Lines Matching +full:edt +full:- +full:ft5x06
1 // SPDX-License-Identifier: GPL-2.0 OR MIT
9 #include <dt-bindings/gpio/gpio.h>
13 stdout-path = &uart1;
16 reg_2p5v: regulator-2p5v {
17 compatible = "regulator-fixed";
18 regulator-name = "2P5V";
19 regulator-min-microvolt = <2500000>;
20 regulator-max-microvolt = <2500000>;
21 regulator-always-on;
24 reg_3p3v: regulator-3p3v {
25 compatible = "regulator-fixed";
26 regulator-name = "3P3V";
27 regulator-min-microvolt = <3300000>;
28 regulator-max-microvolt = <3300000>;
29 regulator-always-on;
32 reg_1p8v: regulator-1p8v {
33 compatible = "regulator-fixed";
34 regulator-name = "1P8V";
35 regulator-min-microvolt = <1800000>;
36 regulator-max-microvolt = <1800000>;
37 regulator-always-on;
40 reg_1p5v: regulator-1p5v {
41 compatible = "regulator-fixed";
42 regulator-name = "1P5V";
43 regulator-min-microvolt = <1500000>;
44 regulator-max-microvolt = <1500000>;
45 regulator-always-on;
48 reg_2p8v: regulator-2p8v {
49 compatible = "regulator-fixed";
50 regulator-name = "2P8V";
51 regulator-min-microvolt = <2800000>;
52 regulator-max-microvolt = <2800000>;
53 regulator-always-on;
56 reg_usb_otg_vbus: regulator-usb-otg-vbus {
57 pinctrl-names = "default";
58 pinctrl-0 = <&pinctrl_usbotg_vbus>;
59 compatible = "regulator-fixed";
60 regulator-name = "usb_otg_vbus";
61 regulator-min-microvolt = <5000000>;
62 regulator-max-microvolt = <5000000>;
67 compatible = "fixed-clock";
68 #clock-cells = <0>;
69 clock-frequency = <24576000>;
73 compatible = "fsl,imx-audio-sgtl5000";
74 model = "imx6-pico-sgtl5000";
75 ssi-controller = <&ssi1>;
76 audio-codec = <&sgtl5000>;
77 audio-routing =
81 mux-int-port = <1>;
82 mux-ext-port = <3>;
86 compatible = "pwm-backlight";
88 brightness-levels = <0 36 72 108 144 180 216 255>;
89 default-brightness-level = <6>;
93 reg_lcd_3v3: regulator-lcd-3v3 {
94 compatible = "regulator-fixed";
95 pinctrl-names = "default";
96 pinctrl-0 = <&pinctrl_reg_lcd>;
97 regulator-name = "lcd-3v3";
98 regulator-min-microvolt = <3300000>;
99 regulator-max-microvolt = <3300000>;
101 enable-active-high;
105 compatible = "fsl,imx-parallel-display";
106 #address-cells = <1>;
107 #size-cells = <0>;
108 pinctrl-names = "default";
109 pinctrl-0 = <&pinctrl_ipu1>;
116 remote-endpoint = <&ipu1_di0_disp0>;
124 remote-endpoint = <&lcd_panel_in>;
130 compatible = "vxt,vl050-8048nt-c01";
132 power-supply = <®_lcd_3v3>;
136 remote-endpoint = <&lcd_display_out>;
143 pinctrl-names = "default";
144 pinctrl-0 = <&pinctrl_audmux>;
149 pinctrl-names = "default";
150 pinctrl-0 = <&pinctrl_flexcan1>;
155 pinctrl-names = "default";
156 pinctrl-0 = <&pinctrl_flexcan2>;
161 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
163 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
168 pinctrl-names = "default";
169 pinctrl-0 = <&pinctrl_ecspi2>;
170 cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
175 pinctrl-names = "default";
176 pinctrl-0 = <&pinctrl_enet>;
177 phy-mode = "rgmii-id";
178 phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
179 phy-handle = <&phy>;
183 #address-cells = <1>;
184 #size-cells = <0>;
186 phy: ethernet-phy@1 {
188 qca,clk-out-frequency = <125000000>;
194 ddc-i2c-bus = <&i2c2>;
199 pinctrl-names = "default";
200 pinctrl-0 = <&pinctrl_i2c1>;
203 sgtl5000: audio-codec@a {
204 #sound-dai-cells = <0>;
208 VDDA-supply = <®_2p5v>;
209 VDDIO-supply = <®_1p8v>;
214 clock-frequency = <100000>;
215 pinctrl-names = "default";
216 pinctrl-0 = <&pinctrl_i2c2>;
220 compatible = "edt,edt-ft5x06";
222 interrupt-parent = <&gpio5>;
224 reset-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
225 touchscreen-size-x = <800>;
226 touchscreen-size-y = <480>;
227 wakeup-source;
232 pinctrl-names = "default";
233 pinctrl-0 = <&pinctrl_ov5645>;
236 clock-frequency = <24000000>;
237 vdddo-supply = <®_1p8v>;
238 vdda-supply = <®_2p8v>;
239 vddd-supply = <®_1p5v>;
240 enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
241 reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
245 remote-endpoint = <&mipi_csi2_in>;
246 clock-lanes = <0>;
247 data-lanes = <1 2>;
254 pinctrl-names = "default";
255 pinctrl-0 = <&pinctrl_i2c3>;
260 remote-endpoint = <&lcd_display_in>;
270 remote-endpoint = <&ov5645_to_mipi_csi2>;
271 clock-lanes = <0>;
272 data-lanes = <1 2>;
278 pinctrl-names = "default";
279 pinctrl-0 = <&pinctrl_pcie_reset>;
280 reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
284 pinctrl-names = "default";
285 pinctrl-0 = <&pinctrl_pwm1>;
290 pinctrl-names = "default";
291 pinctrl-0 = <&pinctrl_pwm2>;
296 pinctrl-names = "default";
297 pinctrl-0 = <&pinctrl_pwm3>;
302 pinctrl-names = "default";
303 pinctrl-0 = <&pinctrl_pwm4>;
312 pinctrl-names = "default";
313 pinctrl-0 = <&pinctrl_uart1>;
318 pinctrl-names = "default";
319 pinctrl-0 = <&pinctrl_uart2>;
320 uart-has-rtscts;
325 pinctrl-names = "default";
326 pinctrl-0 = <&pinctrl_uart3>;
327 uart-has-rtscts;
336 vbus-supply = <®_usb_otg_vbus>;
337 pinctrl-names = "default";
338 pinctrl-0 = <&pinctrl_usbotg>;
339 disable-over-current;
345 pinctrl-names = "default";
346 pinctrl-0 = <&pinctrl_usdhc1>;
347 bus-width = <8>;
348 cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
353 pinctrl-names = "default";
354 pinctrl-0 = <&pinctrl_usdhc2>;
355 bus-width = <4>;
356 no-1-8-v;
357 keep-power-in-suspend;
358 non-removable;
363 pinctrl-names = "default";
364 pinctrl-0 = <&pinctrl_usdhc3>;
365 bus-width = <8>;
366 no-1-8-v;
367 non-removable;
372 pinctrl-names = "default";
373 pinctrl-0 = <&pinctrl_hog>;