Lines Matching +full:default +full:- +full:mode
1 // SPDX-License-Identifier: GPL-2.0
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/interrupt-controller/irq.h>
21 stdout-path = &uart2;
24 gpio-keys {
25 compatible = "gpio-keys";
27 user-pb {
33 user-pb1x {
36 interrupt-parent = <&gsc>;
40 key-erased {
41 label = "key-erased";
43 interrupt-parent = <&gsc>;
47 eeprom-wp {
50 interrupt-parent = <&gsc>;
57 interrupt-parent = <&gsc>;
61 switch-hold {
64 interrupt-parent = <&gsc>;
70 compatible = "gpio-leds";
71 pinctrl-names = "default";
72 pinctrl-0 = <&pinctrl_gpio_leds>;
74 led0: led-user1 {
77 default-state = "on";
78 linux,default-trigger = "heartbeat";
81 led1: led-user2 {
84 default-state = "off";
94 compatible = "pps-gpio";
95 pinctrl-names = "default";
96 pinctrl-0 = <&pinctrl_pps>;
101 reg_3p3v: regulator-3p3v {
102 compatible = "regulator-fixed";
103 regulator-name = "3P3V";
104 regulator-min-microvolt = <3300000>;
105 regulator-max-microvolt = <3300000>;
106 regulator-always-on;
109 reg_5p0v: regulator-5p0v {
110 compatible = "regulator-fixed";
111 regulator-name = "5P0V";
112 regulator-min-microvolt = <5000000>;
113 regulator-max-microvolt = <5000000>;
114 regulator-always-on;
119 pinctrl-names = "default";
120 pinctrl-0 = <&pinctrl_enet>;
121 phy-mode = "rgmii-id";
126 pinctrl-names = "default";
127 pinctrl-0 = <&pinctrl_gpmi_nand>;
132 clock-frequency = <100000>;
133 pinctrl-names = "default";
134 pinctrl-0 = <&pinctrl_i2c1>;
140 interrupt-parent = <&gpio1>;
142 interrupt-controller;
143 #interrupt-cells = <1>;
144 #size-cells = <0>;
147 compatible = "gw,gsc-adc";
148 #address-cells = <1>;
149 #size-cells = <0>;
152 gw,mode = <0>;
158 gw,mode = <3>;
164 gw,mode = <2>;
167 gw,voltage-divider-ohms = <22100 1000>;
168 gw,voltage-offset-microvolt = <800000>;
172 gw,mode = <2>;
175 gw,voltage-divider-ohms = <22100 10000>;
179 gw,mode = <2>;
182 gw,voltage-divider-ohms = <10000 10000>;
186 gw,mode = <2>;
189 gw,voltage-divider-ohms = <10000 10000>;
193 gw,mode = <2>;
199 gw,mode = <2>;
205 gw,mode = <2>;
211 gw,mode = <2>;
217 gw,mode = <2>;
223 gw,mode = <2>;
226 gw,voltage-divider-ohms = <10000 10000>;
230 gw,mode = <2>;
233 gw,voltage-divider-ohms = <10000 10000>;
241 gpio-controller;
242 #gpio-cells = <2>;
243 interrupt-parent = <&gsc>;
278 clock-frequency = <100000>;
279 pinctrl-names = "default";
280 pinctrl-0 = <&pinctrl_i2c2>;
285 clock-frequency = <100000>;
286 pinctrl-names = "default";
287 pinctrl-0 = <&pinctrl_i2c3>;
292 pinctrl-names = "default";
293 pinctrl-0 = <&pinctrl_pcie>;
294 reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
299 pinctrl-names = "default";
300 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
305 pinctrl-names = "default";
306 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
311 pinctrl-names = "default";
312 pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
317 pinctrl-names = "default";
318 pinctrl-0 = <&pinctrl_uart1>;
323 pinctrl-names = "default";
324 pinctrl-0 = <&pinctrl_uart2>;
329 pinctrl-names = "default";
330 pinctrl-0 = <&pinctrl_uart3>;
335 pinctrl-names = "default";
336 pinctrl-0 = <&pinctrl_uart5>;
341 pinctrl-names = "default";
342 pinctrl-0 = <&pinctrl_usbotg>;
343 disable-over-current;
352 pinctrl-names = "default";
353 pinctrl-0 = <&pinctrl_wdog>;
354 fsl,ext-reset-output;