Lines Matching +full:serial +full:- +full:leds

1 // SPDX-License-Identifier: GPL-2.0-or-later
6 /dts-v1/;
7 #include "at91-sama5d4_ma5d4.dtsi"
14 		stdout-path = "serial3:115200n8";
19 			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
20 			pinctrl-names = "default";
21 			pinctrl-0 = <&pinctrl_usba_vbus>;
26 			num-ports = <3>;
27 			atmel,vbus-gpio = <0
42 				hlcdc-display-controller {
43 					pinctrl-names = "default";
44 					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
49 							remote-endpoint = <&panel_input>;
57 				phy-mode = "rmii";
60 				phy0: ethernet-phy@0 {
65 			usart0: serial@f802c000 {
69 			usart1: serial@f8030000 {
74 				pinctrl-names = "default";
75 				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
76 				vmmc-supply = <&vcc_mmc1_reg>;
77 				vqmmc-supply = <&vcc_3v3_reg>;
81 					bus-width = <4>;
82 					cd-gpios = <&pioE 5 0>;
87 				atmel,adc-ts-wires = <4>;
88 				atmel,adc-ts-pressure-threshold = <10000>;
107 		compatible = "pwm-backlight";
109 		brightness-levels = <0 4 8 16 32 64 128 255>;
110 		default-brightness-level = <6>;
114 	leds {
115 		compatible = "gpio-leds";
118 		led-user1 {
121 			linux,default-trigger = "heartbeat";
124 		led-user2 {
127 			linux,default-trigger = "heartbeat";
130 		led-user3 {
133 			linux,default-trigger = "heartbeat";
139 		compatible = "foxlink,fl500wvr00-a0t";
141 		#address-cells = <1>;
142 		#size-cells = <0>;
146 			#address-cells = <1>;
147 			#size-cells = <0>;
151 				remote-endpoint = <&hlcdc_panel_output>;
157 		compatible = "regulator-fixed";
159 		regulator-name = "VDD MCI1";
160 		regulator-min-microvolt = <3300000>;
161 		regulator-max-microvolt = <3300000>;
162 		vin-supply = <&vcc_3v3_reg>;