Lines Matching +full:tx +full:- +full:pins
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC
9 #include <dt-bindings/clock/at91.h>
10 #include <dt-bindings/dma/at91.h>
11 #include <dt-bindings/mfd/at91-usart.h>
12 #include <dt-bindings/pinctrl/at91.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
14 #include <dt-bindings/gpio/gpio.h>
17 #address-cells = <1>;
18 #size-cells = <1>;
21 interrupt-parent = <&aic>;
46 #address-cells = <1>;
47 #size-cells = <0>;
51 compatible = "arm,cortex-a5";
53 next-level-cache = <&L2>;
64 compatible = "fixed-clock";
65 #clock-cells = <0>;
66 clock-frequency = <0>;
70 compatible = "fixed-clock";
71 #clock-cells = <0>;
72 clock-frequency = <0>;
76 compatible = "fixed-clock";
77 #clock-cells = <0>;
78 clock-frequency = <1000000>;
83 compatible = "mmio-sram";
85 #address-cells = <1>;
86 #size-cells = <1>;
91 compatible = "simple-bus";
92 #address-cells = <1>;
93 #size-cells = <1>;
97 compatible = "mmio-sram";
98 no-memory-wc;
100 #address-cells = <1>;
101 #size-cells = <1>;
106 compatible = "microchip,sama5d4-vdec";
113 compatible = "atmel,sama5d3-udc";
118 clock-names = "pclk", "hclk";
123 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
127 clock-names = "ohci_clk", "hclk", "uhpck";
132 compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
136 clock-names = "usb_clk", "ehci_clk";
140 L2: cache-controller@a00000 {
141 compatible = "arm,pl310-cache";
144 cache-unified;
145 cache-level = <2>;
149 compatible = "atmel,sama5d3-ebi";
150 #address-cells = <2>;
151 #size-cells = <1>;
162 nand_controller: nand-controller {
163 compatible = "atmel,sama5d3-nand-controller";
164 atmel,nfc-sram = <&nfc_sram>;
165 atmel,nfc-io = <&nfc_io>;
166 ecc-engine = <&pmecc>;
167 #address-cells = <2>;
168 #size-cells = <1>;
174 nfc_io: nfc-io@90000000 {
175 compatible = "atmel,sama5d3-nfc-io", "syscon";
180 compatible = "simple-bus";
181 #address-cells = <1>;
182 #size-cells = <1>;
186 compatible = "atmel,sama5d4-hlcdc";
190 clock-names = "periph_clk","sys_clk", "slow_clk";
193 hlcdc-display-controller {
194 compatible = "atmel,hlcdc-display-controller";
195 #address-cells = <1>;
196 #size-cells = <0>;
199 #address-cells = <1>;
200 #size-cells = <0>;
205 hlcdc_pwm: hlcdc-pwm {
206 compatible = "atmel,hlcdc-pwm";
207 pinctrl-names = "default";
208 pinctrl-0 = <&pinctrl_lcd_pwm>;
209 #pwm-cells = <3>;
213 dma1: dma-controller@f0004000 {
214 compatible = "atmel,sama5d4-dma";
217 #dma-cells = <1>;
219 clock-names = "dma_clk";
223 compatible = "atmel,at91sam9g45-isi";
226 pinctrl-names = "default";
227 pinctrl-0 = <&pinctrl_isi_data_0_7>;
229 clock-names = "isi_clk";
232 #address-cells = <1>;
233 #size-cells = <0>;
238 compatible = "atmel,sama5d3-ddramc";
241 clock-names = "ddrck", "mpddr";
244 dma0: dma-controller@f0014000 {
245 compatible = "atmel,sama5d4-dma";
248 #dma-cells = <1>;
250 clock-names = "dma_clk";
253 pmc: clock-controller@f0018000 {
254 compatible = "atmel,sama5d4-pmc", "syscon";
257 #clock-cells = <2>;
259 clock-names = "slow_clk", "main_xtal";
269 dma-names = "rxtx";
270 pinctrl-names = "default";
271 pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>;
273 #address-cells = <1>;
274 #size-cells = <0>;
276 clock-names = "mci_clk";
280 compatible = "atmel,at91sam9260-usart";
282 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
290 dma-names = "tx", "rx";
291 pinctrl-names = "default";
292 pinctrl-0 = <&pinctrl_uart0>;
294 clock-names = "usart";
299 compatible = "atmel,at91sam9g45-ssc";
302 pinctrl-names = "default";
303 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
310 dma-names = "tx", "rx";
