Lines Matching +full:int +full:- +full:vref +full:- +full:microvolt
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
7 #include <dt-bindings/input/input.h>
12 compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
25 ir: ir-receiver {
26 compatible = "gpio-ir-receiver";
28 pinctrl-names = "default";
29 pinctrl-0 = <&ir_int>;
32 keys: gpio-keys {
33 compatible = "gpio-keys";
35 key-power {
36 wakeup-source;
40 pinctrl-names = "default";
41 pinctrl-0 = <&pwr_key>;
45 vdd_log: regulator-vdd-log {
46 compatible = "pwm-regulator";
48 regulator-name = "vdd_log";
49 regulator-min-microvolt = <1200000>;
50 regulator-max-microvolt = <1200000>;
51 regulator-always-on;
52 voltage-table = <1000000 100>,
57 vsys: regulator-vsys {
58 compatible = "regulator-fixed";
59 regulator-name = "vsys";
60 regulator-min-microvolt = <5000000>;
61 regulator-max-microvolt = <5000000>;
62 regulator-always-on;
63 regulator-boot-on;
67 vcc_stdby: regulator-stdby {
68 compatible = "regulator-fixed";
69 regulator-name = "5v_stdby";
70 regulator-min-microvolt = <5000000>;
71 regulator-max-microvolt = <5000000>;
72 regulator-always-on;
73 regulator-boot-on;
76 vcc_emmc: regulator-emmc {
77 compatible = "regulator-fixed";
78 regulator-name = "emmc_vccq";
79 regulator-min-microvolt = <3000000>;
80 regulator-max-microvolt = <3000000>;
81 vin-supply = <&vsys>;
84 vcc_sata: regulator-sata {
85 compatible = "regulator-fixed";
86 enable-active-high;
88 pinctrl-names = "default";
89 pinctrl-0 = <&sata_pwr>;
90 regulator-name = "usb_5v";
91 regulator-min-microvolt = <5000000>;
92 regulator-max-microvolt = <5000000>;
93 regulator-always-on;
94 vin-supply = <&vcc_stdby>;
97 vcc_sd: regulator-sdmmc {
98 compatible = "regulator-fixed";
100 pinctrl-names = "default";
101 pinctrl-0 = <&sdmmc_pwr>;
102 regulator-name = "vcc_sd";
103 regulator-min-microvolt = <3300000>;
104 regulator-max-microvolt = <3300000>;
105 startup-delay-us = <100000>;
106 vin-supply = <&vcc_io>;
109 vcc_host: regulator-usb-host {
110 compatible = "regulator-fixed";
111 enable-active-high;
113 pinctrl-names = "default";
114 pinctrl-0 = <&host_drv>;
115 regulator-name = "host-pwr";
116 regulator-min-microvolt = <5000000>;
117 regulator-max-microvolt = <5000000>;
118 regulator-always-on;
119 vin-supply = <&vcc_stdby>;
122 vcc_otg: regulator-usb-otg {
123 compatible = "regulator-fixed";
124 enable-active-high;
126 pinctrl-names = "default";
127 pinctrl-0 = <&otg_drv>;
128 regulator-name = "vcc_otg";
129 regulator-min-microvolt = <5000000>;
130 regulator-max-microvolt = <5000000>;
131 regulator-always-on;
132 vin-supply = <&vcc_stdby>;
137 cpu-supply = <&vdd_arm>;
141 cpu-supply = <&vdd_arm>;
146 phy-supply = <&vcc_rmii>;
147 pinctrl-names = "default";
148 pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
152 #address-cells = <1>;
153 #size-cells = <0>;
155 phy0: ethernet-phy@0 {
157 reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
163 bus-width = <8>;
164 cap-mmc-highspeed;
165 non-removable;
166 pinctrl-names = "default";
167 pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
168 vmmc-supply = <&vcc_emmc>;
169 vqmmc-supply = <&vcc_emmc>;
174 clock-frequency = <400000>;
178 compatible = "asahi-kasei,ak8975";
