Lines Matching +full:pinmux +full:- +full:id
1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
14 compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
22 compatible = "mediatek,mt2701-cs42448-machine";
25 audio-routing =
42 mediatek,audio-codec = <&cs42448>;
43 mediatek,audio-codec-bt-mrg = <&bt_sco_codec>;
44 pinctrl-names = "default";
45 pinctrl-0 = <&aud_pins_default>;
46 i2s1-in-sel-gpio1 = <&pio 53 0>;
47 i2s1-in-sel-gpio2 = <&pio 54 0>;
52 compatible = "linux,bt-sco";
56 compatible = "pwm-backlight";
58 brightness-levels = <
63 default-brightness-level = <9>;
67 compatible = "regulator-fixed";
68 regulator-name = "usb_vbus";
69 regulator-min-microvolt = <5000000>;
70 regulator-max-microvolt = <5000000>;
72 enable-active-high;
82 pinctrl-names = "default";
83 pinctrl-0 = <&pwm_bls_gpio>;
87 pinctrl-names = "default";
88 pinctrl-0 = <&i2c0_pins_a>;
93 pinctrl-names = "default";
94 pinctrl-0 = <&i2c1_pins_a>;
99 pinctrl-names = "default";
100 pinctrl-0 = <&i2c2_pins_a>;
106 clock-names = "mclk";
113 pinmux = <MT2701_PIN_75_SDA0__FUNC_SDA0>,
115 bias-disable;
121 pinmux = <MT2701_PIN_57_SDA1__FUNC_SDA1>,
123 bias-disable;
129 pinmux = <MT2701_PIN_77_SDA2__FUNC_SDA2>,
131 bias-disable;
137 pinmux = <MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM>;
143 pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>,
147 bias-disable;
153 pinmux = <MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA>,
171 drive-strength = <MTK_DRIVE_12mA>;
172 bias-pull-down;
178 pinmux = <MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS>,
182 bias-disable;
188 pinmux = <MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS>,
192 bias-disable;
198 pinctrl-names = "default";
199 pinctrl-0 = <&spi_pins_a>;
204 pinctrl-names = "default";
205 pinctrl-0 = <&spi_pins_b>;
210 pinctrl-names = "default";
211 pinctrl-0 = <&spi_pins_c>;
216 pinctrl-names = "default";
217 pinctrl-0 = <&nor_pins_default>;
220 compatible = "jedec,spi-nor";
228 pinmux = <MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS>,
234 drive-strength = <4>;
235 bias-pull-up;
246 usb-role-switch;
248 compatible = "gpio-usb-b-connector", "usb-b-connector";
250 id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
251 vbus-supply = <&usb_vbus>;