Lines Matching +full:bias +full:- +full:pinconf
1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/gpio/gpio.h>
3 #include <dt-bindings/leds/common.h>
4 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
6 #include "qcom-apq8064-v2.0.dtsi"
12 compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
25 stdout-path = "serial0:115200n8";
29 compatible = "gpio-leds";
30 pinctrl-names = "default";
31 pinctrl-0 = <¬ify_led>;
33 led-user1 {
37 default-state = "on";
41 hdmi-out {
42 compatible = "hdmi-connector";
47 remote-endpoint = <&hdmi_out>;
52 sdcc4_pwrseq: pwrseq-sdcc4 {
53 pinctrl-names = "default";
54 pinctrl-0 = <&wlan_default_gpios>;
55 compatible = "mmc-pwrseq-simple";
56 reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
59 ext_3p3v: regulator-ext-3p3v {
60 compatible = "regulator-fixed";
61 regulator-min-microvolt = <3300000>;
62 regulator-max-microvolt = <3300000>;
63 regulator-name = "ext_3p3v";
64 startup-delay-us = <0>;
66 enable-active-high;
67 regulator-boot-on;
77 clock-frequency = <200000>;
101 /* CAM I2C MIPI-CSI connector */
112 num-cs = <1>;
113 cs-gpios = <&tlmm_pinmux 53 0>;
123 pinctrl-names = "default";
124 pinctrl-0 = <&gsbi6_uart_4pins>;
134 pinctrl-names = "default";
135 pinctrl-0 = <&gsbi7_uart_2pins>;
140 core-vdda-supply = <&pm8921_hdmi_switch>;
145 remote-endpoint = <&mdp_dtv_out>;
149 remote-endpoint = <&hdmi_con>;
154 core-vdda-supply = <&pm8921_hdmi_switch>;
162 remote-endpoint = <&hdmi_in>;
167 vdda-supply = <&pm8921_s3>;
168 vdda_phy-supply = <&pm8921_lvs6>;
169 vdda_refclk-supply = <&ext_3p3v>;
170 pinctrl-0 = <&pcie_pins>;
171 pinctrl-names = "default";
172 perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
176 interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
180 interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
184 wlan_default_gpios: wlan-gpios-state {
185 pinconf {
188 bias-disable;
189 power-source = <PM8921_GPIO_S4>;
193 notify_led: nled-state {
194 pinconf {
197 bias-disable;
198 power-source = <PM8921_GPIO_S4>;
205 compatible = "qcom,rpm-pm8921-regulators";
207 vin_lvs1_3_6-supply = <&pm8921_s4>;
208 vin_lvs2-supply = <&pm8921_s1>;
209 vin_lvs4_5_7-supply = <&pm8921_s4>;
211 vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
212 vdd_l24-supply = <&pm8921_s1>;
213 vdd_l25-supply = <&pm8921_s1>;
214 vdd_l26-supply = <&pm8921_s7>;
215 vdd_l27-supply = <&pm8921_s7>;
216 vdd_l28-supply = <&pm8921_s7>;
220 regulator-always-on;
221 regulator-min-microvolt = <1225000>;
222 regulator-max-microvolt = <1225000>;
223 qcom,switch-mode-frequency = <3200000>;
224 bias-pull-down;
228 regulator-min-microvolt = <1000000>;
229 regulator-max-microvolt = <1400000>;
230 qcom,switch-mode-frequency = <4800000>;
234 regulator-min-microvolt = <1800000>;
235 regulator-max-microvolt = <1800000>;
236 qcom,switch-mode-frequency = <3200000>;
240 regulator-min-microvolt = <1300000>;
241 regulator-max-microvolt = <1300000>;
242 qcom,switch-mode-frequency = <3200000>;
246 regulator-min-microvolt = <3050000>;
247 regulator-max-microvolt = <3300000>;
248 bias-pull-down;
252 regulator-min-microvolt = <1000000>;
253 regulator-max-microvolt = <1800000>;
254 bias-pull-down;
258 regulator-min-microvolt = <2750000>;
259 regulator-max-microvolt = <3000000>;
260 bias-pull-down;
264 regulator-min-microvolt = <2950000>;
265 regulator-max-microvolt = <2950000>;
266 bias-pull-down;
270 regulator-min-microvolt = <1700000>;
271 regulator-max-microvolt = <1900000>;
272 bias-pull-down;
276 bias-pull-down;
280 bias-pull-down;
283 pm8921_hdmi_switch: hdmi-switch {
284 bias-pull-down;
294 target-supply = <&pm8921_s4>;
300 vmmc-supply = <&pm8921_l5>;
301 vqmmc-supply = <&pm8921_s4>;
307 vmmc-supply = <&pm8921_l6>;
308 pinctrl-names = "default";
309 pinctrl-0 = <&card_detect>;
310 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
316 vmmc-supply = <&ext_3p3v>;
317 vqmmc-supply = <&pm8921_lvs1>;
318 mmc-pwrseq = <&sdcc4_pwrseq>;
323 card_detect: card-detect-state {
326 bias-disable;
329 pcie_pins: pcie-state {
332 drive-strength = <12>;
333 bias-disable;
338 v3p3-supply = <&pm8921_l3>;
339 v1p8-supply = <&pm8921_l4>;
343 v3p3-supply = <&pm8921_l3>;
344 v1p8-supply = <&pm8921_l23>;
348 v3p3-supply = <&pm8921_l3>;
349 v1p8-supply = <&pm8921_l23>;