Lines Matching +full:fsi +full:- +full:mux +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
3 #include "aspeed-g5.dtsi"
4 #include <dt-bindings/gpio/aspeed-gpio.h>
8 compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
19 stdout-path = &uart5;
27 reserved-memory {
28 #address-cells = <1>;
29 #size-cells = <1>;
33 no-map;
39 compatible = "w1-gpio";
40 gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
44 compatible = "w1-gpio";
45 gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
49 compatible = "w1-gpio";
50 gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
54 compatible = "w1-gpio";
55 gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
58 gpio-keys {
59 compatible = "gpio-keys";
61 event-checkstop {
63 gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
67 event-pcie-e2b-present{
68 label = "pcie-e2b-present";
69 gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
75 compatible = "gpio-leds";
79 gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>;
84 gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>;
89 gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>;
94 gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
98 fsi: gpio-fsi { label
99 compatible = "fsi-master-gpio", "fsi-master";
100 #address-cells = <2>;
101 #size-cells = <0>;
102 no-gpio-delays;
104 trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
105 enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
106 clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>;
107 data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>;
108 mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
111 iio-hwmon {
112 compatible = "iio-hwmon";
113 io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
119 iio-hwmon-battery {
120 compatible = "iio-hwmon";
121 io-channels = <&adc 12>;
132 m25p,fast-read;
133 spi-max-frequency = <50000000>;
134 #include "openbmc-flash-layout.dtsi"
140 pinctrl-names = "default";
141 pinctrl-0 = <&pinctrl_spi1_default>;
146 m25p,fast-read;
147 spi-max-frequency = <100000000>;
153 pinctrl-names = "default";
154 pinctrl-0 = <&pinctrl_spi2ck_default
167 pinctrl-names = "default";
168 pinctrl-0 = <&pinctrl_txd1_default
174 memory-region = <&flash_memory>;
180 snoop-ports = <0x80>;
190 pinctrl-names = "default";
191 pinctrl-0 = <&pinctrl_rmii1_default>;
194 clock-names = "MACCLK", "RCLK";
195 use-ncsi;
201 pinctrl-names = "default";
202 pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
234 i2c-mux@71 {
237 #address-cells = <1>;
238 #size-cells = <0>;
241 #address-cells = <1>;
242 #size-cells = <0>;
246 #address-cells = <1>;
247 #size-cells = <0>;
251 #address-cells = <1>;
252 #size-cells = <0>;
256 #address-cells = <1>;
257 #size-cells = <0>;
285 i2c-mux@71 {
288 #address-cells = <1>;
289 #size-cells = <0>;
292 #address-cells = <1>;
293 #size-cells = <0>;
297 #address-cells = <1>;
298 #size-cells = <0>;
335 i2c-arb {
336 #address-cells = <1>;
337 #size-cells = <0>;
384 power-brick@6a {
388 power-brick@30 {
462 /* MUX PI3USB102
471 bias-disable;
476 pinctrl-names = "default";
477 pinctrl-0 = <&pinctrl_gpioh_unbiased>;
479 gpio-line-names =
480 /*A0-A7*/ "","cfam-reset","","","","","","",
481 /*B0-B7*/ "","","","","","","","",
482 /*C0-C7*/ "","","","","","","","",
483 /*D0-D7*/ "fsi-enable","","","","","led-sys-boot-status","led-attention",
484 "led-fault",
485 /*E0-E7*/ "","","","","","","","presence-pcie-e2b",
486 /*F0-F7*/ "","","","","","","","checkstop",
487 /*G0-G7*/ "fsi-clock","fsi-data","","","","","","",
488 /*H0-H7*/ "onewire0","onewire1","onewire2","onewire3","","","","",
489 /*I0-I7*/ "","","","power-button","","","","",
490 /*J0-J7*/ "","","","","","","","",
491 /*K0-K7*/ "","","","","","","","",
492 /*L0-L7*/ "","","","","","","","",
493 /*M0-M7*/ "","","","","","","","",
494 /*N0-N7*/ "","","","","","","","",
495 /*O0-O7*/ "","","","","iso_u164_en","","fsi-trans","",
496 /*P0-P7*/ "ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","",
497 "","fsi-mux","",
498 /*Q0-Q7*/ "","","","","","","","",
499 /*R0-R7*/ "","","","","","","","",
500 /*S0-S7*/ "","","","","","","","",
501 /*T0-T7*/ "","","","","","","","",
502 /*U0-U7*/ "","","","","","","","",
503 /*V0-V7*/ "","","","","","","","",
504 /*W0-W7*/ "","","","","","","","",
505 /*X0-X7*/ "","","","","","","","",
506 /*Y0-Y7*/ "","","","","","","","",
507 /*Z0-Z7*/ "","","","","","","","",
508 /*AA0-AA7*/ "","","led-hdd-fault","","","","","",
509 /*AB0-AB7*/ "","","","","","","","",
510 /*AC0-AC7*/ "","","","","","","","";
513 gpio-hog;
514 gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
515 output-high;
519 gpio-hog;
520 gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
521 output-low;
525 gpio-hog;
526 gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
527 output-high;
531 gpio-hog;
532 gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
533 output-high;
547 pinctrl-names = "default";
548 pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
553 aspeed,fan-tach-ch = /bits/ 8 <0x00>;
558 aspeed,fan-tach-ch = /bits/ 8 <0x01>;
563 aspeed,fan-tach-ch = /bits/ 8 <0x02>;
568 aspeed,fan-tach-ch = /bits/ 8 <0x03>;
576 #include "ibm-power9-dual.dtsi"