Lines Matching +full:init +full:- +full:b +full:- +full:gpios

1 // SPDX-License-Identifier: GPL-2.0
5  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
7  * Copyright (c) 2010-2011 Linaro Ltd.
14 /dts-v1/;
16 #include <dt-bindings/gpio/gpio.h>
17 #include "exynos-mfc-reserved-memory.dtsi"
33 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
34 		stdout-path = "serial1:115200n8";
37 	fixed-rate-clocks {
39 			compatible = "samsung,clock-xxti";
40 			clock-frequency = <12000000>;
44 			compatible = "samsung,clock-xusbxti";
45 			clock-frequency = <24000000>;
48 		pmic_ap_clk: pmic-ap-clk {
50 			compatible = "fixed-clock";
51 			#clock-cells = <0>;
52 			clock-frequency = <32768>;
58 	cooling-maps {
61 			cooling-device = <&cpu0 2 2>;
65 			cooling-device = <&cpu0 4 4>;
71 	#address-cells = <1>;
72 	#size-cells = <0>;
73 	samsung,i2c-sda-delay = <100>;
74 	samsung,i2c-max-bus-freq = <100000>;
89 	samsung,keypad-num-rows = <2>;
90 	samsung,keypad-num-columns = <8>;
91 	linux,input-no-autorepeat;
92 	wakeup-source;
93 	pinctrl-names = "default";
94 	pinctrl-0 = <&keypad_rows &keypad_cols>;
97 	key-1 {
103 	key-2 {
109 	key-3 {
115 	key-4 {
121 	key-5 {
127 	key-a {
133 	key-b {
139 	key-c {
145 	key-d {
151 	key-e {
159 	keypad_rows: keypad-rows-pins {
160 		samsung,pins = "gpx2-0", "gpx2-1";
161 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
162 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
163 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
166 	keypad_cols: keypad-cols-pins {
167 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
168 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
169 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
170 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
171 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
177 	clock-names = "rtc", "rtc_src";
181 	bus-width = <4>;
182 	pinctrl-names = "default";
183 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
204 	cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>;
208 		#address-cells = <1>;
209 		#size-cells = <1>;
210 		compatible = "winbond,w25x80", "jedec,spi-nor";
212 		spi-max-frequency = <1000000>;
214 		controller-data {
215 			samsung,spi-feedback-delay = <0>;
219 			label = "U-Boot";
221 			read-only;