Lines Matching +full:i2c +full:- +full:thermtrip
1 // SPDX-License-Identifier: GPL-2.0-or-later
4 /dts-v1/;
6 #include "aspeed-g6.dtsi"
7 #include "aspeed-g6-pinctrl.dtsi"
8 #include <dt-bindings/i2c/i2c.h>
9 #include <dt-bindings/gpio/aspeed-gpio.h>
13 compatible = "inventec,starscream-bmc", "aspeed,ast2600";
20 stdout-path = &uart5;
28 reserved-memory {
29 #address-cells = <1>;
30 #size-cells = <1>;
36 compatible = "shared-dma-pool";
42 compatible = "gpio-leds";
44 led-uid {
49 led-heartbeat {
59 ethphy0: ethernet-phy@0 {
60 compatible = "ethernet-phy-ieee802.3-c22";
67 pinctrl-names = "default";
68 phy-mode = "rmii";
69 pinctrl-0 = <&pinctrl_rmii3_default>;
70 use-ncsi;
75 phy-mode = "rgmii";
76 phy-handle = <ðphy0>;
77 pinctrl-names = "default";
78 pinctrl-0 = <&pinctrl_rgmii4_default>;
85 m25p,fast-read;
87 spi-max-frequency = <50000000>;
88 spi-tx-bus-width = <4>;
89 spi-rx-bus-width = <4>;
90 #include "openbmc-flash-layout.dtsi"
95 m25p,fast-read;
97 spi-max-frequency = <50000000>;
98 spi-tx-bus-width = <4>;
99 spi-rx-bus-width = <4>;
105 pinctrl-names = "default";
106 pinctrl-0 = <&pinctrl_spi1_default>;
110 m25p,fast-read;
112 spi-max-frequency = <50000000>;
113 spi-tx-bus-width = <4>;
114 spi-rx-bus-width = <4>;
135 aspeed,lpc-io-reg = <0xca2>;
159 // I2C EXPANDER
160 i2c-mux@71 {
162 #address-cells = <1>;
163 #size-cells = <0>;
166 i2c@0 {
167 #address-cells = <1>;
168 #size-cells = <0>;
170 // AMD SB-TSI CPU1
177 i2c@1 {
178 #address-cells = <1>;
179 #size-cells = <0>;
181 // AMD SB-TSI CPU2
193 // I2C EXPANDER U153
194 i2c-mux@70 {
196 #address-cells = <1>;
197 #size-cells = <0>;
200 usb_hub: i2c@0 {
201 #address-cells = <1>;
202 #size-cells = <0>;
206 riser1: i2c@1 {
207 #address-cells = <1>;
208 #size-cells = <0>;
212 riser2: i2c@2 {
213 #address-cells = <1>;
214 #size-cells = <0>;
218 i2c@3 {
219 #address-cells = <1>;
220 #size-cells = <0>;
230 temperature-sensor@4e {
236 temperature-sensor@49 {
244 // I2C EXPANDER U40
245 i2c-mux@70 {
247 #address-cells = <1>;
248 #size-cells = <0>;
251 i2c@0 {
252 #address-cells = <1>;
253 #size-cells = <0>;
257 i2c@1 {
258 #address-cells = <1>;
259 #size-cells = <0>;
263 i2c@2 {
264 #address-cells = <1>;
265 #size-cells = <0>;
269 i2c@3 {
270 #address-cells = <1>;
271 #size-cells = <0>;
309 temperature-sensor@4f {
317 gpio-line-names =
318 /*A0-A7*/ "","","","","","","","",
319 /*B0-B7*/ "alert-psu0-smb-r-n","bmc-ready","","assert-cpu0-prochot-r-n",
321 /*C0-C7*/ "","","","","","","","",
322 /*D0-D7*/ "","","","","","","","",
323 /*E0-E7*/ "","","","","","","","",
324 /*F0-F7*/ "","","","","reset-sgpio-r-n","","","",
325 /*G0-G7*/ "","","scm-jtag-mux-select","","","","","",
326 /*H0-H7*/ "","","","","reset-out","power-out","","",
327 /*I0-I7*/ "","","","","","","irq-bmc-cpu0-buf-nmi-n","",
328 /*J0-J7*/ "","","","","","","","",
329 /*K0-K7*/ "","","","","","","","",
330 /*L0-L7*/ "","","","","","","","",
331 /*M0-M7*/ "","","","","","","","",
332 /*N0-N7*/ "","","ncsi-ocp-clk-en-n","","","","","",
333 /*O0-O7*/ "","","","","","","cpu1-thermal-trip-n","",
334 /*P0-P7*/ "","","","","","","","",
335 /*Q0-Q7*/ "cpu0-prochot-n","","cpu1-prochot-n","","cpu0-pe-rst0","","","",
336 /*R0-R7*/ "","","","","","","","",
337 /*S0-S7*/ "","","","",
338 "","PCH_SLP_S4_BMC_N","cpu0-thermtrip-n","alert-psu1-smb-r-n",
339 /*T0-T7*/ "","","","","","","","",
340 /*U0-U7*/ "","","","","","","","",
341 /*V0-V7*/ "bios-recovery-buf-n","","assert-cpu1-prochot-r-n","",
342 "power-chassis-good","","","",
343 /*W0-W7*/ "","","","","","","","",
344 /*X0-X7*/ "","","","","platform-type","","","",
345 /*Y0-Y7*/ "","","","","","","","",
346 /*Z0-Z7*/ "","cpld-power-break-n","","","","","","",
347 /*AA0-AA7*/ "","","","","","","","",
348 /*AB0-AB7*/ "","","","","","","","",
349 /*AC0-AC7*/ "","","","","","","","";
355 bus-frequency = <1000000>;
360 snoop-ports = <0x80>;
369 non-removable;
370 max-frequency = <52000000>;
371 bus-width = <8>;
376 memory-region = <&video_engine_memory>;
381 aspeed,vhub-downstream-ports = <7>;
382 aspeed,vhub-generic-endpoints = <21>;
383 pinctrl-names = "default";
384 pinctrl-0 = <&pinctrl_usb2ad_default>;