Lines Matching +full:codec +full:- +full:gpio1
1 // SPDX-License-Identifier: GPL-2.0-or-later
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/interrupt-controller/irq.h>
27 compatible = "pwm-backlight";
29 brightness-levels = <0 4 8 16 32 64 128 255>;
30 default-brightness-level = <7>;
33 gpio-keys {
34 compatible = "gpio-keys";
36 user-pb {
42 user-pb1x {
45 interrupt-parent = <&gsc>;
49 key-erased {
50 label = "key-erased";
52 interrupt-parent = <&gsc>;
56 eeprom-wp {
59 interrupt-parent = <&gsc>;
66 interrupt-parent = <&gsc>;
70 switch-hold {
73 interrupt-parent = <&gsc>;
79 compatible = "gpio-leds";
80 pinctrl-names = "default";
81 pinctrl-0 = <&pinctrl_gpio_leds>;
83 led0: led-user1 {
86 default-state = "on";
87 linux,default-trigger = "heartbeat";
90 led1: led-user2 {
93 default-state = "off";
96 led2: led-user3 {
99 default-state = "off";
109 compatible = "pps-gpio";
110 pinctrl-names = "default";
111 pinctrl-0 = <&pinctrl_pps>;
112 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
116 reg_1p0v: regulator-1p0v {
117 compatible = "regulator-fixed";
118 regulator-name = "1P0V";
119 regulator-min-microvolt = <1000000>;
120 regulator-max-microvolt = <1000000>;
121 regulator-always-on;
124 reg_3p3v: regulator-3p3v {
125 compatible = "regulator-fixed";
126 regulator-name = "3P3V";
127 regulator-min-microvolt = <3300000>;
128 regulator-max-microvolt = <3300000>;
129 regulator-always-on;
132 reg_can1_stby: regulator-can1-stby {
133 compatible = "regulator-fixed";
134 pinctrl-names = "default";
135 pinctrl-0 = <&pinctrl_reg_can1>;
136 regulator-name = "can1_stby";
137 gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
138 regulator-min-microvolt = <3300000>;
139 regulator-max-microvolt = <3300000>;
142 reg_usb_h1_vbus: regulator-usb-h1-vbus {
143 compatible = "regulator-fixed";
144 regulator-name = "usb_h1_vbus";
145 regulator-min-microvolt = <5000000>;
146 regulator-max-microvolt = <5000000>;
147 regulator-always-on;
150 reg_usb_otg_vbus: regulator-usb-otg-vbus {
151 compatible = "regulator-fixed";
152 regulator-name = "usb_otg_vbus";
153 regulator-min-microvolt = <5000000>;
154 regulator-max-microvolt = <5000000>;
156 enable-active-high;
160 compatible = "fsl,imx6q-ventana-sgtl5000",
161 "fsl,imx-audio-sgtl5000";
162 model = "sgtl5000-audio";
163 ssi-controller = <&ssi1>;
164 audio-codec = <&codec>;
165 audio-routing =
169 mux-int-port = <1>;
170 mux-ext-port = <4>;
175 pinctrl-names = "default";
176 pinctrl-0 = <&pinctrl_audmux>;
181 pinctrl-names = "default";
182 pinctrl-0 = <&pinctrl_flexcan1>;
183 xceiver-supply = <®_can1_stby>;
188 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
190 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
195 pinctrl-names = "default";
196 pinctrl-0 = <&pinctrl_enet>;
197 phy-mode = "rgmii-id";
198 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
203 pinctrl-names = "default";
204 pinctrl-0 = <&pinctrl_gpmi_nand>;
209 ddc-i2c-bus = <&i2c3>;
214 clock-frequency = <100000>;
215 pinctrl-names = "default";
216 pinctrl-0 = <&pinctrl_i2c1>;
222 interrupt-parent = <&gpio1>;
224 interrupt-controller;
225 #interrupt-cells = <1>;
226 #size-cells = <0>;
229 compatible = "gw,gsc-adc";
230 #address-cells = <1>;
231 #size-cells = <0>;
322 gpio-controller;
323 #gpio-cells = <2>;
324 interrupt-parent = <&gsc>;
359 clock-frequency = <100000>;
360 pinctrl-names = "default";
361 pinctrl-0 = <&pinctrl_i2c2>;
367 interrupt-parent = <&gpio1>;
373 regulator-name = "vddsoc";
374 regulator-min-microvolt = <674400>;
375 regulator-max-microvolt = <1308000>;
