Lines Matching refs:was

102       - Timestamp in ns of when the last byte of the message was transmitted.
107       - Timestamp in ns of when the last byte of the message was received.
115 	filled in by the driver with the length of the reply message if ``reply`` was set.
132 	was not 0), then the ``sequence`` field of the reply will be set to the sequence
143 	the payload of the reply message if ``timeout`` was set.
263       - The message was transmitted successfully. This is mutually
266 	the transmit was eventually successful.
271       - CEC line arbitration was lost, i.e. another transmit started at the
278       - Message was not acknowledged. Note that some hardware cannot tell apart
286       - Low drive was detected on the CEC bus. This indicates that a
309       - The transmit was aborted due to an HDMI disconnect, or the adapter
310         was unconfigured, or a transmit was interrupted, or the driver
332       - The message was received successfully.
342       - The message was received successfully but the reply was
344 	was the reply to an earlier transmitted message.
349       - The wait for a reply to an earlier transmitted message was aborted
350         because the HDMI cable was disconnected, the adapter was unconfigured
352 	reply was interrupted.
369     The ``timeout`` was reached while waiting for a message.
372     The wait for a message was interrupted (e.g. by Ctrl-C).
382     has never been called, or ``CEC_MSG_FL_RAW`` was used from a process that
387     was called, but the physical address is invalid so no logical address was claimed.
400     The wait for a successful transmit was interrupted (e.g. by Ctrl-C).