Lines Matching +full:imx23 +full:- +full:usbphy
1 // SPDX-License-Identifier: GPL-2.0+
5 /dts-v1/;
6 #include "imx23.dtsi"
10 compatible = "fsl,imx23-evk", "fsl,imx23";
17 reg_vddio_sd0: regulator-vddio-sd0 {
18 compatible = "regulator-fixed";
19 regulator-name = "vddio-sd0";
20 regulator-min-microvolt = <3300000>;
21 regulator-max-microvolt = <3300000>;
25 reg_lcd_3v3: regulator-lcd-3v3 {
26 compatible = "regulator-fixed";
27 regulator-name = "lcd-3v3";
28 regulator-min-microvolt = <3300000>;
29 regulator-max-microvolt = <3300000>;
31 enable-active-high;
34 reg_lcd_5v: regulator-lcd-5v {
35 compatible = "regulator-fixed";
36 regulator-name = "lcd-5v";
37 regulator-min-microvolt = <5000000>;
38 regulator-max-microvolt = <5000000>;
44 dvdd-supply = <®_lcd_3v3>;
45 avdd-supply = <®_lcd_5v>;
49 remote-endpoint = <&display_out>;
55 apbh-bus@80000000 {
56 nand-controller@8000c000 {
57 pinctrl-names = "default";
58 pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
63 compatible = "fsl,imx23-mmc";
64 pinctrl-names = "default";
65 pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
66 bus-width = <4>;
67 wp-gpios = <&gpio1 30 0>;
68 vmmc-supply = <®_vddio_sd0>;
73 pinctrl-names = "default";
74 pinctrl-0 = <&hog_pins_a>;
78 fsl,pinmux-ids = <
83 fsl,drive-strength = <MXS_DRIVE_4mA>;
85 fsl,pull-up = <MXS_PULL_DISABLE>;
90 pinctrl-names = "default";
91 pinctrl-0 = <&lcdif_24bit_pins_a>;
96 remote-endpoint = <&panel_in>;
102 apbx-bus@80040000 {
105 fsl,lradc-touchscreen-wires = <4>;
109 pinctrl-names = "default";
110 pinctrl-0 = <&pwm2_pins_a>;
115 pinctrl-names = "default";
116 pinctrl-0 = <&auart0_pins_a>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&duart_pins_a>;
126 usbphy0: usbphy@8007c000 {
139 compatible = "pwm-backlight";
141 brightness-levels = <0 4 8 16 32 64 128 255>;
142 default-brightness-level = <6>;