180 interrupt-parent = <&gpio4>;
182 pinctrl-names = "default";
183 pinctrl-0 = <&comp_int>;
189 interrupt-parent = <&gpio4>;
191 pinctrl-names = "default";
192 pinctrl-0 = <&gsensor_int>;
197 clock-frequency = <400000>;
204 gpio-controller;
205 #gpio-cells = <2>;
207 interrupt-parent = <&gpio6>;
210 interrupt-controller;
211 #interrupt-cells = <2>;
213 pinctrl-names = "default";
214 pinctrl-0 = <&pmic_int>, <&pwr_hold>;
216 vcc1-supply = <&vsys>;
217 vcc2-supply = <&vsys>;
218 vcc3-supply = <&vsys>;
219 vcc4-supply = <&vsys>;
220 vcc5-supply = <&vcc_io>;
221 vcc6-supply = <&vcc_io>;
222 vcc7-supply = <&vsys>;
223 vccio-supply = <&vsys>;
227 regulator-name = "vcc_rtc";
228 regulator-always-on;
232 regulator-name = "vcc_io";
233 regulator-min-microvolt = <3300000>;
234 regulator-max-microvolt = <3300000>;
235 regulator-always-on;
239 regulator-name = "vdd_arm";
240 regulator-min-microvolt = <600000>;
241 regulator-max-microvolt = <1500000>;
242 regulator-always-on;
243 regulator-boot-on;
247 regulator-name = "vcc_ddr";
248 regulator-min-microvolt = <600000>;
249 regulator-max-microvolt = <1500000>;
250 regulator-always-on;
251 regulator-boot-on;
255 regulator-name = "vcc18";
256 regulator-min-microvolt = <1800000>;
257 regulator-max-microvolt = <1800000>;
258 regulator-always-on;
262 regulator-name = "vdd_11";
263 regulator-min-microvolt = <1100000>;
264 regulator-max-microvolt = <1100000>;
265 regulator-always-on;
269 regulator-name = "vcc_25";
270 regulator-min-microvolt = <2500000>;
271 regulator-max-microvolt = <2500000>;
272 regulator-always-on;
276 regulator-name = "vccio_wl";
277 regulator-min-microvolt = <1800000>;
278 regulator-max-microvolt = <1800000>;
282 regulator-name = "vcc25_hdmi";
283 regulator-min-microvolt = <2500000>;
284 regulator-max-microvolt = <2500000>;
288 regulator-name = "vcca_33";
289 regulator-min-microvolt = <3300000>;
290 regulator-max-microvolt = <3300000>;
294 regulator-name = "vcc_rmii";
295 regulator-min-microvolt = <3300000>;
296 regulator-max-microvolt = <3300000>;
300 regulator-name = "vcc28_cif";
301 regulator-min-microvolt = <2800000>;
302 regulator-max-microvolt = <2800000>;
321 bus-width = <4>;
322 disable-wp;
323 pinctrl-names = "default";
324 pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
325 vmmc-supply = <&vcc_sd>;
326 cap-mmc-highspeed;
327 cap-sd-highspeed;
332 bus-width = <4>;
333 non-removable;
334 pinctrl-names = "default";
335 pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
336 vmmc-supply = <&vccio_wl>;
341 pcfg_output_high: pcfg-output-high {
342 output-high;
346 comp_int: comp-int {
352 rmii_rst: rmii-rst {
358 ir_int: ir-int {
364 pwr_key: pwr-key {
370 gsensor_int: gsensor-int {
376 sdmmc_pwr: sdmmc-pwr {
382 host_drv: host-drv {
386 hub_rst: hub-rst {
390 sata_pwr: sata-pwr {
394 sata_reset: sata-reset {
400 otg_drv: otg-drv {
406 pmic_int: pmic-int {
410 pwr_hold: pwr-hold {
429 vref-supply = <&vcc_25>;
438 pinctrl-names = "default";
439 pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
448 pinctrl-names = "default";
449 pinctrl-0 = <&uart3_xfer>, <&uart3_cts>, <&uart3_rts>;
454 pinctrl-names = "default";
455 pinctrl-0 = <&hub_rst>, <&sata_reset>;