Lines Matching +full:init +full:- +full:b +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0+
2 /dts-v1/;
4 #include "aspeed-g4.dtsi"
5 #include <dt-bindings/gpio/aspeed-gpio.h>
9 compatible = "tyan,palmetto-bmc", "aspeed,ast2400";
12 stdout-path = &uart5;
20 reserved-memory {
21 #address-cells = <1>;
22 #size-cells = <1>;
26 no-map;
32 no-map;
36 no-map;
42 compatible = "gpio-leds";
45 gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
49 gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
53 gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
57 fsi: gpio-fsi {
58 compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master";
59 #address-cells = <2>;
60 #size-cells = <0>;
62 memory-region = <&coldfire_memory>;
66 clock-gpios = <&gpio ASPEED_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
67 data-gpios = <&gpio ASPEED_GPIO(A, 5) GPIO_ACTIVE_HIGH>;
68 mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
69 enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
70 trans-gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
73 gpio-keys {
74 compatible = "gpio-keys";
76 event-checkstop {
78 gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
88 m25p,fast-read;
90 spi-max-frequency = <50000000>;
91 #include "openbmc-flash-layout.dtsi"
97 pinctrl-names = "default";
98 pinctrl-0 = <&pinctrl_spi1debug_default>;
102 m25p,fast-read;
103 spi-max-frequency = <50000000>;
109 pinctrl-names = "default";
110 pinctrl-0 = <&pinctrl_flbusy_default &pinctrl_flwp_default
117 /* Rear RS-232 connector */
120 pinctrl-names = "default";
121 pinctrl-0 = <&pinctrl_txd1_default
138 use-ncsi;
140 pinctrl-names = "default";
141 pinctrl-0 = <&pinctrl_rmii1_default>;
175 occ-hwmon@50 {
176 compatible = "ibm,p8-occ-hwmon";
207 memory-region = <&flash_memory>;
213 gpio-hog;
214 gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
215 output-low;
216 line-name = "func_mode0";
220 gpio-hog;
221 gpios = <ASPEED_GPIO(C, 5) GPIO_ACTIVE_HIGH>;
222 output-low;
223 line-name = "func_mode1";
227 gpio-hog;
228 gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
229 output-low;
230 line-name = "func_mode2";
234 gpio-hog;
235 gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
237 line-name = "BMC_FAN_RESERVED_N";
241 gpio-hog;
242 gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
243 output-high;
244 line-name = "APSS_WDT_N";
248 gpio-hog;
249 gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
250 output-high;
251 line-name = "APSS_BOOT_MODE";
255 gpio-hog;
256 gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
257 output-high;
258 line-name = "APSS_RESET_N";
262 gpio-hog;
263 gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
264 output-high;
265 line-name = "SPIVID_STBY_RESET_N";
269 gpio-hog;
270 gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
271 output-high;
272 line-name = "BMC_POWER_UP";
276 gpio-hog;
277 gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
279 line-name = "BMC_BATTERY_TEST";
283 gpio-hog;
284 gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
286 line-name = "AST_HW_FAULT_N";
290 gpio-hog;
291 gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
293 line-name = "AST_SYS_FAULT_N";
297 gpio-hog;
298 gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
299 output-high;
300 line-name = "BMC_FULL_SPEED_N";
304 gpio-hog;
305 gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
306 output-high;
307 line-name = "BMC_FAN_ERROR_N";
311 gpio-hog;
312 gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
314 line-name = "BMC_WDT_RST1_P";
318 gpio-hog;
319 gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
321 line-name = "BMC_WDT_RST2_P";
325 gpio-hog;
326 gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
328 line-name = "PE_SLOT_TEST_EN_N";
332 gpio-hog;
333 gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
335 line-name = "BMC_RTCRST_N";
339 gpio-hog;
340 gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
341 output-high;
342 line-name = "SYS_PWROK_BMC";
346 gpio-hog;
347 gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
348 output-high;
349 line-name = "BMC_TPM_INT_N";
356 #address-cells = <1>;
357 #size-cells = <1>;
358 chip-id = <0>;
366 compatible = "ibm,fsi-master-hub";
368 #address-cells = <2>;
369 #size-cells = <0>;
370 no-scan-on-init;