Lines Matching +full:0 +full:v_lcd
23 reg = <0x40000000 0x10000000
24 0x50000000 0x10000000
25 0x60000000 0x10000000
26 0x70000000 0x10000000>;
40 vemmc_reg: regulator-0 {
105 gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
135 clock-frequency = <0>;
146 #clock-cells = <0>;
181 panel@0 {
182 reg = <0>;
196 timing-0 {
221 assigned-clock-rates = <0>, <160000000>;
229 assigned-clock-rates = <0>, <160000000>;
237 assigned-clock-rates = <0>, <160000000>;
245 assigned-clock-rates = <0>, <160000000>;
265 samsung,i2c-slave-addr = <0x10>;
267 pinctrl-0 = <&i2c3_bus>;
273 reg = <0x48>;
285 samsung,i2c-slave-addr = <0x10>;
287 pinctrl-0 = <&i2c5_bus>;
294 reg = <0x66>;
303 max8997,pmic-buck125-default-dvs-idx = <0>;
307 <&gpl0 0 GPIO_ACTIVE_HIGH>;
384 regulator-name = "VCC_3.3V_LCD";
442 regulator-name = "VCC_SUB_2.0V";
472 samsung,pins = "gpl1-0";
499 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
507 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
518 #size-cells = <0>;
526 pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
540 pinctrl-0 = <&uart0_data &uart0_fctl>;
545 pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
547 shutdown-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;