Lines Matching +full:imx6q +full:- +full:iomuxc
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include "imx6q-ba16.dtsi"
9 model = "Advantech DMS-BA16";
10 compatible = "advantech,imx6q-dms-ba16", "advantech,imx6q-ba16", "fsl,imx6q";
12 reg_usb_otg_vbus: regulator-usbotgvbus {
13 compatible = "regulator-fixed";
14 regulator-name = "usb_otg_vbus";
15 regulator-min-microvolt = <5000000>;
16 regulator-max-microvolt = <5000000>;
17 pinctrl-names = "default";
18 pinctrl-0 = <&pinctrl_usbotgvbus>;
20 enable-active-high;
23 sys_mclk: clock-sys-mclk {
24 compatible = "fixed-clock";
25 #clock-cells = <0>;
26 clock-frequency = <22000000>;
30 compatible = "fsl,imx6q-ba16-sgtl5000",
31 "fsl,imx-audio-sgtl5000";
32 model = "imx6q-ba16-sgtl5000";
33 ssi-controller = <&ssi1>;
34 audio-codec = <&sgtl5000>;
35 audio-routing =
39 mux-int-port = <1>;
40 mux-ext-port = <4>;
45 cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
46 pinctrl-names = "default";
47 pinctrl-0 = <&pinctrl_ecspi5>;
52 spi-max-frequency = <20000000>;
56 address-width = <16>;
60 &iomuxc {
91 clock-frequency = <100000>;
92 pinctrl-names = "default";
93 pinctrl-0 = <&pinctrl_i2c1>;
99 #sound-dai-cells = <0>;
101 lrclk-strength = <0x3>;
102 VDDA-supply = <®_1p8v>;
103 VDDIO-supply = <®_3p3v>;
108 pinctrl-names = "default";
109 pinctrl-0 = <&pinctrl_pwm2>;
114 fsl,no-spread-spectrum;
115 fsl,transmit-atten-16ths = <12>;
116 fsl,transmit-boost-mdB = <3330>;
117 fsl,transmit-level-mV = <1133>;
118 fsl,receive-dpll-mode = <1>;
123 vbus-supply = <®_usb_otg_vbus>;
124 pinctrl-names = "default";
125 pinctrl-0 = <&pinctrl_usbotg>;
127 disable-over-current;
132 pinctrl-names = "default";
133 pinctrl-0 = <&pinctrl_usdhc4>;
134 bus-width = <8>;
135 cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
136 no-1-8-v;
137 keep-power-in-suspend;
138 wakeup-source;