Lines Matching +full:0 +full:x00000000 +full:- +full:0 +full:x03ffffff
1 // SPDX-License-Identifier: GPL-2.0
6 #include <dt-bindings/interrupt-controller/irq.h>
7 #include <dt-bindings/clock/cortina,gemini-clock.h>
8 #include <dt-bindings/reset/cortina,gemini-reset.h>
9 #include <dt-bindings/gpio/gpio.h>
13 #address-cells = <1>;
14 #size-cells = <1>;
16 compatible = "simple-bus";
17 interrupt-parent = <&intcon>;
20 compatible = "cortina,gemini-flash", "cfi-flash";
22 pinctrl-names = "default";
23 pinctrl-0 = <&pflash_default_pins>;
24 bank-width = <2>;
29 compatible = "cortina,gemini-syscon",
30 "syscon", "simple-mfd";
31 reg = <0x40000000 0x1000>;
32 #clock-cells = <1>;
33 #reset-cells = <1>;
35 syscon-reboot {
36 compatible = "syscon-reboot";
39 offset = <0x0c>;
41 mask = <0xC0000000>;
45 compatible = "cortina,gemini-pinctrl";
48 pinctrl-names = "default";
49 pinctrl-0 = <&dram_default_pins>, <&system_default_pins>,
52 dram_default_pins: pinctrl-dram {
58 rtc_default_pins: pinctrl-rtc {
64 power_default_pins: pinctrl-power {
70 cir_default_pins: pinctrl-cir {
76 system_default_pins: pinctrl-system {
82 vcontrol_default_pins: pinctrl-vcontrol {
88 ice_default_pins: pinctrl-ice {
94 uart_default_pins: pinctrl-uart {
100 pflash_default_pins: pinctrl-pflash {
106 usb_default_pins: pinctrl-usb {
112 gmii_default_pins: pinctrl-gmii {
125 pci_default_pins: pinctrl-pci {
131 sata_default_pins: pinctrl-sata {
138 sata_and_ide_pins: pinctrl-sata-ide {
148 tvc_default_pins: pinctrl-tvc {
158 compatible = "cortina,gemini-watchdog", "faraday,ftwdt010";
159 reg = <0x41000000 0x1000>;
163 clock-names = "PCLK";
168 reg = <0x42000000 0x100>;
172 pinctrl-names = "default";
173 pinctrl-0 = <&uart_default_pins>;
174 reg-shift = <2>;
179 reg = <0x43000000 0x1000>;
180 interrupt-parent = <&intcon>;
187 clock-names = "PCLK", "EXTCLK";
192 compatible = "cortina,gemini-rtc", "faraday,ftrtc010";
193 reg = <0x45000000 0x100>;
197 clock-names = "PCLK", "EXTCLK";
198 pinctrl-names = "default";
199 pinctrl-0 = <&rtc_default_pins>;
203 compatible = "cortina,gemini-sata-bridge";
204 reg = <0x46000000 0x100>;
207 reset-names = "sata0", "sata1";
210 clock-names = "SATA0_PCLK", "SATA1_PCLK";
216 pinctrl-names = "default", "ide";
217 pinctrl-0 = <&sata_default_pins>;
218 pinctrl-1 = <&sata_and_ide_pins>;
223 intcon: interrupt-controller@48000000 {
225 reg = <0x48000000 0x1000>;
227 interrupt-controller;
228 #interrupt-cells = <2>;
231 power-controller@4b000000 {
232 compatible = "cortina,gemini-power-controller";
233 reg = <0x4b000000 0x100>;
235 pinctrl-names = "default";
236 pinctrl-0 = <&power_default_pins>;
240 compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
241 reg = <0x4d000000 0x100>;
245 gpio-controller;
246 #gpio-cells = <2>;
247 interrupt-controller;
248 #interrupt-cells = <2>;
252 compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
253 reg = <0x4e000000 0x100>;
257 gpio-controller;
258 #gpio-cells = <2>;
259 interrupt-controller;
260 #interrupt-cells = <2>;
264 compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
265 reg = <0x4f000000 0x100>;
269 gpio-controller;
270 #gpio-cells = <2>;
271 interrupt-controller;
272 #interrupt-cells = <2>;
276 compatible = "cortina,gemini-pci", "faraday,ftpci100";
281 reg = <0x50000000 0x100>;
284 clock-names = "PCLK", "PCICLK";
285 pinctrl-names = "default";
286 pinctrl-0 = <&pci_default_pins>;
288 #address-cells = <3>;
