Lines Matching +full:pcie +full:- +full:phy1
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 * (DB-88F6820)
8 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
11 /dts-v1/;
12 #include "armada-388.dtsi"
16 compatible = "marvell,a385-db", "marvell,armada388",
20 stdout-path = "serial0:115200n8";
35 internal-regs {
38 clock-frequency = <100000>;
39 audio_codec: audio-codec@4a {
40 #sound-dai-cells = <0>;
48 clock-frequency = <100000>;
57 phy = <&phy1>;
58 phy-mode = "rgmii-id";
59 buffer-manager = <&bm>;
60 bm,pool-long = <2>;
61 bm,pool-short = <3>;
71 phy-mode = "rgmii-id";
72 buffer-manager = <&bm>;
73 bm,pool-long = <0>;
74 bm,pool-short = <1>;
78 phy0: ethernet-phy@0 {
82 phy1: ethernet-phy@1 { label
100 broken-cd;
101 wp-inverted;
102 bus-width = <8>;
104 no-1-8-v;
107 audio-controller@e8000 {
108 pinctrl-0 = <&i2s_pins>;
109 pinctrl-names = "default";
122 bm-bppi {
126 pcie {
129 * The two PCIe units are accessible through
130 * standard PCIe slots on the board.
132 pcie@1,0 {
136 pcie@2,0 {
144 compatible = "simple-audio-card";
145 simple-audio-card,name = "Armada 385 DB Audio";
146 simple-audio-card,mclk-fs = <256>;
147 simple-audio-card,widgets =
150 simple-audio-card,routing =
157 simple-audio-card,dai-link@0 {
160 sound-dai = <&audio_controller 0>;
164 sound-dai = <&audio_codec>;
168 simple-audio-card,dai-link@1 {
171 sound-dai = <&audio_controller 1>;
175 sound-dai = <&spdif_out>;
179 simple-audio-card,dai-link@2 {
182 sound-dai = <&audio_controller 1>;
186 sound-dai = <&spdif_in>;
191 spdif_out: spdif-out {
192 #sound-dai-cells = <0>;
193 compatible = "linux,spdif-dit";
196 spdif_in: spdif-in {
197 #sound-dai-cells = <0>;
198 compatible = "linux,spdif-dir";
206 #address-cells = <1>;
207 #size-cells = <1>;
208 compatible = "w25q32", "jedec,spi-nor";
210 spi-max-frequency = <108000000>;
219 label = "pxa3xx_nand-0";
220 nand-rb = <0>;
221 marvell,nand-keep-config;
222 nand-on-flash-bbt;
223 nand-ecc-strength = <4>;
224 nand-ecc-step-size = <512>;
227 compatible = "fixed-partitions";
228 #address-cells = <1>;
229 #size-cells = <1>;
232 label = "U-Boot";