312 clock-names = "pclk";
317 compatible = "atmel,sama5d3-pwm";
320 #pwm-cells = <3>;
326 #address-cells = <1>;
327 #size-cells = <0>;
328 compatible = "atmel,at91rm9200-spi";
337 dma-names = "tx", "rx";
338 pinctrl-names = "default";
339 pinctrl-0 = <&pinctrl_spi0>;
341 clock-names = "spi_clk";
346 compatible = "atmel,sama5d4-i2c";
355 dma-names = "tx", "rx";
356 pinctrl-names = "default", "gpio";
357 pinctrl-0 = <&pinctrl_i2c0>;
358 pinctrl-1 = <&pinctrl_i2c0_gpio>;
359 sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
360 scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
361 #address-cells = <1>;
362 #size-cells = <0>;
368 compatible = "atmel,sama5d4-i2c";
377 dma-names = "tx", "rx";
378 pinctrl-names = "default", "gpio";
379 pinctrl-0 = <&pinctrl_i2c1>;
380 pinctrl-1 = <&pinctrl_i2c1_gpio>;
381 sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
382 scl-gpios = <&pioE 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
383 #address-cells = <1>;
384 #size-cells = <0>;
390 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
391 #address-cells = <1>;
392 #size-cells = <0>;
396 clock-names = "t0_clk", "slow_clk";
400 compatible = "atmel,sama5d4-gem";
403 pinctrl-names = "default";
404 pinctrl-0 = <&pinctrl_macb0_rmii>;
405 #address-cells = <1>;
406 #size-cells = <0>;
408 clock-names = "hclk", "pclk";
413 compatible = "atmel,sama5d4-i2c";
422 dma-names = "tx", "rx";
423 pinctrl-names = "default", "gpio";
424 pinctrl-0 = <&pinctrl_i2c2>;
425 pinctrl-1 = <&pinctrl_i2c2_gpio>;
426 sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>;
427 scl-gpios = <&pioB 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
428 #address-cells = <1>;
429 #size-cells = <0>;
435 compatible = "atmel,sama5d4-sfr", "syscon";
440 compatible = "atmel,at91sam9260-usart";
442 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
450 dma-names = "tx", "rx";
451 pinctrl-names = "default";
452 pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
454 clock-names = "usart";
459 compatible = "atmel,at91sam9260-usart";
461 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
469 dma-names = "tx", "rx";
470 pinctrl-names = "default";
471 pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
473 clock-names = "usart";
484 dma-names = "rxtx";
485 pinctrl-names = "default";
486 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
488 #address-cells = <1>;
489 #size-cells = <0>;
491 clock-names = "mci_clk";
495 compatible = "atmel,at91sam9260-usart";
497 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
505 dma-names = "tx", "rx";
506 pinctrl-names = "default";
507 pinctrl-0 = <&pinctrl_uart1>;
509 clock-names = "usart";
514 compatible = "atmel,at91sam9260-usart";
516 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
524 dma-names = "tx", "rx";
525 pinctrl-names = "default";
526 pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
528 clock-names = "usart";
533 compatible = "atmel,at91sam9260-usart";
535 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
543 dma-names = "tx", "rx";
544 pinctrl-names = "default";
545 pinctrl-0 = <&pinctrl_usart3>;
547 clock-names = "usart";
552 compatible = "atmel,at91sam9260-usart";
554 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
562 dma-names = "tx", "rx";
563 pinctrl-names = "default";
564 pinctrl-0 = <&pinctrl_usart4>;
566 clock-names = "usart";
571 compatible = "atmel,at91sam9g45-ssc";
574 pinctrl-names = "default";
575 pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
582 dma-names = "tx", "rx";
584 clock-names = "pclk";
589 #address-cells = <1>;
590 #size-cells = <0>;
591 compatible = "atmel,at91rm9200-spi";
