Lines Matching +full:poll +full:- +full:interval
1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the RZN1D-DB Board
9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/net/pcs-rzn1-miic.h>
14 #include <dt-bindings/pinctrl/rzn1-pinctrl.h>
19 model = "RZN1D-DB Board";
20 compatible = "renesas,rzn1d400-db", "renesas,r9a06g032";
23 stdout-path = "serial0:115200n8";
31 compatible = "gpio-keys-polled";
32 poll-interval = <100>;
34 switch-1 {
36 label = "SW1-1";
37 debounce-interval = <20>;
41 switch-2 {
43 label = "SW1-2";
44 debounce-interval = <20>;
48 switch-3 {
50 label = "SW1-3";
51 debounce-interval = <20>;
55 switch-4 {
57 label = "SW1-4";
58 debounce-interval = <20>;
62 switch-5 {
64 label = "SW1-5";
65 debounce-interval = <20>;
69 switch-6 {
71 label = "SW1-6";
72 debounce-interval = <20>;
76 switch-7 {
78 label = "SW1-7";
79 debounce-interval = <20>;
83 switch-8 {
85 label = "SW1-8";
86 debounce-interval = <20>;
94 pinctrl-0 = <&pins_can0>;
95 pinctrl-names = "default";
102 pinctrl-0 = <&pins_can1>;
103 pinctrl-names = "default";
111 renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
116 phy-mode = "gmii";
118 fixed-link {
120 full-duplex;
125 pinctrl-0 = <&pins_i2c2>;
126 pinctrl-names = "default";
128 clock-frequency = <400000>;
133 gpio-controller;
134 #gpio-cells = <2>;
137 max4662-in1-hog {
138 gpio-hog;
140 output-high;
142 max4662-in2-hog {
143 gpio-hog;
145 output-low;
147 max4662-in3-hog {
148 gpio-hog;
150 output-low;
163 renesas,miic-input = <MIIC_SWITCH_PORTB>;
168 renesas,miic-input = <MIIC_SWITCH_PORTA>;
173 pinctrl-names = "default";
174 pinctrl-0 = <&pins_cpld>;
179 drive-strength = <6>;
185 drive-strength = <6>;
188 pins_cpld: pins-cpld {
208 drive-strength = <6>;
209 bias-disable;
225 drive-strength = <6>;
226 bias-disable;
232 drive-strength = <12>;
247 #address-cells = <1>;
248 #size-cells = <0>;
250 pinctrl-names = "default";
251 pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>;
256 clock-frequency = <2500000>;
258 #address-cells = <1>;
259 #size-cells = <0>;
261 switch0phy4: ethernet-phy@4 {
263 micrel,led-mode = <1>;
266 switch0phy5: ethernet-phy@5 {
268 micrel,led-mode = <1>;
275 phy-mode = "mii";
276 phy-handle = <&switch0phy5>;
282 phy-mode = "mii";
283 phy-handle = <&switch0phy4>;
300 timeout-sec = <60>;