Lines Matching +full:v1p8 +full:- +full:supply
1 // SPDX-License-Identifier: BSD-3-Clause
3 * Common Board Device Tree for Microsoft MSM8x26-based Lumias
11 #include "qcom-msm8226.dtsi"
13 #include <dt-bindings/input/input.h>
19 /delete-node/ &smem_region;
29 #address-cells = <1>;
30 #size-cells = <1>;
33 stdout-path = "display0";
36 compatible = "simple-framebuffer";
49 power-domains = <&mmcc MDSS_GDSC>;
53 gpio_keys: gpio-keys {
54 compatible = "gpio-keys";
56 pinctrl-0 = <&gpio_keys_default>;
57 pinctrl-names = "default";
61 key-volume-up {
74 reserved-memory {
77 no-map;
82 no-map;
91 compatible = "asahi-kasei,ak09911";
94 vdd-supply = <&pm8226_l15>;
95 vid-supply = <&pm8226_l6>;
99 compatible = "kionix,kx022-1020";
102 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
104 vdd-supply = <&pm8226_l15>;
105 vddio-supply = <&pm8226_l6>;
107 mount-matrix = "1", "0", "0",
108 "0", "-1", "0",
117 compatible = "syna,rmi4-i2c";
120 interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
121 vdd-supply = <&pm8226_l15>;
122 vio-supply = <&pm8226_l6>;
124 pinctrl-0 = <&touchscreen_default>;
125 pinctrl-names = "default";
127 #address-cells = <1>;
128 #size-cells = <0>;
130 rmi4-f01@1 {
132 syna,nosleep-mode = <1>;
135 rmi4-f11@11 {
137 syna,sensor-type = <1>;
157 compatible = "qcom,rpm-pm8226-regulators";
161 regulator-min-microvolt = <1050000>;
162 regulator-max-microvolt = <1050000>;
166 regulator-min-microvolt = <1300000>;
167 regulator-max-microvolt = <1300000>;
171 regulator-min-microvolt = <1800000>;
172 regulator-max-microvolt = <2100000>;
176 regulator-min-microvolt = <1150000>;
177 regulator-max-microvolt = <1150000>;
181 regulator-min-microvolt = <750000>;
182 regulator-max-microvolt = <1150000>;
186 regulator-min-microvolt = <1200000>;
187 regulator-max-microvolt = <1200000>;
191 regulator-min-microvolt = <1200000>;
192 regulator-max-microvolt = <1200000>;
196 regulator-min-microvolt = <1800000>;
197 regulator-max-microvolt = <1800000>;
201 regulator-min-microvolt = <1850000>;
202 regulator-max-microvolt = <1850000>;
206 regulator-min-microvolt = <1800000>;
207 regulator-max-microvolt = <1800000>;
208 regulator-always-on;
212 regulator-min-microvolt = <2050000>;
213 regulator-max-microvolt = <2050000>;
217 regulator-min-microvolt = <1800000>;
218 regulator-max-microvolt = <1800000>;
222 regulator-min-microvolt = <1800000>;
223 regulator-max-microvolt = <1800000>;
227 regulator-min-microvolt = <2750000>;
228 regulator-max-microvolt = <2750000>;
232 regulator-min-microvolt = <2850000>;
233 regulator-max-microvolt = <2850000>;
237 regulator-min-microvolt = <3000000>;
238 regulator-max-microvolt = <3000000>;
242 regulator-min-microvolt = <2950000>;
243 regulator-max-microvolt = <2950000>;
244 regulator-system-load = <200000>;
245 regulator-allow-set-load;
249 regulator-min-microvolt = <2950000>;
250 regulator-max-microvolt = <2950000>;
251 regulator-system-load = <200000>;
252 regulator-allow-set-load;
256 regulator-min-microvolt = <2850000>;
257 regulator-max-microvolt = <2850000>;
261 regulator-min-microvolt = <3075000>;
262 regulator-max-microvolt = <3075000>;
266 regulator-min-microvolt = <1850000>;
267 regulator-max-microvolt = <2950000>;
271 regulator-min-microvolt = <1800000>;
272 regulator-max-microvolt = <1800000>;
276 regulator-min-microvolt = <1800000>;
277 regulator-max-microvolt = <1800000>;
281 regulator-min-microvolt = <1300000>;
282 regulator-max-microvolt = <1300000>;
286 regulator-min-microvolt = <1775000>;
287 regulator-max-microvolt = <2075000>;
291 regulator-min-microvolt = <2050000>;
292 regulator-max-microvolt = <2050000>;
296 regulator-min-microvolt = <2000000>;
297 regulator-max-microvolt = <3000000>;
303 vmmc-supply = <&pm8226_l17>;
304 vqmmc-supply = <&pm8226_l6>;
310 vmmc-supply = <&pm8226_l18>;
311 vqmmc-supply = <&pm8226_l21>;
329 v1p8-supply = <&pm8226_l10>;
330 v3p3-supply = <&pm8226_l20>;
334 gpio_keys_default: gpio-keys-default-state {
337 drive-strength = <2>;
338 bias-pull-up;
341 touchscreen_default: touchscreen-default-state {
342 irq-pins {
345 drive-strength = <8>;
346 bias-pull-up;
349 reset-pins {
352 drive-strength = <8>;
353 bias-disable;
354 output-high;