Lines Matching full:only

11 This section describes each of them. Please notice, however, that only
65   #. In ISDB-Tsb, the channel consists of only one or three segments the
95 DVB-S			No need to set. It supports only QPSK.
119 Should be set only for terrestrial delivery systems.
281 Used only on ISDB.
301 Used only on ISDB.
315 Used only on ISDB.
317 This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
352 Used only on ISDB.
354 This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
370 Used only on ISDB.
372 This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'.
387 Used only on ISDB.
405 Used only on ISDB.
417 In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb according
421 Only the values of the first 3 bits are used. Other bits will be silently ignored:
437 Used only on ISDB.
452 Used only on ISDB.
472 Used only on ISDB.
563 Used only on ISDB.
638 Used only on ATSC-MH.
653 Used only on ATSC-MH.
668 Used only on ATSC-MH.
680 Used only on ATSC-MH.
693 Used only on ATSC-MH.
705 Used only on ATSC-MH.
717 Used only on ATSC-MH.
729 Used only on ATSC-MH.
741 Used only on ATSC-MH.
753 Used only on ATSC-MH.
765 Used only on ATSC-MH.
777 Used only on ATSC-MH.
788 Used only on ATSC-MH.
801 Used only on ATSC-MH.
814 Used only on ATSC-MH.
862    #. Interval ``GUARD_INTERVAL_1_64`` is used only for DVB-C2.
865       used only for DVB-T2.
867       ``GUARD_INTERVAL_PN945`` are used only for DMTB at the present.
868       On such standard, only those intervals and ``GUARD_INTERVAL_AUTO``
877 Used only on OFTM-based standards, e. g. DVB-T/T2, ISDB-T, DTMB.
913 Used only on DVB-T and DVB-T2.
987 that parameter. Usually LNA could be found only from terrestrial devices