Lines Matching +full:non +full:- +full:removable
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
8 #include "sunxi-common-regulators.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
18 stdout-path = "serial0:115200n8";
22 compatible = "mmc-pwrseq-simple";
23 reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
24 post-power-on-delay-ms = <200>;
26 clock-names = "ext_clock";
31 cpu-supply = <&vdd_cpux>;
78 vmmc-supply = <®_vcc3v3>;
79 bus-width = <4>;
80 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
86 vmmc-supply = <®_vcc3v3>;
87 vqmmc-supply = <®_vcc3v3>;
88 mmc-pwrseq = <&wifi_pwrseq>;
89 bus-width = <4>;
90 non-removable;
95 compatible = "brcm,bcm4329-fmac";
96 interrupt-parent = <&r_pio>;
98 interrupt-names = "host-wake";
103 pinctrl-names = "default";
104 pinctrl-0 = <&mmc2_8bit_pins>;
105 vmmc-supply = <®_vcc3v3>;
106 bus-width = <8>;
107 non-removable;
108 cap-mmc-hw-reset;
113 pinctrl-names = "default";
114 pinctrl-0 = <&uart0_pa_pins>;
120 pinctrl-names = "default";
121 pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
122 uart-has-rtscts;
126 compatible = "brcm,bcm43438-bt";
128 clock-names = "lpo";
129 vbat-supply = <®_vcc3v3>;
130 vddio-supply = <®_vcc3v3>;
131 shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
132 device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
137 pinctrl-names = "default";
138 pinctrl-0 = <&uart2_pins>;
143 pinctrl-names = "default";
144 pinctrl-0 = <&uart3_pins>;
149 usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
150 usb0_vbus-supply = <®_usb0_vbus>;
160 allwinner,audio-routing =