Lines Matching +full:oversampling +full:- +full:ratio
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
6 /dts-v1/;
8 #include "imx6qdl-prti6q.dtsi"
9 #include <dt-bindings/display/sdtv-standards.h>
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/leds/common.h>
12 #include <dt-bindings/sound/fsl-imx-audmux.h>
23 backlight_lcd: backlight-lcd {
24 compatible = "pwm-backlight";
26 brightness-levels = <0 20 81 248 1000>;
27 default-brightness-level = <65>;
28 num-interpolated-steps = <21>;
29 power-supply = <®_bl_12v0>;
33 compatible = "fsl,imx-parallel-display";
34 pinctrl-0 = <&pinctrl_ipu1_disp>;
35 pinctrl-names = "default";
36 #address-cells = <1>;
37 #size-cells = <0>;
43 remote-endpoint = <&ipu1_di0_disp0>;
51 remote-endpoint = <&panel_in>;
56 iio-hwmon {
57 compatible = "iio-hwmon";
58 io-channels = <&vdiv_vaccu>;
62 compatible = "gpio-keys";
65 key-esc {
71 key-up {
77 key-down {
83 key-enter {
89 key-cycle {
95 key-f1 {
101 key-f2 {
107 key-f3 {
113 key-f4 {
119 key-f5 {
125 key-f6 {
131 key-f7 {
137 key-f8 {
143 key-f9 {
149 key-f10 {
157 compatible = "gpio-leds";
158 pinctrl-names = "default";
159 pinctrl-0 = <&pinctrl_leds>;
161 led-debug0 {
164 linux,default-trigger = "heartbeat";
169 compatible = "innolux,g070y2-t02";
171 power-supply = <®_3v3>;
175 remote-endpoint = <&display_out>;
181 compatible = "composite-video-connector";
183 sdtv-standards = <SDTV_STD_PAL_B>;
187 remote-endpoint = <&tvp5150_comp0_in>;
192 reg_bl_12v0: regulator-bl-12v0 {
193 compatible = "regulator-fixed";
194 pinctrl-names = "default";
195 pinctrl-0 = <&pinctrl_reg_bl_12v0>;
196 regulator-name = "bl-12v0";
197 regulator-min-microvolt = <12000000>;
198 regulator-max-microvolt = <12000000>;
200 enable-active-high;
203 reg_3v3: regulator-3v3 {
204 compatible = "regulator-fixed";
205 regulator-name = "3v3";
206 regulator-min-microvolt = <3300000>;
207 regulator-max-microvolt = <3300000>;
210 reg_1v8: regulator-1v8 {
211 compatible = "regulator-fixed";
212 regulator-name = "1v8";
213 regulator-min-microvolt = <1800000>;
214 regulator-max-microvolt = <1800000>;
218 compatible = "simple-audio-card";
219 simple-audio-card,name = "prti6q-sgtl5000";
220 simple-audio-card,format = "i2s";
221 simple-audio-card,widgets =
226 simple-audio-card,routing =
232 simple-audio-card,cpu {
233 sound-dai = <&ssi1>;
234 system-clock-frequency = <0>;
237 simple-audio-card,codec {
238 sound-dai = <&sgtl5000>;
239 bitclock-master;
240 frame-master;
244 thermal-zones {
245 chassis-thermal {
246 polling-delay = <20000>;
247 polling-delay-passive = <0>;
248 thermal-sensors = <&tsens0>;
259 touch-thermal0 {
260 polling-delay = <20000>;
261 polling-delay-passive = <0>;
262 thermal-sensors = <&touch_temp0>;
273 touch-thermal1 {
274 polling-delay = <20000>;
275 polling-delay-passive = <0>;
276 thermal-sensors = <&touch_temp1>;
289 compatible = "resistive-adc-touch";
290 io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
292 io-channel-names = "y", "z1", "z2", "x";
293 touchscreen-min-pressure = <64687>;
294 touchscreen-x-plate-ohms = <300>;
295 touchscreen-y-plate-ohms = <800>;
298 touch_temp0: touch-temperature-sensor0 {
299 compatible = "generic-adc-thermal";
300 #thermal-sensor-cells = <0>;
301 io-channels = <&adc_ts 0>;
302 io-channel-names = "sensor-channel";
303 temperature-lookup-table = < (-40000) 736
307 touch_temp1: touch-temperature-sensor1 {
308 compatible = "generic-adc-thermal";
309 #thermal-sensor-cells = <0>;
310 io-channels = <&adc_ts 7>;
311 io-channel-names = "sensor-channel";
312 temperature-lookup-table = < (-40000) 826
316 vdiv_vaccu: voltage-divider-vaccu {
317 compatible = "voltage-divider";
318 io-channels = <&adc_ts 2>;
319 output-ohms = <2500>;
320 full-ohms = <64000>;
321 #io-channel-cells = <0>;
326 pinctrl-names = "default";
327 pinctrl-0 = <&pinctrl_audmux>;
330 mux-ssi1 {
331 fsl,audmux-port = <0>;
332 fsl,port-config = <
341 mux-pins3 {
342 fsl,audmux-port = <2>;
343 fsl,port-config = <
351 pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
355 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
356 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
360 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
361 pinctrl-names = "default";
362 pinctrl-0 = <&pinctrl_ecspi2>;
366 compatible = "ti,tsc2046e-adc";
368 pinctrl-0 = <&pinctrl_tsc>;
369 pinctrl-names = "default";
370 spi-max-frequency = <1000000>;
371 interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
372 #io-channel-cells = <1>;
374 #address-cells = <1>;
375 #size-cells = <0>;
379 settling-time-us = <700>;
380 oversampling-ratio = <5>;
385 settling-time-us = <700>;
386 oversampling-ratio = <5>;
391 settling-time-us = <700>;
392 oversampling-ratio = <5>;
397 settling-time-us = <700>;
398 oversampling-ratio = <5>;
404 sgtl5000: audio-codec@a {
407 pinctrl-names = "default";
408 pinctrl-0 = <&pinctrl_codec>;
409 #sound-dai-cells = <0>;
411 VDDA-supply = <®_3v3>;
412 VDDIO-supply = <®_3v3>;
413 VDDD-supply = <®_1v8>;
420 #address-cells = <1>;
421 #size-cells = <0>;
427 remote-endpoint = <&comp0_out>;
436 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
448 tsens0: temperature-sensor@70 {
451 #thermal-sensor-cells = <0>;
457 interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
458 #gpio-cells = <2>;
459 gpio-controller;
464 pinctrl-names = "default";
465 pinctrl-0 = <&pinctrl_ipu1_csi0>;
470 remote-endpoint = <&display_in>;
474 remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
478 pinctrl-names = "default";
479 pinctrl-0 = <&pinctrl_pwm1>;