Lines Matching +full:no +full:- +full:map
1 // SPDX-License-Identifier: BSD-3-Clause
7 * The .dts should first include qcom-msm8226.dtsi or msm8926.dtsi depending on
11 #include <dt-bindings/input/input.h>
14 /delete-node/ &adsp_region;
15 /delete-node/ &mba_region;
16 /delete-node/ &mpss_region;
17 /delete-node/ &smem_region;
27 #address-cells = <1>;
28 #size-cells = <1>;
31 stdout-path = "display0";
34 compatible = "simple-framebuffer";
43 gpio-hall-sensor {
44 compatible = "gpio-keys";
46 event-hall-sensor {
49 linux,input-type = <EV_SW>;
51 debounce-interval = <15>;
52 linux,can-disable;
53 wakeup-source;
57 gpio-keys {
58 compatible = "gpio-keys";
61 key-home {
65 debounce-interval = <15>;
68 key-volume-down {
72 debounce-interval = <15>;
75 key-volume-up {
79 debounce-interval = <15>;
83 i2c-backlight {
84 compatible = "i2c-gpio";
85 sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
86 scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
88 pinctrl-0 = <&backlight_i2c_default_state>;
89 pinctrl-names = "default";
91 i2c-gpio,delay-us = <4>;
93 #address-cells = <1>;
94 #size-cells = <0>;
100 dev-ctrl = /bits/ 8 <0x80>;
101 init-brt = /bits/ 8 <0x3f>;
104 pwm-names = "lp8556";
106 rom-a0h {
107 rom-addr = /bits/ 8 <0xa0>;
108 rom-val = /bits/ 8 <0x44>;
111 rom-a1h {
112 rom-addr = /bits/ 8 <0xa1>;
113 rom-val = /bits/ 8 <0x6c>;
116 rom-a5h {
117 rom-addr = /bits/ 8 <0xa5>;
118 rom-val = /bits/ 8 <0x24>;
124 compatible = "clk-pwm";
125 #pwm-cells = <2>;
127 pinctrl-0 = <&backlight_pwm_default_state>;
128 pinctrl-names = "default";
131 reg_tsp_1p8v: regulator-tsp-1p8v {
132 compatible = "regulator-fixed";
133 regulator-name = "tsp_1p8v";
134 regulator-min-microvolt = <1800000>;
135 regulator-max-microvolt = <1800000>;
138 enable-active-high;
140 pinctrl-names = "default";
141 pinctrl-0 = <&tsp_en_default_state>;
144 reserved-memory {
145 #address-cells = <1>;
146 #size-cells = <1>;
151 no-map;
156 no-map;
161 no-map;
166 no-map;
171 no-map;
176 no-map;
181 no-map;
186 no-map;
191 no-map;
196 no-map;
200 compatible = "qcom,rmtfs-mem";
202 no-map;
204 qcom,client-id = <1>;
216 muic: usb-switch@25 {
217 compatible = "siliconmitus,sm5502-muic";
220 interrupt-parent = <&tlmm>;
223 pinctrl-names = "default";
224 pinctrl-0 = <&muic_int_default_state>;
233 mx-supply = <&pm8226_l3>;
234 pll-supply = <&pm8226_l8>;
241 compatible = "qcom,rpm-pm8226-regulators";
244 regulator-min-microvolt = <1200000>;
245 regulator-max-microvolt = <1300000>;
249 regulator-min-microvolt = <1800000>;
250 regulator-max-microvolt = <2200000>;
254 regulator-min-microvolt = <1150000>;
255 regulator-max-microvolt = <1150000>;
259 regulator-min-microvolt = <1225000>;
260 regulator-max-microvolt = <1225000>;
264 regulator-min-microvolt = <1200000>;
265 regulator-max-microvolt = <1200000>;
269 regulator-min-microvolt = <750000>;
270 regulator-max-microvolt = <1350000>;
271 regulator-always-on;
275 regulator-min-microvolt = <1200000>;
276 regulator-max-microvolt = <1200000>;
280 regulator-min-microvolt = <1200000>;
281 regulator-max-microvolt = <1200000>;
285 regulator-min-microvolt = <1800000>;
286 regulator-max-microvolt = <1800000>;
287 regulator-always-on;
291 regulator-min-microvolt = <1850000>;
292 regulator-max-microvolt = <1850000>;
296 regulator-min-microvolt = <1800000>;
297 regulator-max-microvolt = <1800000>;
298 regulator-always-on;
302 regulator-min-microvolt = <2050000>;
303 regulator-max-microvolt = <2050000>;
307 regulator-min-microvolt = <1800000>;
308 regulator-max-microvolt = <1800000>;
312 regulator-min-microvolt = <1800000>;
313 regulator-max-microvolt = <1800000>;
317 regulator-min-microvolt = <2750000>;
318 regulator-max-microvolt = <2750000>;
322 regulator-min-microvolt = <1800000>;
323 regulator-max-microvolt = <3300000>;
327 regulator-min-microvolt = <3000000>;
328 regulator-max-microvolt = <3350000>;
332 regulator-min-microvolt = <2950000>;
333 regulator-max-microvolt = <2950000>;
335 regulator-system-load = <200000>;
336 regulator-allow-set-load;
337 regulator-always-on;
341 regulator-min-microvolt = <2950000>;
342 regulator-max-microvolt = <2950000>;
346 regulator-min-microvolt = <2850000>;
347 regulator-max-microvolt = <3000000>;
351 regulator-min-microvolt = <3075000>;
352 regulator-max-microvolt = <3075000>;
356 regulator-min-microvolt = <1800000>;
357 regulator-max-microvolt = <2950000>;
361 regulator-min-microvolt = <1800000>;
362 regulator-max-microvolt = <3000000>;
366 regulator-min-microvolt = <1800000>;
367 regulator-max-microvolt = <3300000>;
371 regulator-min-microvolt = <1300000>;
372 regulator-max-microvolt = <1350000>;
376 regulator-min-microvolt = <1775000>;
377 regulator-max-microvolt = <2125000>;
381 regulator-min-microvolt = <1225000>;
382 regulator-max-microvolt = <1300000>;
386 regulator-min-microvolt = <1800000>;
387 regulator-max-microvolt = <1800000>;
391 regulator-min-microvolt = <1800000>;
392 regulator-max-microvolt = <2950000>;
400 vmmc-supply = <&pm8226_l17>;
401 vqmmc-supply = <&pm8226_l6>;
403 bus-width = <8>;
404 non-removable;
410 vmmc-supply = <&pm8226_l18>;
411 vqmmc-supply = <&pm8226_l21>;
413 bus-width = <4>;
414 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
420 accel_int_default_state: accel-int-default-state {
423 drive-strength = <2>;
424 bias-disable;
427 backlight_i2c_default_state: backlight-i2c-default-state {
430 drive-strength = <2>;
431 bias-disable;
434 backlight_pwm_default_state: backlight-pwm-default-state {
439 muic_int_default_state: muic-int-default-state {
442 drive-strength = <2>;
443 bias-disable;
446 tsp_en_default_state: tsp-en-default-state {
449 drive-strength = <2>;
450 bias-disable;
453 tsp_int_rst_default_state: tsp-int-rst-default-state {
456 drive-strength = <10>;
457 bias-pull-up;
468 v1p8-supply = <&pm8226_l10>;
469 v3p3-supply = <&pm8226_l20>;