600 dma-names = "tx", "rx";
601 pinctrl-names = "default";
602 pinctrl-0 = <&pinctrl_spi1>;
604 clock-names = "spi_clk";
609 #address-cells = <1>;
610 #size-cells = <0>;
611 compatible = "atmel,at91rm9200-spi";
620 dma-names = "tx", "rx";
621 pinctrl-names = "default";
622 pinctrl-0 = <&pinctrl_spi2>;
624 clock-names = "spi_clk";
629 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
630 #address-cells = <1>;
631 #size-cells = <0>;
635 clock-names = "t0_clk", "slow_clk";
639 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
640 #address-cells = <1>;
641 #size-cells = <0>;
645 clock-names = "t0_clk", "slow_clk";
649 compatible = "atmel,sama5d4-gem";
652 pinctrl-names = "default";
653 pinctrl-0 = <&pinctrl_macb1_rmii>;
654 #address-cells = <1>;
655 #size-cells = <0>;
657 clock-names = "hclk", "pclk";
662 compatible = "atmel,at91sam9g45-trng";
669 compatible = "atmel,at91sam9x5-adc";
674 clock-names = "adc_clk", "adc_op_clk";
675 atmel,adc-channels-used = <0x01f>;
676 atmel,adc-startup-time = <40>;
677 atmel,adc-use-external-triggers;
678 atmel,adc-vref = <3000>;
679 atmel,adc-sample-hold-time = <11>;
680 atmel,adc-ts-pressure-threshold = <10000>;
685 compatible = "atmel,at91sam9g46-aes";
692 dma-names = "tx", "rx";
694 clock-names = "aes_clk";
698 compatible = "atmel,at91sam9g46-tdes";
705 dma-names = "tx", "rx";
707 clock-names = "tdes_clk";
711 compatible = "atmel,at91sam9g46-sha";
716 dma-names = "tx";
718 clock-names = "sha_clk";
722 compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
726 #address-cells = <1>;
727 #size-cells = <1>;
730 pmecc: ecc-engine@ffffc070 {
731 compatible = "atmel,sama5d4-pmecc";
737 reset_controller: reset-controller@fc068600 {
738 compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
744 compatible = "atmel,at91sam9x5-shdwc";
750 compatible = "atmel,at91sam9260-pit";
757 compatible = "atmel,sama5d4-wdt";
764 clk32k: clock-controller@fc068650 {
765 compatible = "atmel,sama5d4-sckc";
767 #clock-cells = <0>;
772 compatible = "atmel,sama5d4-rtc";
779 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
781 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
783 pinctrl-names = "default";
784 pinctrl-0 = <&pinctrl_dbgu>;
786 clock-names = "usart";
792 #address-cells = <1>;
793 #size-cells = <1>;
794 compatible = "atmel,sama5d3-pinctrl", "simple-mfd";
798 atmel,mux-mask = <
808 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
811 #gpio-cells = <2>;
812 gpio-controller;
813 interrupt-controller;
814 #interrupt-cells = <2>;
819 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
822 #gpio-cells = <2>;
823 gpio-controller;
824 interrupt-controller;
825 #interrupt-cells = <2>;
830 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
833 #gpio-cells = <2>;
834 gpio-controller;
835 interrupt-controller;
836 #interrupt-cells = <2>;
841 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
844 #gpio-cells = <2>;
845 gpio-controller;
846 interrupt-controller;
847 #interrupt-cells = <2>;
852 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
855 #gpio-cells = <2>;
856 gpio-controller;
857 interrupt-controller;
858 #interrupt-cells = <2>;
865 atmel,pins =
869 atmel,pins =
873 atmel,pins =
877 atmel,pins =
881 atmel,pins =
885 atmel,pins =
891 pinctrl_dbgu: dbgu-0 {
892 atmel,pins =
899 pinctrl_ebi_addr: ebi-addr-0 {
900 atmel,pins =
929 pinctrl_ebi_nand_addr: ebi-addr-1 {
930 atmel,pins =
935 pinctrl_ebi_cs0: ebi-cs0-0 {
936 atmel,pins =
940 pinctrl_ebi_cs1: ebi-cs1-0 {
941 atmel,pins =
945 pinctrl_ebi_cs2: ebi-cs2-0 {
946 atmel,pins =
950 pinctrl_ebi_cs3: ebi-cs3-0 {
951 atmel,pins =
