Lines Matching +full:imx6ul +full:- +full:iomuxc
2 * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
4 * This file is dual-licensed: you can use it either under the terms
42 /dts-v1/;
43 #include "imx6ul.dtsi"
44 #include "imx6ul-tx6ul.dtsi"
47 model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard";
48 compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
51 lcdif-24bit-pins-a = &pinctrl_disp0_3;
53 /delete-property/ mmc1;
57 /delete-node/ sound;
61 xceiver-supply = <®_3v3>;
65 xceiver-supply = <®_3v3>;
73 pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
74 /delete-node/ mdio;
78 pinctrl-names = "default";
79 pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
80 phy-mode = "rmii";
81 phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
82 phy-supply = <®_3v3_etn>;
83 phy-handle = <&etnphy1>;
87 #address-cells = <1>;
88 #size-cells = <0>;
90 etnphy0: ethernet-phy@0 {
91 compatible = "ethernet-phy-ieee802.3-c22";
93 pinctrl-names = "default";
94 pinctrl-0 = <&pinctrl_etnphy0_int>;
95 interrupt-parent = <&gpio5>;
97 interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
101 etnphy1: ethernet-phy@2 {
102 compatible = "ethernet-phy-ieee802.3-c22";
104 pinctrl-names = "default";
105 pinctrl-0 = <&pinctrl_etnphy1_int>;
106 interrupt-parent = <&gpio4>;
108 interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
119 /delete-node/ codec@a;
120 /delete-node/ touchscreen@48;
133 pinctrl-0 = <&pinctrl_disp0_3>;
141 pinctrl-0 = <&pinctrl_usdhc1>;
142 non-removable;
143 /delete-property/ cd-gpios;
144 cap-sdio-irq;
148 pinctrl-0 = <&pinctrl_uart1>;
149 /delete-property/ uart-has-rtscts;
153 pinctrl-0 = <&pinctrl_uart2>;
154 /delete-property/ uart-has-rtscts;
159 pinctrl-names = "default";
160 pinctrl-0 = <&pinctrl_uart3>;
165 pinctrl-names = "default";
166 pinctrl-0 = <&pinctrl_uart4>;
171 pinctrl-names = "default";
172 pinctrl-0 = <&pinctrl_uart5>;
177 pinctrl-names = "default";
178 pinctrl-0 = <&pinctrl_uart6>;
183 pinctrl-names = "default";
184 pinctrl-0 = <&pinctrl_uart7>;
189 pinctrl-names = "default";
190 pinctrl-0 = <&pinctrl_uart8>;
194 &iomuxc {
201 pinctrl_disp0_3: disp0-3-grp {
230 pinctrl_enet2_mdio: enet2-mdiogrp {