Lines Matching +full:- +full:5000000
1 // SPDX-License-Identifier: GPL-2.0+
5 /dts-v1/;
10 compatible = "fsl,imx28-evk", "fsl,imx28";
18 reg_3p3v: regulator-3p3v {
19 compatible = "regulator-fixed";
20 regulator-name = "3P3V";
21 regulator-min-microvolt = <3300000>;
22 regulator-max-microvolt = <3300000>;
23 regulator-always-on;
26 reg_vddio_sd0: regulator-vddio-sd0 {
27 compatible = "regulator-fixed";
28 regulator-name = "vddio-sd0";
29 regulator-min-microvolt = <3300000>;
30 regulator-max-microvolt = <3300000>;
34 reg_fec_3v3: regulator-fec-3v3 {
35 compatible = "regulator-fixed";
36 regulator-name = "fec-3v3";
37 regulator-min-microvolt = <3300000>;
38 regulator-max-microvolt = <3300000>;
42 reg_usb0_vbus: regulator-usb0-vbus {
43 compatible = "regulator-fixed";
44 regulator-name = "usb0_vbus";
45 regulator-min-microvolt = <5000000>;
46 regulator-max-microvolt = <5000000>;
48 enable-active-high;
51 reg_usb1_vbus: regulator-usb1-vbus {
52 compatible = "regulator-fixed";
53 regulator-name = "usb1_vbus";
54 regulator-min-microvolt = <5000000>;
55 regulator-max-microvolt = <5000000>;
57 enable-active-high;
60 reg_lcd_3v3: regulator-lcd-3v3 {
61 compatible = "regulator-fixed";
62 regulator-name = "lcd-3v3";
63 regulator-min-microvolt = <3300000>;
64 regulator-max-microvolt = <3300000>;
66 enable-active-high;
69 reg_can_3v3: regulator-can-3v3 {
70 compatible = "regulator-fixed";
71 regulator-name = "can-3v3";
72 regulator-min-microvolt = <3300000>;
73 regulator-max-microvolt = <3300000>;
75 enable-active-high;
78 reg_lcd_5v: regulator-lcd-5v {
79 compatible = "regulator-fixed";
80 regulator-name = "lcd-5v";
81 regulator-min-microvolt = <5000000>;
82 regulator-max-microvolt = <5000000>;
88 dvdd-supply = <®_lcd_3v3>;
89 avdd-supply = <®_lcd_5v>;
93 remote-endpoint = <&display_out>;
99 compatible = "fsl,imx28-evk-sgtl5000",
100 "fsl,mxs-audio-sgtl5000";
101 model = "imx28-evk-sgtl5000";
102 saif-controllers = <&saif0 &saif1>;
103 audio-codec = <&sgtl5000>;
107 compatible = "gpio-leds";
108 pinctrl-names = "default";
109 pinctrl-0 = <&led_pin_gpio3_5>;
114 linux,default-trigger = "heartbeat";
119 compatible = "pwm-backlight";
120 pwms = <&pwm 2 5000000 0>;
121 brightness-levels = <0 4 8 16 32 64 128 255>;
122 default-brightness-level = <6>;
127 pinctrl-names = "default";
128 pinctrl-0 = <&auart0_pins_a>;
129 uart-has-rtscts;
134 pinctrl-names = "default";
135 pinctrl-0 = <&auart3_pins_a>;
140 pinctrl-names = "default";
141 pinctrl-0 = <&can0_pins_a>;
142 xceiver-supply = <®_can_3v3>;
147 pinctrl-names = "default";
148 pinctrl-0 = <&can1_pins_a>;
149 xceiver-supply = <®_can_3v3>;
154 pinctrl-names = "default";
155 pinctrl-0 = <&duart_pins_a>;
160 pinctrl-names = "default";
161 pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
167 pinctrl-names = "default";
168 pinctrl-0 = <&lcdif_24bit_pins_a
174 remote-endpoint = <&panel_in>;
180 fsl,lradc-touchscreen-wires = <4>;
181 fsl,ave-ctrl = <4>;
182 fsl,ave-delay = <2>;
188 pinctrl-names = "default";
189 pinctrl-0 = <&i2c0_pins_a>;
195 #sound-dai-cells = <0>;
196 VDDA-supply = <®_3p3v>;
197 VDDIO-supply = <®_3p3v>;
209 phy-mode = "rmii";
210 pinctrl-names = "default";
211 pinctrl-0 = <&mac0_pins_a>;
212 phy-supply = <®_fec_3v3>;
213 phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
214 phy-reset-duration = <100>;
219 phy-mode = "rmii";
220 pinctrl-names = "default";
221 pinctrl-0 = <&mac1_pins_a>;
226 pinctrl-names = "default";
227 pinctrl-0 = <&hog_pins_a>;
231 fsl,pinmux-ids = <
241 fsl,drive-strength = <MXS_DRIVE_4mA>;
243 fsl,pull-up = <MXS_PULL_DISABLE>;
248 fsl,pinmux-ids = <
251 fsl,drive-strength = <MXS_DRIVE_4mA>;
253 fsl,pull-up = <MXS_PULL_DISABLE>;
256 gpmi_pins_evk: gpmi-nand-evk@0 {
258 fsl,pinmux-ids = <
262 fsl,drive-strength = <MXS_DRIVE_4mA>;
264 fsl,pull-up = <MXS_PULL_DISABLE>;
267 lcdif_pins_evk: lcdif-evk@0 {
269 fsl,pinmux-ids = <
275 fsl,drive-strength = <MXS_DRIVE_4mA>;
277 fsl,pull-up = <MXS_PULL_DISABLE>;
282 pinctrl-names = "default";
283 pinctrl-0 = <&pwm2_pins_a>;
288 pinctrl-names = "default";
289 pinctrl-0 = <&saif0_pins_a>;
294 pinctrl-names = "default";
295 pinctrl-0 = <&saif1_pins_a>;
296 fsl,saif-master = <&saif0>;
301 compatible = "fsl,imx28-mmc";
302 pinctrl-names = "default";
303 pinctrl-0 = <&mmc0_8bit_pins_a
305 bus-width = <8>;
306 wp-gpios = <&gpio2 12 0>;
307 vmmc-supply = <®_vddio_sd0>;
312 compatible = "fsl,imx28-mmc";
313 bus-width = <8>;
314 wp-gpios = <&gpio0 28 0>;
318 #address-cells = <1>;
319 #size-cells = <0>;
320 compatible = "fsl,imx28-spi";
321 pinctrl-names = "default";
322 pinctrl-0 = <&spi2_pins_a>;
327 #address-cells = <1>;
328 #size-cells = <1>;
329 compatible = "sst,sst25vf016b", "jedec,spi-nor";
330 spi-max-frequency = <40000000>;
335 pinctrl-names = "default";
336 pinctrl-0 = <&usb0_id_pins_a>;
337 vbus-supply = <®_usb0_vbus>;
342 vbus-supply = <®_usb1_vbus>;