Lines Matching +full:min +full:- +full:system +full:- +full:microvolt
1 // SPDX-License-Identifier: BSD-3-Clause
3 * Common Board Device Tree for Microsoft MSM8x26-based Lumias
12 * The .dts should first include qcom-msm8226.dtsi or msm8926.dtsi depending on
17 #include <dt-bindings/input/input.h>
23 /delete-node/ &smem_region;
33 #address-cells = <1>;
34 #size-cells = <1>;
37 stdout-path = "display0";
40 compatible = "simple-framebuffer";
53 power-domains = <&mmcc MDSS_GDSC>;
57 gpio_keys: gpio-keys {
58 compatible = "gpio-keys";
60 pinctrl-0 = <&gpio_keys_default>;
61 pinctrl-names = "default";
65 key-volume-up {
78 reserved-memory {
81 no-map;
86 no-map;
95 compatible = "asahi-kasei,ak09911";
98 vdd-supply = <&pm8226_l15>;
99 vid-supply = <&pm8226_l6>;
103 compatible = "kionix,kx022-1020";
106 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>;
108 vdd-supply = <&pm8226_l15>;
109 vddio-supply = <&pm8226_l6>;
111 mount-matrix = "1", "0", "0",
112 "0", "-1", "0",
121 compatible = "syna,rmi4-i2c";
124 interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
125 vdd-supply = <&pm8226_l15>;
126 vio-supply = <&pm8226_l6>;
128 pinctrl-0 = <&touchscreen_default>;
129 pinctrl-names = "default";
131 #address-cells = <1>;
132 #size-cells = <0>;
134 rmi4-f01@1 {
136 syna,nosleep-mode = <1>;
139 rmi4-f11@11 {
141 syna,sensor-type = <1>;
161 compatible = "qcom,rpm-pm8226-regulators";
165 regulator-min-microvolt = <1050000>;
166 regulator-max-microvolt = <1050000>;
170 regulator-min-microvolt = <1300000>;
171 regulator-max-microvolt = <1300000>;
175 regulator-min-microvolt = <1800000>;
176 regulator-max-microvolt = <2100000>;
180 regulator-min-microvolt = <1150000>;
181 regulator-max-microvolt = <1150000>;
185 regulator-min-microvolt = <750000>;
186 regulator-max-microvolt = <1150000>;
190 regulator-min-microvolt = <1200000>;
191 regulator-max-microvolt = <1200000>;
195 regulator-min-microvolt = <1200000>;
196 regulator-max-microvolt = <1200000>;
200 regulator-min-microvolt = <1800000>;
201 regulator-max-microvolt = <1800000>;
205 regulator-min-microvolt = <1850000>;
206 regulator-max-microvolt = <1850000>;
210 regulator-min-microvolt = <1800000>;
211 regulator-max-microvolt = <1800000>;
212 regulator-always-on;
216 regulator-min-microvolt = <2050000>;
217 regulator-max-microvolt = <2050000>;
221 regulator-min-microvolt = <1800000>;
222 regulator-max-microvolt = <1800000>;
226 regulator-min-microvolt = <1800000>;
227 regulator-max-microvolt = <1800000>;
231 regulator-min-microvolt = <2750000>;
232 regulator-max-microvolt = <2750000>;
236 regulator-min-microvolt = <2850000>;
237 regulator-max-microvolt = <2850000>;
241 regulator-min-microvolt = <3000000>;
242 regulator-max-microvolt = <3000000>;
246 regulator-min-microvolt = <2950000>;
247 regulator-max-microvolt = <2950000>;
248 regulator-system-load = <200000>;
249 regulator-allow-set-load;
253 regulator-min-microvolt = <2950000>;
254 regulator-max-microvolt = <2950000>;
255 regulator-system-load = <200000>;
256 regulator-allow-set-load;
260 regulator-min-microvolt = <2850000>;
261 regulator-max-microvolt = <2850000>;
265 regulator-min-microvolt = <3075000>;
266 regulator-max-microvolt = <3075000>;
270 regulator-min-microvolt = <1850000>;
271 regulator-max-microvolt = <2950000>;
275 regulator-min-microvolt = <1800000>;
276 regulator-max-microvolt = <1800000>;
280 regulator-min-microvolt = <1800000>;
281 regulator-max-microvolt = <1800000>;
285 regulator-min-microvolt = <1300000>;
286 regulator-max-microvolt = <1300000>;
290 regulator-min-microvolt = <1775000>;
291 regulator-max-microvolt = <2075000>;
295 regulator-min-microvolt = <2050000>;
296 regulator-max-microvolt = <2050000>;
300 regulator-min-microvolt = <2000000>;
301 regulator-max-microvolt = <3000000>;
307 vmmc-supply = <&pm8226_l17>;
308 vqmmc-supply = <&pm8226_l6>;
314 vmmc-supply = <&pm8226_l18>;
315 vqmmc-supply = <&pm8226_l21>;
333 v1p8-supply = <&pm8226_l10>;
334 v3p3-supply = <&pm8226_l20>;
338 gpio_keys_default: gpio-keys-default-state {
341 drive-strength = <2>;
342 bias-pull-up;
345 touchscreen_default: touchscreen-default-state {
346 irq-pins {
349 drive-strength = <8>;
350 bias-pull-up;
353 reset-pins {
356 drive-strength = <8>;
357 bias-disable;
358 output-high;