Lines Matching +full:use +full:- +full:ncsi

1 // SPDX-License-Identifier: GPL-2.0+
3 /dts-v1/;
5 #include "aspeed-g5.dtsi"
6 #include <dt-bindings/gpio/aspeed-gpio.h>
10 	compatible = "inventec,lanyang-bmc", "aspeed,ast2500";
13 		stdout-path = &uart5;
21 	reserved-memory {
22 		#address-cells = <1>;
23 		#size-cells = <1>;
27 			no-map;
33 		compatible = "gpio-leds";
65 	fsi: gpio-fsi {
66 		compatible = "fsi-master-gpio", "fsi-master";
67 		#address-cells = <2>;
68 		#size-cells = <0>;
70 		clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>;
71 		data-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
72 		trans-gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
73 		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
74 		mux-gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
77 	iio-hwmon {
78 		compatible = "iio-hwmon";
79 		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
85 	iio-hwmon-battery {
86 		compatible = "iio-hwmon";
87 		io-channels = <&adc 12>;
93 	pinctrl-names = "default";
94 	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
99 		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
104 		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
109 		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
114 		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
122 		m25p,fast-read;
124 #include "openbmc-flash-layout.dtsi"
130 	pinctrl-names = "default";
131 	pinctrl-0 = <&pinctrl_spi1_default>;
136 		m25p,fast-read;
142 	pinctrl-names = "default";
143 	pinctrl-0 = <&pinctrl_spi2ck_default
156 	pinctrl-names = "default";
157 	pinctrl-0 = <&pinctrl_txd1_default
163 	memory-region = <&flash_memory>;
169 	snoop-ports = <0x80>;
179 	pinctrl-names = "default";
180 	pinctrl-0 = <&pinctrl_rmii1_default>;
183 	clock-names = "MACCLK", "RCLK";
184 	use-ncsi;
190 	pinctrl-names = "default";
191 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
268 		gpio-hog;
270 		output-high;
271 		line-name = "BMC_HDD1_PWR_EN";
275 		gpio-hog;
278 		line-name = "BMC_USB1_OCI2";
282 		gpio-hog;
284 		output-high;
285 		line-name = "BMC_CP0_PERST_ENABLE_R";
289 		gpio-hog;
291 		output-high;
292 		line-name = "RST_PCA9546_U177_N";
296 		gpio-hog;
298 		output-high;
299 		line-name = "BMC_CP0_RESET_N";
303 		gpio-hog;
305 		output-high;
306 		line-name = "BMC_TPM_RESET_N";
310 		gpio-hog;
312 		output-high;
313 		line-name = "BMC_USB_PWRON_N";
325 #include "ibm-power9-dual.dtsi"