Lines Matching +full:id +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0+
2 /dts-v1/;
3 #include "aspeed-g5.dtsi"
4 #include <dt-bindings/gpio/aspeed-gpio.h>
8 compatible = "ibm,romulus-bmc", "aspeed,ast2500";
11 stdout-path = &uart5;
19 reserved-memory {
20 #address-cells = <1>;
21 #size-cells = <1>;
25 no-map;
30 no-map;
36 no-map;
42 compatible = "shared-dma-pool";
49 compatible = "shared-dma-pool";
55 compatible = "gpio-leds";
58 gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
62 gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
66 gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
70 fsi: gpio-fsi {
71 compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
72 #address-cells = <2>;
73 #size-cells = <0>;
74 no-gpio-delays;
76 memory-region = <&coldfire_memory>;
80 clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
81 data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
82 mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
83 enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
84 trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
87 gpio-keys {
88 compatible = "gpio-keys";
90 event-checkstop {
92 gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
96 id-button {
97 label = "id-button";
98 gpios = <&gpio ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
103 iio-hwmon-battery {
104 compatible = "iio-hwmon";
105 io-channels = <&adc 12>;
113 m25p,fast-read;
115 spi-max-frequency = <50000000>;
116 #include "openbmc-flash-layout.dtsi"
122 pinctrl-names = "default";
123 pinctrl-0 = <&pinctrl_spi1_default>;
127 m25p,fast-read;
129 spi-max-frequency = <100000000>;
135 memory-region = <&flash_memory>;
140 /* Rear RS-232 connector */
143 pinctrl-names = "default";
144 pinctrl-0 = <&pinctrl_txd1_default
161 use-ncsi;
163 pinctrl-names = "default";
164 pinctrl-0 = <&pinctrl_rmii1_default>;
167 clock-names = "MACCLK", "RCLK";
234 gpio-line-names =
235 /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","",
236 /*B0-B7*/ "","","","","","","","",
237 /*C0-C7*/ "","","","","","","","",
238 /*D0-D7*/ "fsi-enable","","","nic_func_mode0","nic_func_mode1","","","",
239 /*E0-E7*/ "","","","","","","","",
240 /*F0-F7*/ "","","","","","","","",
241 /*G0-G7*/ "","","","","","","","",
242 /*H0-H7*/ "","","","","","","","",
243 /*I0-I7*/ "","","","power-button","","","","",
244 /*J0-J7*/ "","","checkstop","","","","","",
245 /*K0-K7*/ "","","","","","","","",
246 /*L0-L7*/ "","","","","","","","",
247 /*M0-M7*/ "","","","","","","","",
248 /*N0-N7*/ "","","led-fault","",
249 "led-identify","","","",
250 /*O0-O7*/ "","","","","","","","",
251 /*P0-P7*/ "","","","","","","","",
252 /*Q0-Q7*/ "","","","","","","","id-button",
253 /*R0-R7*/ "","","fsi-trans","","","led-power","","",
254 /*S0-S7*/ "","","","","","","","seq_cont",
255 /*T0-T7*/ "","","","","","","","",
256 /*U0-U7*/ "","","","","","","","",
257 /*V0-V7*/ "","","","","","","","",
258 /*W0-W7*/ "","","","","","","","",
259 /*X0-X7*/ "","","","","","","","",
260 /*Y0-Y7*/ "","","","","","","","",
261 /*Z0-Z7*/ "","","","","","","","",
262 /*AA0-AA7*/ "fsi-clock","","fsi-data","","","","","",
263 /*AB0-AB7*/ "","","","","","","","",
264 /*AC0-AC7*/ "","","","","","","","";
267 gpio-hog;
268 gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
269 output-low;
272 gpio-hog;
273 gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
274 output-low;
277 gpio-hog;
278 gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
279 output-low;
289 memory-region = <&gfx_memory>;
294 pinctrl-names = "default";
295 pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
299 aspeed,fan-tach-ch = /bits/ 8 <0x08>;
304 aspeed,fan-tach-ch = /bits/ 8 <0x09>;
309 aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
314 aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
319 aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
324 aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
329 aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
347 memory-region = <&video_engine_memory>;
350 #include "ibm-power9-dual.dtsi"