955 pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
956 atmel,pins =
967 pinctrl_ebi_data_8_15: ebi-data-msb-0 {
968 atmel,pins =
979 pinctrl_ebi_nandrdy: ebi-nandrdy-0 {
980 atmel,pins =
984 pinctrl_ebi_nrd_nandoe: ebi-nrd-nandoe-0 {
985 atmel,pins =
989 pinctrl_ebi_nwait: ebi-nwait-0 {
990 atmel,pins =
994 pinctrl_ebi_nwe_nandwe: ebi-nwe-nandwe-0 {
995 atmel,pins =
999 pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 {
1000 atmel,pins =
1006 pinctrl_i2c0: i2c0-0 {
1007 atmel,pins =
1012 pinctrl_i2c0_gpio: i2c0-gpio {
1013 atmel,pins =
1020 pinctrl_i2c1: i2c1-0 {
1021 atmel,pins =
1023 AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* TWCK1, conflicts with UART0 TX and DIBN */
1026 pinctrl_i2c1_gpio: i2c1-gpio {
1027 atmel,pins =
1034 pinctrl_i2c2: i2c2-0 {
1035 atmel,pins =
1040 pinctrl_i2c2_gpio: i2c2-gpio {
1041 atmel,pins =
1048 pinctrl_isi_data_0_7: isi-0-data-0-7 {
1049 atmel,pins =
1062 pinctrl_isi_data_8_9: isi-0-data-8-9 {
1063 atmel,pins =
1067 pinctrl_isi_data_10_11: isi-0-data-10-11 {
1068 atmel,pins =
1075 pinctrl_lcd_base: lcd-base-0 {
1076 atmel,pins =
1082 pinctrl_lcd_pwm: lcd-pwm-0 {
1083 atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */
1085 pinctrl_lcd_rgb444: lcd-rgb-0 {
1086 atmel,pins =
1100 pinctrl_lcd_rgb565: lcd-rgb-1 {
1101 atmel,pins =
1119 pinctrl_lcd_rgb666: lcd-rgb-2 {
1120 atmel,pins =
1140 pinctrl_lcd_rgb777: lcd-rgb-3 {
1141 atmel,pins =
1167 pinctrl_lcd_rgb888: lcd-rgb-4 {
1168 atmel,pins =
1197 pinctrl_macb0_rmii: macb0_rmii-0 {
1198 atmel,pins =
1214 pinctrl_macb1_rmii: macb1_rmii-0 {
1215 atmel,pins =
1232 atmel,pins =
1239 atmel,pins =
1246 atmel,pins =
1257 atmel,pins =
1264 atmel,pins =
1273 pinctrl_nand: nand-0 {
1274 atmel,pins =
1295 pinctrl_spi0: spi0-0 {
1296 atmel,pins =
1306 atmel,pins =
1313 atmel,pins =
1322 atmel,pins =
1329 atmel,pins =
1337 pinctrl_spi1: spi1-0 {
1338 atmel,pins =
1347 pinctrl_spi2: spi2-0 {
1348 atmel,pins =
1357 pinctrl_uart0: uart0-0 {
1358 atmel,pins =
1366 pinctrl_uart1: uart1-0 {
1367 atmel,pins =
1375 pinctrl_usart0: usart0-0 {
1376 atmel,pins =
1381 pinctrl_usart0_rts: usart0_rts-0 {
1382 atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
1384 pinctrl_usart0_cts: usart0_cts-0 {
1385 atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
1390 pinctrl_usart1: usart1-0 {
1391 atmel,pins =
1396 pinctrl_usart1_rts: usart1_rts-0 {
1397 atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
1399 pinctrl_usart1_cts: usart1_cts-0 {
1400 atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
1405 pinctrl_usart2: usart2-0 {
1406 atmel,pins =
1407 <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* RXD - conflicts with G0_CRS, ISI_HSYNC */
1408 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE /* TXD - conflicts with G0_COL, PCK2 */
1411 pinctrl_usart2_rts: usart2_rts-0 {
1412 … atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with G0_RX3, PWMH1 */
1414 pinctrl_usart2_cts: usart2_cts-0 {
1415 …atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with G0_TXER, ISI_VSYNC */
1420 pinctrl_usart3: usart3-0 {
1421 atmel,pins =
1429 pinctrl_usart4: usart4-0 {
1430 atmel,pins =
1435 pinctrl_usart4_rts: usart4_rts-0 {
1436 atmel,pins = <AT91_PIOE 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with NWAIT, A19 */
1438 pinctrl_usart4_cts: usart4_cts-0 {
1439 … atmel,pins = <AT91_PIOE 0 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with A0/NBS0, MCI0_CDB */
1444 aic: interrupt-controller@fc06e000 {
1445 #interrupt-cells = <3>;
1446 compatible = "atmel,sama5d4-aic";
1447 interrupt-controller;
1449 atmel,external-irqs = <56>;