Lines Matching +full:v1p8 +full:- +full:supply
1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/gpio/gpio.h>
3 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
5 #include "qcom-apq8064-v2.0.dtsi"
10 model = "CompuLab CM-QS600";
11 compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
18 stdout-path = "serial0:115200n8";
21 sdcc4_pwrseq: pwrseq-sdcc4 {
22 pinctrl-names = "default";
23 pinctrl-0 = <&wlan_default_gpios>;
24 compatible = "mmc-pwrseq-simple";
25 reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
28 /* on board fixed 3.3v supply */
29 v3p3_fixed: regulator-v3p3 {
30 compatible = "regulator-fixed";
31 regulator-name = "PCIE V3P3";
32 regulator-min-microvolt = <3300000>;
33 regulator-max-microvolt = <3300000>;
34 regulator-always-on;
44 clock-frequency = <200000>;
60 pinctrl-names = "default";
61 pinctrl-0 = <&gsbi7_uart_2pins>;
66 vdda-supply = <&pm8921_s3>;
67 vdda_phy-supply = <&pm8921_lvs6>;
68 vdda_refclk-supply = <&v3p3_fixed>;
69 pinctrl-0 = <&pcie_pins>;
70 pinctrl-names = "default";
71 perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
76 interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>;
80 interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>;
84 wlan_default_gpios: wlan-gpios-state {
88 bias-disable;
89 power-source = <PM8921_GPIO_S4>;
96 compatible = "qcom,rpm-pm8921-regulators";
98 vin_lvs1_3_6-supply = <&pm8921_s4>;
99 vin_lvs2-supply = <&pm8921_s1>;
100 vin_lvs4_5_7-supply = <&pm8921_s4>;
102 vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
103 vdd_l24-supply = <&pm8921_s1>;
104 vdd_l25-supply = <&pm8921_s1>;
105 vdd_l26-supply = <&pm8921_s7>;
106 vdd_l27-supply = <&pm8921_s7>;
107 vdd_l28-supply = <&pm8921_s7>;
111 regulator-always-on;
112 regulator-min-microvolt = <1225000>;
113 regulator-max-microvolt = <1225000>;
114 qcom,switch-mode-frequency = <3200000>;
115 bias-pull-down;
119 regulator-min-microvolt = <1000000>;
120 regulator-max-microvolt = <1400000>;
121 qcom,switch-mode-frequency = <4800000>;
125 regulator-min-microvolt = <1800000>;
126 regulator-max-microvolt = <1800000>;
127 qcom,switch-mode-frequency = <3200000>;
131 regulator-min-microvolt = <1300000>;
132 regulator-max-microvolt = <1300000>;
133 qcom,switch-mode-frequency = <3200000>;
137 regulator-min-microvolt = <3050000>;
138 regulator-max-microvolt = <3300000>;
139 bias-pull-down;
143 regulator-min-microvolt = <1000000>;
144 regulator-max-microvolt = <1800000>;
145 bias-pull-down;
149 regulator-min-microvolt = <2750000>;
150 regulator-max-microvolt = <3000000>;
151 bias-pull-down;
155 regulator-min-microvolt = <1700000>;
156 regulator-max-microvolt = <1900000>;
157 bias-pull-down;
161 bias-pull-down;
168 vmmc-supply = <&pm8921_l5>;
169 vqmmc-supply = <&pm8921_s4>;
175 vmmc-supply = <&v3p3_fixed>;
176 pinctrl-names = "default";
177 pinctrl-0 = <&card_detect>;
178 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
185 vmmc-supply = <&v3p3_fixed>;
186 vqmmc-supply = <&v3p3_fixed>;
187 mmc-pwrseq = <&sdcc4_pwrseq>;
191 card_detect: card-detect-state {
194 bias-disable;
197 pcie_pins: pcie-state {
200 drive-strength = <12>;
201 bias-disable;
206 v3p3-supply = <&pm8921_l3>;
207 v1p8-supply = <&pm8921_l4>;
211 v3p3-supply = <&pm8921_l3>;
212 v1p8-supply = <&pm8921_l23>;
216 v3p3-supply = <&pm8921_l3>;
217 v1p8-supply = <&pm8921_l23>;