376 lltc,fb-voltage-divider = <127000 200000>;
377 regulator-ramp-delay = <7000>;
378 regulator-boot-on;
379 regulator-always-on;
382 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
384 regulator-name = "vdd1p8";
385 regulator-min-microvolt = <1033310>;
386 regulator-max-microvolt = <2004000>;
387 lltc,fb-voltage-divider = <301000 200000>;
388 regulator-ramp-delay = <7000>;
389 regulator-boot-on;
390 regulator-always-on;
395 regulator-name = "vddarm";
396 regulator-min-microvolt = <674400>;
397 regulator-max-microvolt = <1308000>;
398 lltc,fb-voltage-divider = <127000 200000>;
399 regulator-ramp-delay = <7000>;
400 regulator-boot-on;
401 regulator-always-on;
406 regulator-name = "vddddr";
407 regulator-min-microvolt = <868310>;
408 regulator-max-microvolt = <1684000>;
409 lltc,fb-voltage-divider = <221000 200000>;
410 regulator-ramp-delay = <7000>;
411 regulator-boot-on;
412 regulator-always-on;
415 /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
417 regulator-name = "vdd2p5";
418 regulator-min-microvolt = <2490375>;
419 regulator-max-microvolt = <2490375>;
420 lltc,fb-voltage-divider = <487000 200000>;
421 regulator-boot-on;
422 regulator-always-on;
425 /* VDD_AUD_1P8: Audio codec */
427 regulator-name = "vdd1p8a";
428 regulator-min-microvolt = <1800000>;
429 regulator-max-microvolt = <1800000>;
430 regulator-boot-on;
435 regulator-name = "vdd3p0";
436 regulator-min-microvolt = <3023250>;
437 regulator-max-microvolt = <3023250>;
438 lltc,fb-voltage-divider = <634000 200000>;
439 regulator-boot-on;
440 regulator-always-on;
447 clock-frequency = <100000>;
448 pinctrl-names = "default";
449 pinctrl-0 = <&pinctrl_i2c3>;
452 codec: sgtl5000@a { label
455 #sound-dai-cells = <0>;
457 VDDA-supply = <®_1p8v>;
458 VDDIO-supply = <®_3p3v>;
464 interrupt-parent = <&gpio1>;
466 wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
478 lvds-channel@0 {
479 fsl,data-mapping = "spwg";
480 fsl,data-width = <18>;
483 display-timings {
484 native-mode = <&timing0>;
485 timing0: timing-hsd100pxn1 {
486 clock-frequency = <65000000>;
489 hback-porch = <220>;
490 hfront-porch = <40>;
491 vback-porch = <21>;
492 vfront-porch = <7>;
493 hsync-len = <60>;
494 vsync-len = <10>;
501 pinctrl-names = "default";
502 pinctrl-0 = <&pinctrl_pcie>;
503 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
508 pinctrl-names = "default";
509 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
514 pinctrl-names = "default";
515 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
520 pinctrl-names = "default";
521 pinctrl-0 = <&pinctrl_pwm4>;
530 pinctrl-names = "default";
531 pinctrl-0 = <&pinctrl_uart1>;
532 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
537 pinctrl-names = "default";
538 pinctrl-0 = <&pinctrl_uart2>;
543 pinctrl-names = "default";
544 pinctrl-0 = <&pinctrl_uart5>;
549 vbus-supply = <®_usb_otg_vbus>;
550 pinctrl-names = "default";
551 pinctrl-0 = <&pinctrl_usbotg>;
552 disable-over-current;
557 vbus-supply = <®_usb_h1_vbus>;
562 pinctrl-names = "default", "state_100mhz", "state_200mhz";
563 pinctrl-0 = <&pinctrl_usdhc3>;
564 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
565 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
566 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
567 vmmc-supply = <®_3p3v>;
568 no-1-8-v; /* firmware will remove if board revision supports */
573 pinctrl-names = "default";
574 pinctrl-0 = <&pinctrl_wdog>;
575 fsl,ext-reset-output;
753 pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
766 pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {