 regulator-always-on;
336 regulator-boot-on;
341 regulator-name = "VDD_COMMON2_1.0V";
342 regulator-min-microvolt = <1000000>;
343 regulator-max-microvolt = <1000000>;
344 regulator-always-on;
345 regulator-boot-on;
350 regulator-name = "VDD_33ON_3.0V";
351 regulator-min-microvolt = <3000000>;
352 regulator-max-microvolt = <3000000>;
357 regulator-name = "VDD_COMMON3_1.8V";
358 regulator-min-microvolt = <1800000>;
359 regulator-max-microvolt = <1800000>;
360 regulator-always-on;
361 regulator-boot-on;
366 regulator-name = "VDD_ABB2_1.8V";
367 regulator-min-microvolt = <1800000>;
368 regulator-max-microvolt = <1800000>;
369 regulator-always-on;
370 regulator-boot-on;
375 regulator-name = "VDD_USB_3.0V";
376 regulator-min-microvolt = <3000000>;
377 regulator-max-microvolt = <3000000>;
378 regulator-always-on;
379 regulator-boot-on;
384 regulator-name = "VDDQ_C2C_W_1.8V";
385 regulator-min-microvolt = <1800000>;
386 regulator-max-microvolt = <1800000>;
387 regulator-always-on;
388 regulator-boot-on;
393 regulator-name = "VDD18_ABB0_3_1.8V";
394 regulator-min-microvolt = <1800000>;
395 regulator-max-microvolt = <1800000>;
396 regulator-always-on;
397 regulator-boot-on;
402 regulator-name = "VDD10_COMMON4_1.0V";
403 regulator-min-microvolt = <1000000>;
404 regulator-max-microvolt = <1000000>;
405 regulator-always-on;
406 regulator-boot-on;
411 regulator-name = "VDD18_HSIC_1.8V";
412 regulator-min-microvolt = <1800000>;
413 regulator-max-microvolt = <1800000>;
414 regulator-always-on;
415 regulator-boot-on;
420 regulator-name = "VDDQ_MMC2_3_2.8V";
421 regulator-min-microvolt = <2800000>;
422 regulator-max-microvolt = <2800000>;
423 regulator-always-on;
424 regulator-boot-on;
429 regulator-name = "VDD_33ON_2.8V";
430 regulator-min-microvolt = <2800000>;
431 regulator-max-microvolt = <2800000>;
436 regulator-name = "EXT_33_OFF";
437 regulator-min-microvolt = <3300000>;
438 regulator-max-microvolt = <3300000>;
443 regulator-name = "EXT_28_OFF";
444 regulator-min-microvolt = <2800000>;
445 regulator-max-microvolt = <2800000>;
450 regulator-name = "PVDD_LDO25";
451 regulator-min-microvolt = <1200000>;
452 regulator-max-microvolt = <1200000>;
457 regulator-name = "EXT_18_OFF";
458 regulator-min-microvolt = <1800000>;
459 regulator-max-microvolt = <1800000>;
464 regulator-name = "VDD_MIF";
465 regulator-min-microvolt = <950000>;
466 regulator-max-microvolt = <1200000>;
467 regulator-always-on;
468 regulator-boot-on;
473 regulator-name = "VDD_ARM";
474 regulator-min-microvolt = <912500>;
475 regulator-max-microvolt = <1300000>;
476 regulator-always-on;
477 regulator-boot-on;
482 regulator-name = "VDD_INT";
483 regulator-min-microvolt = <900000>;
484 regulator-max-microvolt = <1200000>;
485 regulator-always-on;
486 regulator-boot-on;
491 regulator-name = "VDD_G3D";
492 regulator-min-microvolt = <850000>;
493 regulator-max-microvolt = <1300000>;
494 regulator-always-on;
495 regulator-boot-on;
500 regulator-name = "VDD_MEM_1.35V";
501 regulator-min-microvolt = <750000>;
502 regulator-max-microvolt = <1355000>;
503 regulator-always-on;
504 regulator-boot-on;
509 regulator-name = "PVDD_BUCK7";
510 regulator-always-on;
515 regulator-name = "PVDD_BUCK8";
516 regulator-always-on;
521 regulator-name = "VDD_33_OFF_EXT1";
522 regulator-min-microvolt = <750000>;
523 regulator-max-microvolt = <3000000>;
533 wm1811: audio-codec@1a {
537 clock-names = "MCLK1";
539 AVDD2-supply = <&main_dc_reg>;
540 CPVDD-supply = <&main_dc_reg>;
541 DBVDD1-supply = <&main_dc_reg>;
542 DBVDD2-supply = <&main_dc_reg>;
543 DBVDD3-supply = <&main_dc_reg>;
544 LDO1VDD-supply = <&main_dc_reg>;
545 SPKVDD1-supply = <&main_dc_reg>;
546 SPKVDD2-supply = <&main_dc_reg>;
548 wlf,ldo1ena-gpios = <&gpb0 0 GPIO_ACTIVE_HIGH>;
549 wlf,ldo2ena-gpios = <&gpb0 1 GPIO_ACTIVE_HIGH>;
556 samsung,i2c-sda-delay = <100>;
557 samsung,i2c-max-bus-freq = <66000>;
562 samsung,i2c-sda-delay = <100>;
563 samsung,i2c-max-bus-freq = <40000>;
567 assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
568 assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
573 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
577 mali-supply = <&buck4_reg>;
587 broken-cd;
588 card-detect-delay = <200>;
589 samsung,dw-mshc-ciu-div = <3>;
590 samsung,dw-mshc-sdr-timing = <2 3>;
591 samsung,dw-mshc-ddr-timing = <1 2>;
592 vmmc-supply = <&mmc_reg>;
593 pinctrl-names = "default";
594 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
595 bus-width = <8>;
596 cap-mmc-highspeed;
597 mmc-ddr-1_8v;
602 card-detect-delay = <200>;
603 samsung,dw-mshc-ciu-div = <3>;
604 samsung,dw-mshc-sdr-timing = <2 3>;
605 samsung,dw-mshc-ddr-timing = <1 2>;
606 vmmc-supply = <&mmc_reg>;
607 pinctrl-names = "default";
608 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
609 bus-width = <4>;
610 disable-wp;
611 cap-sd-highspeed;
615 s5m8767_irq: s5m8767-irq-pins {
616 samsung,pins = "gpx3-2";
617 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
623 clock-names = "rtc", "rtc_src";
633 samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
641 vdd10-supply = <&ldo15_reg>;
642 vdd33-supply = <&ldo12_reg>;