Lines Matching +full:pinmux +full:- +full:id

1 // SPDX-License-Identifier: GPL-2.0
3  * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board
11 /dts-v1/;
12 #include "at91-kizbox3_common.dtsi"
15 	model = "Overkiz KIZBOX3-HS";
16 	compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5";
18 	led-controller-1 {
21 		led-1 {
25 		led-2 {
29 		led-3 {
33 		led-4 {
38 	led-controller-2  {
39 		compatible = "gpio-leds";
40 		pinctrl-names = "default";
41 		pinctrl-0 = <&pinctrl_led_red
45 		led-5 {
48 			default-state = "off";
51 		led-6 {
54 			default-state = "off";
58 	gpio-keys {
59 		compatible = "gpio-keys";
60 		pinctrl-names = "default" , "default", "default",
62 		pinctrl-0 = <&pinctrl_key_gpio_default>;
63 		pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>;
64 		pinctrl-2 = <&pinctrl_pio_io_boot
67 		pinctrl-3 = <&pinctrl_pio_zbe_test_radio
69 		pinctrl-4 = <&pinctrl_pio_input>;
71 		switch-1 {
75 			wakeup-source;
78 		switch-2 {
82 			wakeup-source;
85 		switch-3 {
89 			wakeup-source;
92 		switch-7 {
96 			wakeup-source;
99 		switch-8 {
103 			wakeup-source;
115 			init-low;
122 			init-low;
129 			init-low;
136 			init-low;
143 			init-low;
150 			init-low;
157 			init-low;
164 			init-low;
180 			label = "id usba";
189 		pinmux = <PIN_PA22__GPIO>,
194 		bias-disable;
199 			pinmux = <PIN_PC19__GPIO>;
200 			bias-disable;
203 			pinmux = <PIN_PC20__GPIO>;
204 			bias-disable;
207 			pinmux =
210 			bias-disable;
213 			pinmux = <PIN_PC9__GPIO>;
214 			bias-disable;
217 			pinmux = <PIN_PB21__GPIO>;
218 			bias-disable;
221 			pinmux = <PIN_PB25__GPIO>;
222 			bias-disable;
226 			pinmux = <PIN_PB30__GPIO>;
227 			bias-disable;
228 			drive-open-drain;
229 			output-low;
232 			pinmux =
236 			bias-disable;
242 			pinmux = <PIN_PB1__GPIO>;
243 			bias-disable;
246 			pinmux = <PIN_PB8__GPIO>;
247 			bias-disable;