Lines Matching +full:led +full:- +full:usb +full:- +full:mode

1 // SPDX-License-Identifier: GPL-2.0
3  * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
12  * TODO: add support for the white SATA LED.
15 #include "armada-370.dtsi"
16 #include <dt-bindings/gpio/gpio.h>
17 #include <dt-bindings/input/input.h>
21 		stdout-path = "serial0:115200n8";
33 		internal-regs {
34 			coherency-fabric@20200 {
35 				broken-idle;
44 				pinctrl-0 = <&ge1_rgmii_pins>;
45 				pinctrl-names = "default";
47 				phy-mode = "rgmii-id";
50 			usb@50000 {
56 	regulator-0 {
57 		compatible = "regulator-fixed";
58 		regulator-name = "USB Power";
59 		regulator-min-microvolt = <5000000>;
60 		regulator-max-microvolt = <5000000>;
61 		regulator-always-on;
62 		regulator-boot-on;
66 	regulator-1 {
67 		compatible = "regulator-fixed";
68 		regulator-name = "SATA0 power";
69 		regulator-min-microvolt = <5000000>;
70 		regulator-max-microvolt = <5000000>;
71 		enable-active-high;
72 		regulator-always-on;
73 		regulator-boot-on;
77 	gpio-keys {
78 		compatible = "gpio-keys";
80 		button-power {
84 			debounce-interval = <100>;
86 		button-reset {
90 			debounce-interval = <100>;
92 		button-usb {
93 			label = "USB VBUS error";
96 			debounce-interval = <100>;
100 	gpio-leds {
101 		compatible = "gpio-leds";
103 		led-red-sata0 {
106 			default-state = "off";
111 		compatible = "gpio-poweroff";
119 	/* USB 3.0 Bridge ASM1042A */
126 	pinctrl-0 = <&mdio_pins>;
127 	pinctrl-names = "default";
129 	phy0: ethernet-phy@0 {
135 	pinctrl-0 = <&sata_led_pin>;
136 	pinctrl-names = "default";
138 	sata_led_pin: sata-led-pin {
142 	gpio_led_pin: gpio-led-pin {
150 	pinctrl-0 = <&spi0_pins2>;
151 	pinctrl-names = "default";
154 		#address-cells = <1>;
155 		#size-cells = <1>;
157 		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
159 		spi-max-frequency = <50000000>;
162 			label = "u-boot";