289 #size-cells = <2>;
292 #interrupt-cells = <1>;
293 interrupt-map-mask = <0xf800 0 0 7>;
294 interrupt-map =
295 <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
296 <0x4800 0 0 2 &pci_intc 1>,
297 <0x4800 0 0 3 &pci_intc 2>,
298 <0x4800 0 0 4 &pci_intc 3>,
299 <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
300 <0x5000 0 0 2 &pci_intc 2>,
301 <0x5000 0 0 3 &pci_intc 3>,
302 <0x5000 0 0 4 &pci_intc 0>,
303 <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
304 <0x5800 0 0 2 &pci_intc 3>,
305 <0x5800 0 0 3 &pci_intc 0>,
306 <0x5800 0 0 4 &pci_intc 1>,
307 <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
308 <0x6000 0 0 2 &pci_intc 0>,
309 <0x6000 0 0 3 &pci_intc 1>,
310 <0x6000 0 0 4 &pci_intc 2>;
312 bus-range = <0x00 0xff>;
315 /* 1MiB I/O space 0x50000000-0x500fffff */
316 <0x01000000 0 0 0x50000000 0 0x00100000>,
317 /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
318 <0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
321 dma-ranges =
322 /* 128MiB at 0x00000000-0x07ffffff */
323 <0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
324 /* 64MiB at 0x00000000-0x03ffffff */
325 <0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
326 /* 64MiB at 0x00000000-0x03ffffff */
327 <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
333 pci_intc: interrupt-controller {
334 interrupt-parent = <&intcon>;
336 interrupt-controller;
337 #address-cells = <0>;
338 #interrupt-cells = <1>;
343 compatible = "cortina,gemini-ethernet";
344 reg = <0x60000000 0x4000>, /* Global registers, queue */
345 <0x60004000 0x2000>, /* V-bit */
346 <0x60006000 0x2000>; /* A-bit */
347 pinctrl-names = "default";
348 pinctrl-0 = <&gmii_default_pins>;
350 #address-cells = <1>;
351 #size-cells = <1>;
354 gmac0: ethernet-port@0 {
355 compatible = "cortina,gemini-ethernet-port";
356 reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
357 <0x6000a000 0x2000>; /* Port 0 GMAC */
358 interrupt-parent = <&intcon>;
362 clock-names = "PCLK";
365 gmac1: ethernet-port@1 {
366 compatible = "cortina,gemini-ethernet-port";
367 reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
368 <0x6000e000 0x2000>; /* Port 1 GMAC */
369 interrupt-parent = <&intcon>;
373 clock-names = "PCLK";
378 compatible = "cortina,sl3516-crypto";
379 reg = <0x62000000 0x10000>;
386 compatible = "cortina,gemini-pata", "faraday,ftide010";
387 reg = <0x63000000 0x1000>;
391 clock-names = "PCLK";
394 #address-cells = <1>;
395 #size-cells = <0>;
399 compatible = "cortina,gemini-pata", "faraday,ftide010";
400 reg = <0x63400000 0x1000>;
404 clock-names = "PCLK";
407 #address-cells = <1>;
408 #size-cells = <0>;
411 dma-controller@67000000 {
414 arm,primecell-periphid = <0x0003b080>;
415 reg = <0x67000000 0x1000>;
419 clock-names = "apb_pclk";
421 lli-bus-interface-ahb2;
422 mem-bus-interface-ahb2;
423 memcpy-burst-size = <256>;
424 memcpy-bus-width = <32>;
425 #dma-cells = <2>;
428 display-controller@6a000000 {
429 compatible = "cortina,gemini-tvc", "faraday,tve200";
430 reg = <0x6a000000 0x1000>;
435 clock-names = "PCLK", "TVE";
436 pinctrl-names = "default";
437 pinctrl-0 = <&tvc_default_pins>;
442 compatible = "cortina,gemini-usb", "faraday,fotg200";
443 reg = <0x68000000 0x1000>;
447 clock-names = "PCLK";
456 pinctrl-names = "default";
457 pinctrl-0 = <&usb_default_pins>;
465 compatible = "cortina,gemini-usb", "faraday,fotg200";
466 reg = <0x69000000 0x1000>;
470 clock-names = "PCLK";